• Analytical Science and Technology
• /
• v.22 no.2
• /
• pp.186-190
• /
• 2009

The oxidation studies of a sulfur to a sulfate ion by various oxyhalide oxidants in organic (thiourea, methionine) and inorganic (sulfate, thiophosphate) compounds were carried out in an acidic solution. The optimized result of the oxidation reaction was obtained when a bromate compound (${BrO_3}^-$) as an oxidant and a 3 M $HNO_3$ solvent were used. The chemical yield for the oxidation of the organic and inorganic sulfur compounds to a sulfate ion was monitored as 80% for thiophosphate, 87% for methionine, and 100% for thiourea and sulfate within 5% RSD. The oxidations of thiourea required at least 1.6 equivalents of the bromate in an acidic solution. In the case of the oxidation of methionine and thiophosphate, the oxidation yields were above 80% if the bromate was used at 20 times higher than that of the substrates. The sulfate ion was quantitatively measured by using a GPC counting of $^{35}S$ followed by precipitates of $BaSO_4$. A quenching correction curve for the $^{35}S$ counting was obtained to use the difference via the precipitate weight result.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.8
• /
• pp.1080-1084
• /
• 2002

Carcass characteristics of 241 crossbred pigs (Korean wild boars ${\times}$ Landrace sows) were analyzed to examine variations in fasted body weight (FASTWT), carcass weight (CARCWT), dressing percentage (DP), back fat thickness (BFT) and longissimus muscle weight (LMW), and to estimate genetic and phenotypic parameters using three different slaughter-end points. Covariates in the least squares full sib model were slaughter age, fasted body weight and back fat thickness of the carcass. Coefficient of variation was highest for BFT followed by LMW, CARCWT, FASTWT and DP in magnitude. Regressions of three covariates on traits were all linear. However, slaughter age was not significant as a linear covariate for five traits while FASTWT was significant for CARCWT and LMW and BFT was significant for all remaining traits. Genetic and phenotypic variation was considerably reduced by regressing FASTWT or BFT in the model. Heritability estimates of FASTWT, CARCWT, DP and BFT were 0.68, 0.61, 0.11 and 0.49, respectively, using slaughter age as covariate (model 1). Those of CARCWT, DP, BFT and LMW were 0.15, 0.15, 0.30 and 0.11, respectively, using FASTWT as covariate (model 2). Heritability estimates of the traits using LMW as covariate (model 3) were similar to the estimates from Model 1 except that the estimate of CARCWT was reduced to 0.39. Genetic or phenotypic correlations among FASTWT, CARCWT and BFT were all positive and moderate to high. Those between BFT and LMW were also positive and low to moderate. However, genetic and phenotypic correlations between DP and CARCWT were positive while those between DP and FASTWT were negative. It was suggested from this study that differences in carcass yield traits be determined using slaughter age or back fat thickness as slaughter-end point and carcass quality traits using fasted body weight as slaughter-end point.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.11
• /
• pp.1616-1623
• /
• 2008

This study was conducted to determine the effect of hot environment and dietary crude protein level (CP) on performance, carcass characteristics, meat visual quality, muscle chemical composition and malondialdehyde (MDA) concentration of tissues in broilers. Two hundred and sixteen 21-d old Arbor Acre broilers were used in a $4\times3$ factorial arrangement and randomly reared in 4 environmental chambers and fed on 3 diets with different CP levels for 3 weeks. The results showed: (1) when air temperature (AT) rose to $33^{\circ}C$, average daily feed intake, average daily gain, carcass weight, right breast meat weight, left thigh and drumstick meat weight decreased (p<0.05) and feed conversion rate decreased (p<0.05), but the ratio of carcass to live weight and of left thigh and drumstick meat weight to carcass weight increased (p<0.05). (2) There were significant differences in pH and shear force in breast meat, and shear force, L* and a* in thigh meat (p<0.01 or 0.05) among hot environments. Dietary CP level tended to affect breast meat pH and pH and L* of thigh meat (p<0.06 or 0.09). Compared to the normal temperature ($22^{\circ}C$), low temperature ($15^{\circ}C$) and hot humid (AT $33^{\circ}C$, relative humidity (RH) 80%) treatments significantly (p<0.05) decreased the tenderness of thigh meat. L* and a* value in thigh meat under high temperature treatments, regardless of RH, were higher (p<0.05) than those under normal temperature. (3) Protein content in breast and thigh meat of broilers fed under high temperature ($33^{\circ}C$) was lower (p<0.05) than that under $22^{\circ}C$, but fat content had an adverse change. High temperature ($33^{\circ}C$) increased the moisture of breast meat significantly (p<0.05). Protein content in breast meat increased significantly (p<0.05), in which fat content had an adverse change (p<0.05), when the dietary protein rose. (4) MDA concentration in liver and breast meat under hot humid (AT $33^{\circ}C$, RH 80%) treatment increased markedly (p<0.05). (5) High humidity could sharpen the bad effect of high temperature on performance, carcass yield and choice cuts, crude protein and moisture content in breast meat. It was concluded that a hot environment could affect the performance and meat quality of broiler chicks more significantly than CP level and that high humidity would aggravate the bad influence of high temperature on the broiler.

