• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2016

Purpose: Mee (Madhuca longifolia) is an economically important tree growing throughout Sri Lanka. Its importance is mainly attributed to its oil with high nutritional and medicinal values. However, an inefficient extraction method limits its use. This study revealed the possibility of extracting oil from mee seeds by using a screw-type oil expeller. Methods: A popular screw-type oil expeller was used in the experiment. Extract bar clearance and speeds of the main spiral shaft were altered to increase the oil expelling efficiency of the machine. The quality of refined oil at the optimum oil yield was determined by measuring the refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity. Results: An optimum yield of 35% oil was obtained when the machine capacity was 30 kg/h and energy consumption was 0.13 kWh/kg. This optimum machine condition was observed at an extract bar clearance of 0.5 mm and a main spiral shaft speed of 90 rpm. The refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity of the oil were 1.4, 203, 59, 3.5%, 0.2%, and 0.907 g/cm3 respectively. Color of the mee oil was closer to yellow, which is revealed by the lightness value (L) of 24.93 and positive value (b) of 11.81. Conclusion: The screw-type oil expeller can be used for economically extracting mee oil on a commercial scale.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.1
• /
• pp.55-62
• /
• 1987

These experiments were conducted at the upland of Livestock Farm, Seoul National University, Suweon to determine the growth characteristics, winter-hardiness and forage yield of selected southern and northern-types of winter rye (Secale cereale L.) in comparison with the Korean native rye over two seasons, 1977-78 and 1980-8 1. During the 1977-78 season, most southern-type rye varieties except Explorer and Abruzzi headed 2 to 6 days earlier than the Korean native rye and 6 to 10 days earlier than northerntype rye varieties Rymin and Puma, while in 1980-81 southern-type rye varieties headed 5 to 7 days earlier than the Korean native rye, therefore, the Korean native rye seemed to be medium in maturity. There were no significant differences in winter-hardiness among different rye varieties with the exception of the lowest winter survivals of Wintergrazer 70, Explorer and triticale, and Gator, Explorer and Florida Black during the 1977-78 and 1980-8 1 seasons, respectively. Southern-type rye varieties tended to yield more forage than northern-type and the Korean native rye varieties when harvest was made in the later part of April. During 1977-78 season, Vita-Graze, Elbon and Athens Abruzzi rye varieties produced significantly more forage than the Korean native rye, but in 1980-81 Wrens Abruzzi rye produced significantly more forage than the Korean native rye. Based on the results of the two seasons, southern-type rye varieties,Vita-Graze, Athens Abruzzi, Elbon and Wrens Abruzzi could be recommended as a source of green forage for livestock in April in middle-northern parts of Korea.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.1
• /
• pp.27-30
• /
• 1996

This study was conducted to obtain basic information on growth characteristics and major components of three Korean endemic resource plant species, Artemisia sp., Gynostemma pentaphyllum Makino and Humulus japonicus S. et Z. , growing in different areas in Korea. Three geographical types of artemisia, namely Pangssuk, Ongjinssuk and Yakssuk which were collect in Suwon, Ongjin and Eumsong, respectively were compared in yield, and Pangssuk artemisia was higher in yield than the others. However, essential oil content was the highest in Yakssuk artemisia. Dry weight of areal parts of G. pentaphyllum was higher in the cultural method with props for tendril growth than in the conventional cultural method without props. Rutin was detected in areal parts of G. pentaphyllum. Dry weight of areal parts of H. japonicus collected at the Kyeryong mountain in Chungnam province was higher than that collected in Eumsong. A phenolic compound isoquercitrin was detected in areal parts of H. japonicus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.119-128
• /
• 2017

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods. The required time for seed emergence was for 8~ 9days in the tested direct seeding methods and there was high in seedling establishment according to wet hill-seeding with iron-coated seeds> wet hill-seeding with soil coverage>water seeding with iron-coated seeds and water seeding with pregerminated seeds as the conventional treatment. The rice plant height was taller in wet hill-seeding methods than that of water seeding with broadcasting method but there was not significant difference in terms of statistical analysis at 75day after seeding except the water seeding with pregerminated seeds. The growth of tiller number in the rice plant was highest in water seeding with iron-coated seeds. The milled rice yield was highest in water seeding with iron-coated seed being with 6.4t/ha and percentage of head rice was the highest in wet hill-seeding and water seeding with iron-coated seeds.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.2
• /
• pp.95-103
• /
• 1981

