• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.362-367
• /
• 2005

On the basis of high osmotic tolerance and xylitol production, a novel yeast strain was screened from soils of rice farming. The isolated strain HY200 was systematically characterized by using general approaches of Biolog Microlog$^{TM}$ and 18S rRNA sequence analyses, and consequently was designated as Candida tropicalis HY200. Under formulated culture conditions, relatively high xylitol yield ($77\%$) and productivity (2.57 g/l$\codt$h) were obtained, in practice, when 200 g/l of xylose was supplemented. In the utilization of nitrogen, inorganic compounds could not serve as nitrogen sources. As a promising phenotype, HY200 steadily flocculated during and/or after growing in the formulated medium. The extent of flocculation was partly affected by nitrogen sources. However, regardless of the kinds of carbon source fed, the flocculent cells were always observed at the end of the exponential growth phase. These observations strongly suggest that the strain HY200 could effectively be used as a potential candidate for the production of xylitol from xylose, especially in repeated batch mode, because of its flocculation ability and tolerance to high substrate concentrations.

• Journal of Applied Biological Chemistry
• /
• v.59 no.4
• /
• pp.289-298
• /
• 2016

FK506 hyper-yielding mutant, called the TCM8594 strain, was made from Streptomyces tsukubaensis NRRL 18488 by mutagenesis using N-methyl-N'-nitro-N-nitrosoguanidine, ultraviolet irradiation, and FK506 sequential resistance selection. FK506 production by the TCM8594 strain improved 45.1-fold ($505.4{\mu}g/mL$) compared to that of S. tsukubaensis NRRL 18488 ($11.2{\mu}g/mL$). Among the five substrates, wheat bran was selected as the best solid substrate to produce optimum quantities of FK506 ($382.7{\mu}g/g$ substrate) under solid-state fermentation, and the process parameters affecting FK506 production were optimized. Maximum FK506 yield ($897.4{\mu}g/g$ substrate) was achieved by optimizing process parameters, such as wheat bran with 5 % (w/w) dextrin and yeast extract as additional nutrients, 70 % (v/w) initial solid substrate moisture content, initial medium pH of 7.2, $30^{\circ}C$ incubation temperature, inoculum level that was 10 % (v/w) of the cell mass equivalent, and a 10 day incubation. The results showed an overall 234 % increase in FK506 production after optimizing the process parameters.

• Computers and Concrete
• /
• v.22 no.2
• /
• pp.183-196
• /
• 2018

The rheological behaviour of high strength self compacting concrete (HS-SCC) studied through an experimental investigation is presented in this paper. The effect of variation in supplementary cementitious materials (SCM) $vis-{\grave{a}}-vis$ four different types of processed crushed sand as fine aggregates is studied. Apart from the ordinary Portland cement (OPC), the SCMs such as fly ash (FA), ground granulated blast furnace slag (GGBS) ultrafine slag (UFS) and micro-silica (MS) are used in different percentages keeping the mix -paste volume and flow of concrete, constant. The combinations of rheology, strength and durability are equally important for selection of mixes in respect of high-rise building constructions. These combinations are referred to as the rheo-strength and rheo-durability which is scientifically linked to performance based rating. The findings show that the fineness of the sands and types of SCM affects the rheo-strength and rheo-durability performance of HS-SCC. The high amount of fines often seen in fine aggregates contributes to the higher yield stress. Further, the mixes with processed sand is found to offer better rheology as compared to that of mixes made using unwashed crushed sand, washed plaster sand, washed fine natural sand. The micro silica and ultra-fine slag conjunction with washed crushed sand can be a good solution for high rise construction in terms of rheo-strength and rheo-durability performance.

• ALGAE
• /
• v.24 no.2
• /
• pp.121-127
• /
• 2009

The unicellular green alga, Haematococcus pluvialis, accumulates the highest level of astaxanthin among knownastaxanthi.n-producing organisms. Light is the most important factor to induce astaxanthin by H. pluvialis. BIue andred LEDs, whose ${\lambda}_{max}$'s are 470 and 665 nm, respectively, were used for internally illuminated light sources.Fluorescent lamps were also used for both internal and external illumination sources. The astaxanthin levels in thesevarious lighting systems were analyzed and compared each other. The cultures under internally illuminated LEDsaccumulaled 20% more astaxanthin than those under fluorescent lamp. Furthermore, LEDs generated much lessheat than the fluorescent lamps, which gives one more reason for the LEDs being a suitable internal Light source forastaxanthin induction. The results reported here would lead novel designs of photobioreactors with improvementsof illumination methods for high level of astaxanthm production. The maximum astaxanthin concentrations as wellas the astaxanthin yield per supplied photon were increased by at least 20% when blue or red LEDs were supplied.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.2
• /
• pp.139-146
• /
• 1994