• Korean Journal of Organic Agriculture
• /
• v.24 no.2
• /
• pp.235-251
• /
• 2016

After carrying out on-the-spot observation targeting each farmhouse of large-scale environment-friendly agricultural district (LEAD), Suncheon, Sancheong, Jangheung, Yeongam, Hamyang, Okcheon, and Jeongseon in 2015, only one LEAD, a farmhouse in Jangheung had used sustainable compost coming out under their own non-antibiotic livestock. The soil pH and EC at a depth of 0-20 cm in the seven LEADs were ranged between 5.3-6.6 and $0.4-1.2dS\;m^{-1}$, respectively, with 0.03- 0.27% for T-N concentration, $22-322mg\;kg^{-1}$ for P, and $0.05-0.29mg\;kg^{-1}$, which were, in particular, low a farmhouse in Jeongseon. When intensively surveying on each farmhouse of Suncheon, Jangheung, and Okcheon for a growing period, seasonal soil pH was maintained above 6.0 and high in a farmhouse in Okcheon, with similar soil EC observed among the three LEADs. Seasonal soil T-N was 0.1% higher on the farmhouse in Suncheon than other two LEADs, with higher seasonal soil P observed on the farmhouse in Okcheon and higher soil K in the Jangheung. T-N concentration in rice (Oryza sativa L.) crops was the highest in Jangheung, and concentrations of T-N, P, and K decreased in a season. Plant height and number of tillers per hill were the highest on the farmhouse in Okcheon, where was similar or low plant diameter and SPAD levels compared to other two LEADs. Dry weight (DW) before harvest was ranged between 52-63 g, and DW, rough rice yield (kg), brown rice/rough rice (%), brown rice yield (kg), head rice (%), and broken rice (%) were not significantly different among the three LEADs. Total annual gross production ha-1 was the highest on the farmhouse in Okcheon (16,230,000 won) planting with high class of variety, 'Milky queen' at early maturation, which was expected to be increased on an agricultural income. However, high amount of fertilizer was applied for growing the following crops on the farmhouse in Okcheon, affecting the highest balance of T-N, P, and K more than $200kg\;ha^{-1}$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.22 no.2
• /
• pp.208-214
• /
• 1993

Ginseng-whey beverages were prepared with rennet whey, ginseng, sweetener, honey and Japanese apricot, inoculated with different strains of lactic acid bacteria or unfermented partly. The samples were stored at 4$^{\circ}C$ or 30$\pm$1$0^{\circ}C$ and then physicochemical and microbiological properties were investigated. The yield of whey was 78.8%. The pH-values reduced and acidities increased during the storage period. The contents of solid-substances, ash and lipid in ginseng-whey beverages were 7.90~8.20%, 0.62~0.66% and 0.16%, respectively. The protein contents of ginseng-whey beverages were 0.42~0.56% and the contents were not changed during the storage period. The lactose contents of fermented beverages were higher than those of unfermented beverages. During the storage period (1~5 weeks), the ranges of D(-) - and L(+)- lactic acid contents in fermented ginseng-whey beverages (17.3~156.1 mg/100g, 347.3~1894.2mg/100g) were higher than those of unfermented ginseng-whey beverages (6.2~82.8mg/100g, 7.1~885.5mg/100g). The contents of total saponin in unfermented sample and fermented sample (Lac. casei sub-sp. casei+Str. salivarius sub-sp. thermophilus) were increased during the storage period. But, those of the fermented sample(Lac. acidophilus+Lac. delbrueckii sub-sp. bulgaricus) were reduced. In the electrophoretic results of ginseng-whey beverages, an $\alpha$-lactalbumin and a $\beta$-lactoglobulin bands were shown apparently and there were no changes observed during the storage period. During the storage period (1~3 week) the coliform was not detected and total plate counts and psychrotrophs were increased according to the storage period.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2019