In the molten state, magnesium alloys vigousey react with oxygen in the air, is protected from oxidation and burning by the addition of $SF_6$ to $CO_2$ atmosphere over the melt. The mechanical properties and metallographic examinatin have made of Mg-Al alloys containing 3, 6, 9% in the solution treated state and precipitated state, comparing mechanical properties obtained during unidirectional solidification with me chanical properties obtained during conventional casting. For a given solution treatment, a higher aluminum contents produce more or less fine grains in conventional casting. For a given artifical aging treatment, a higher aluminum contents produces much precitates at the grain boundary as well as within the grain in unidirectional solidification. As a result of this experiment, for a given heat treatment, the higher is aluminum contents the higher is the ultimate tensile strength, yield strength, hardness while the lower the elongation. Also the mechanical properties of unidirectional solidification is larger than that of conventional casting.

• Korean Journal of Animal Reproduction
• /
• v.11 no.1
• /
• pp.16-21
• /
• 1987

We describe a simple, solid-phase chemiluminescence immunoassay for the meausrement of serum T4. An immunoglobulin G fraction of antibody to thyroxine was passively absorbed onto the walls of polystyrene tubes. The labeled antigen was thyroxine-aminobutylethylisoluminol. After the bindings reaction (37$^{\circ}C$ for 1 hour), the solution is removed by aspiration and the antibody-bound fraction was washed once with buffer. Sodium hydroxide (5mol/1,200${mu}ell$) was added and the mixture incubated for 30 minutes at 6$0^{\circ}C$. Luminescence was initiated by oxidation of the label with micropeeroxidase-hydrogen peroxide and the signal of light emission was intergrated for 10 sec. The light yield was inversely proportional to the concentration of T4 in the standard or sample. An evaluation of the method gave the following values sensitivity of calibration curve 7.5$\pm$2.8 nmol/l (mean$\pm$SD). The intra-assay precision (CV%) was 8.9, 7.3 and 5.4. The inter-assay precision (CV%) was 10.2, 8.1 and 7.1. When seum samples were assayed for T4, the results obtained by solid-phase CIA and the conventional RIA agreed well(n=3.5, r=0.954).

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.109-114
• /
• 2005

A bacterium capable of emulsifying hydrocarbon, n-hexadecane, and decreasing surface tension of the culture media using oil collapsing method was isolated. The bacterium was partially identified as Bacillus sp. and named BJS-51. n-Hexadecane was the most effective carbon source for production of biosurfactant. Surface tension was decreased from 76 dyne/cm to 31 dyne/cm and CMD (critical micelle dilution) had the highest value of 5.7 at 3% n-hexadecane. Ammonium phosphate was the most effective nitrogen source, when C/N ratio was 60, surface tension and CMD were 29 dyne/cm and 9.2, respectively. Optimum pH and temperature were 7.2 and $30^{\circ}C$, respectively. Produced biosurfactant was extracted and purified using organic solvent extraction method and preparative HPLC systems. After analysis by various color reaction, this biosurfactant was identified as lipopolysaccharide. Surface tension and CMC (critical micelle concentration) of purified biosurfactant were 27 dyne/cm and 0.08 g/l, repectively. CMD was 9.2, so the yield of biosurfactant was about 0.74 g/l at the optimal conditions. The biosurfactant was very stable at wide range of $pH\;2{\sim}12$ with surface tension $29{\sim}31\;dyne/cm$ and showed $29{\sim}30\;dyne/cm$ of surface tension after heat treatment at $100^{\circ}C$ for 60 min.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.1
• /
• pp.15-20
• /
• 2003

The present investigation was carried out to study the possible cause for reciprocal difference in silkworm hybrids. By utilising the polyvoltine race Pure Mysore (PM) and newly evolved breeds (CSR2, CSR5, CSR16 and CSR17), the direct and reciprocal crosses of polyvoltine ${\times}$ bivoltine and also bivoltine hybrids were studied. The hybrids of polyvoltine ${\times}$ bivoltine (direct) are superior to their reciprocal crosses in respect of cocoon yield, cocoon weight and filament length. The reciprocal crosses of polyvoltine ${\times}$ bivoltine are superior to their direct crosses in respect of fecundity and short larval duration. No significant differences were observed in the characters like cocoon shell ratio, raw silk percentage, denier, reelability and neatness in both polyvoltine ${\times}$ bivoltine direct crosses and their reciprocals. The expression of cocoon characters as a function of sex revealed that direct crosses (polyvoltine ${\times}$ bivoltine) showed higher cocoon weight, pupal weight, shell weight and longer filament length in females than the reciprocal crosses (bivoltine ${\times}$ polyvoltine), where as these characters in males were almost the same in both direct and reciprocal crosses, indicating that the sex-linked genetic factor played a more important role. it was clear that difference in cocoon yield observed in reciprocal crosses of polyvoltine ${\times}$ bivoltine was due to the low cocoon and shell weight in females which was turn due to presence of early maturity genes (Lme) linked with sex-chromosome (X) which effect on larvae period of the silkworm. In bivoltine hybrids, i.e., both direct and their reciprocals crosses, all the characters viz., hatching percentage, larval duration, survival, cocoon weight, cocoon shell weight, cocoon shell ratio, raw silk percentage, filament length, denier, reelability and neatness did not show any significant difference (except number of eggs laid by moth) which could account for presence of same maturity genes (Lm) in both direct and reciprocal crosses. it was clear that reciprocal differences occur when the hybrids are prepared from the parental strains with different voltinism.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.822-829
• /
• 2007

A gene coding for phosphoketolase, a key enzyme of carbohydrate catabolism in heterofermentative lactic acid bacteria(LAB), was cloned from a Lactobacillus paraplantarum C7 and expressed in Escherichia coli. The gene is 2,502 bp long and codes for a 788-amino-acids polypeptide with a molecular mass of 88.7 kDa. A Shine-Dalgarno sequence(aaggag) and an inverted-repeat terminator sequence are located upstream and downstream of the phosphoketolase gene, respectively. The gene exhibits an identity of >52% with phosphoketolases of other LAB. The phosphoketolase of Lb. paraplantarum C7(LBPK) contains several highly conserved phosphoketolase signature regions and typical thiamine pyrophosphate(TPP) binding sites, as reported for other TPP-dependent enzymes. The phosphoketolase gene was fused to a glutathione S-transferase(GST::LBPK) gene for purification. The GST::LBPK fusion protein was detected in the soluble fraction of a recombinant Escherichia coli BL21. The GST::LBPK fusion protein was purified with a yield of 4.32mg/400ml by GSTrap HP affinity column chromatography and analyzed by N-terminal sequencing. LBPK was obtained by factor Xa treatment of fusion protein and the final yield was 3.78mg/400ml. LBPK was examined for its N-terminal sequence and phosphoketolase activity. The $K_M\;and\;V_{max}$ values for fructose-6-phosphate were $5.08{\pm}0.057mM(mean{\pm}SD)$ and $499.21{\pm}4.33{\mu}mol/min/mg$, respectively, and the optimum temperature and pH for the production of acetyl phosphate were $45^{\circ}C$ and 7.0, respectively.

• ALGAE
• /
• v.36 no.2
• /
• pp.137-146
• /
• 2021

Intertidal macroalgae are regularly exposed to hypo- or hypersaline conditions which are stressful. However, red algae in New Zealand are generally poorly studied in terms of salinity tolerance. Consequently, two native (Bostrychia arbuscula W. H. Harvey [Ceramiales], Champia novae-zelandiae [J. D. Hooker & Harvey] Harvey [Rhodymeniales]) and one introduced red algal taxon (Schizymenia spp. J. Agardh [Nemastomatales]) were exposed for 5 days in a controlled salt stress experiment to investigate photosynthetic activity and osmotic acclimation. The photosynthetic activity of B. arbuscula was not affected by salinity, as reflected in an almost unchanged maximum quantum yield (F_v/F_m). In contrast, the F_v/F_m of C. novae-zelandiae and Schizymenia spp. strongly decreased under hypo- and hypersaline conditions. Treatment with different salinities led to an increase of the total organic osmolyte concentrations with rising salt stress in B. arbuscula and Schizymenia spp. In C. novae-zelandiae the highest organic osmolyte concentrations were recorded at S_A 38, followed by declining amounts with further hypersaline exposure. In B. arbuscula, sorbitol was the main organic osmolyte, while the other taxa contained floridoside. The data presented indicate that all three red algal species conspicuously differ in their salt tolerance. The upper intertidal B. arbuscula exhibited a wide salinity tolerance as reflected by unaffected photosynthetic parameters and strong sorbitol accumulation under increasing salinities, and hence can be characterized as euryhaline. In contrast, the introduced Schizymenia spp. and native C. novae-zelandiae, which preferentially occur in the mid-intertidal, showed a narrower salinity tolerance. The species-specific responses reflect their respective vertical positions in the intertidal zone.