"Jungmo2510", a rye cultivar, Secale cereal L., was developed by National Institute of Crop Science, RDA in 2015. It was developed from open pollination from within 10 rye cultivars or lines including "Chochun" in 1995. The line "SR95POP-S1-523-1-5-5-4-7-3-B-16-3-19" was selected for its excellent agronomic appearance and was placed in yield trials for two years from 2011 to 2012. The line was designated "Homil55" and was placed in regional yield trials at the four locations around Korea from 2013 to 2015, during which time the name "Jungmo2510" was given. This cultivar is an erect plant type and leaves of short and broad size with a green color, a yellow colored, medium-diameter culm, and a yellowish brown-colored, medium-size grain. The heading date of "Jungmo2510" was April 16, which were 2 days earlier than that of "Gogu". "Jungmo2510" also showed similar to winter hardiness and greater resistance to lodging compared to those of the check cultivar. Over three years, the average dry matter yield of "Jungmo2510" was 802 kg 10a^-1 , which was harvested in late April and was lower than that of the check cultivar "Gogu" (825 kg). The seed productivity of "Jungmo2510" was approximately 481 kg 10a^-1 , which was 2.4% less than that of the check. "Jungmo2510" was higher to than "Gogu" in term of protein content (9.1% and 8.0%, respectively), total digestible nutrients(TDN)(57.5% and 55.5%, respectively), and TDN yield 10a^-1(419 kg and 392 kg, respectively). This cultivar is recommended as a fall sowing crop in areas where the average daily minimum-mean temperatures are higher than -12 ℃ in January, and as a winter crop for whole-crop forage before the planting of rice or green manure around Korea.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.2
• /
• pp.133-143
• /
• 2015

This paper describes the test results and nonlinear analysis of reinforced concrete T-beams strengthened by bonded steel plates under increasing static loading conditions. The first part of this paper discusses the flexural tests on five T-beams, including the test model design (based on similarity principles), test programs, and test procedure. The second part discusses the nonlinear numerical analysis of the strengthened beams, in which a concrete damage plasticity model and a cohesive behavior were adopted. The numerical analysis results are compared with experimental data and show good agreement. The area of bonded steel plate and the anchor bolt spacing were found to have an impact on the cracking load, yield load, and ultimate load. An increase in the area of steel plate and a reduction of the anchor spacing could significantly improve the cracking and ultimate loads and decrease the damage of the beam.

• Microbiology and Biotechnology Letters
• /
• v.10 no.1
• /
• pp.45-52
• /
• 1982

A fungus with the highest protopectinase productivity was selected among 205 strains isolated from the soil and identified as a Verticillium sp. The Verticillium sp. was cultivated on wheat bran and the crude extruct of its culture medium showed the highest protopectinase activity on the following conditions: 3 days of cultivation time, 27$^{\circ}C$ of cultivation temperature, 1.2 $m\ell$/g wheat bran of water content, and reinforcement of ammonium nitrate and calcium chloride at the concentration of 0.5 and 0.02%, respectively. The optimum conditions for pectin production from Citrus peel pulp by the protopectinase were consequently obtained as follows: 20$m\ell$/g of liquid volume-to-pulp weight ratio, 4$0^{\circ}C$ of reaction temperature, and 4 of reaction pH. The higher the enzyme concentration, the better the yield of pectin and the shorter the reaction time. Total 45.6mg of pectin/g peel was produced by 1 hour reaction at the enzyme concentration of 10.5 units/$m\ell$. Molecular weight of the pectin produced by the enzyme was estimated to be about 62,000 by Smit and Bryant's method.

• KSBB Journal
• /
• v.26 no.6
• /
• pp.552-556
• /
• 2011

A novel agar-degrading bacterium mbrc-1 was isolated from seashore of Kyungpo at Gangwon province and cultured in marine broth 2216 medium. Isolated bacterium mbrc-1 was named as Flammeovirga sp. mbrc-1 based on the 16S rDNA sequence. Its agarase showed maximum activity of 923 units/L at pH 7.0 and $45^{\circ}C$ and sustained 90% remaining activity after exposed to $45^{\circ}C$ for 2 hours. The enzyme hydrolyzed agarose to yield neoagarohexaose (18.5%), neoagarotetraose (38%) and neoagarobiose (43.5%), indicating that the enzyme is ${\beta}$-agarase. Thus, isolated bacterium and its ${\beta}$-agarase would be useful for the industrial production of neoagarotetraose and neoagarobiose.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.657-658
• /
• 2006

Although there are many numerical models to simulate fs laser ablation of metals, no model can analyze the ablation phenomena over a wide range of fluence. In this work, a numerical code for simulating the fs laser ablation phenomena of metals has been developed. The two temperature model is employed to predict the ablation rate and the crater shape of metals using phase explosion mechanism in the relatively high fluence regime. Also, the ultrashort thermoelastic model is used for the low fluence regime to account for spallation of the sample by high strain rate. It has been demonstrated that the thermoelastic stress generated within the sample can exceed the yield stress of the material even near the threshold fluence. Numerical computation results are compared with the experiment for Cu and Ni and show good agreement. Discussions are made on the hydrodynamic model considering phase change and hydrodynamic flow.