This study was conducted to evaluate the effects of application of several soil amendment materials to an alluvial sandy soil on the rice growth and yield during the 1979. The materials used were the combinations of rice straw, rice hull, silicate fertilizer, red earth and zeolite. The results obtained were summarized as follows : 1. The application of soil amendment materials considerably increased the number of tillers, plant height and dry matter of rice plant. Particularly, the zeolite treated plot resulted in much better growth in the late stage rather than in the early stage. 2. The plots treated with silicate fertilizer, rice hull and zeolite significantly increased the rice yield and so did those with red earth statistically at 5 % level. However, it was not significant with rice straw. 3. By the application of these materials, the silica content in rice plant was continuously increased untill the heading stage, the nitrogen content was high at the maximum tillering stage and the panicle initiating stage and the phosphorus content was high at panicle initiating stage, which were censidered to be the factors of yield increase. However, in the straw treated plot, the contents of nitrogen, phosphorous and potassium were high, while the silica content was low in rice plant. 4. Further, soil pH, C. E. C., content s of organic matter and silicate in soil treated with those materials were increased after experiment. compared with in the soil before experiment.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.832-838
• /
• 2016

The purpose of this study was to investigate the effect of a fresh chlorella powder on yield, quality and self-life of organic soybean tofu. After added with a fresh chlorella powder, yields, physical properties, color, shelf-life and sensory properties of the organic soybean tofu added with chlorella powder was compared to the properties of soybean tofu. The yield of soybean tofu increased with the addition of more than 1% chlorella powder. Hardness of the organic soybean tofu with chlorella significantly increased compared to that of the soybean tofu. However, Hunter's color values of L, a, and b decreased by increases in the chlorella powder concentration. Total microbial population of the soybean tofu was higher than that of the organic soybean tofu with chlorella. However, pH of chlorella tofu decreased during storage period at $4^{\circ}C$. After 7 days storage at $4^{\circ}C$, the total microbial population decreased significantly with the addition of 2% chlorella powder. The L and a value of chlorella tofu was increased. On the other hand, the b value of chlorella tofu was decreased during storage. The results revealed that a fresh chlorella powder was a useful material to improve yield, quality and storage condition of the organic soybean tofu.

• Journal of Ginseng Research
• /
• v.39 no.4
• /
• pp.398-405
• /
• 2015

Background: Ginseng has been used as a tonic for invigoration of the human body. In a previous report, we identified a novel candidate responsible for the tonic role of ginseng, designated gintonin. Gintonin induces $[Ca^{2+}]_i$ transient in animal cells via lysophosphatidic acid receptor activation. Gintonin-mediated $[Ca^{2+}]_i$ transient is linked to anti-Alzheimer's activity in transgenic Alzheimer's disease animal model. The previous method for gintonin preparation included multiple steps. The aim of this study is to develop a simple method of gintonin fraction with a high yield. Methods: We developed a brief method to obtain gintonin using ethanol and water. We extracted ginseng with fermentation ethanol and fractionated the extract with water to obtain water-soluble and water-insoluble fractions. The water-insoluble precipitate, rather than the water-soluble supernatant, induced a large $[Ca^{2+}]_i$ transient in primary astrocytes. We designated this fraction as gintonin-enriched fraction (GEF). Results: The yield of GEF was approximately 6-fold higher than that obtained in the previous gintonin preparation method. The apparent molecular weight of GEF, determined using sodium dodecyl sulfate-polyacrylamide gel electrophoresis, was equivalent to that obtained in the previous gintonin preparation method. GEF induced $[Ca^{2+}]_i$ transient in cortical astrocytes. The effective dose (ED50) was $0.3{\pm}0.09{\mu}g/mL$. GEF used the same signal transduction pathway as gintonin during $[Ca^{2+}]_i$ transient induction in mouse cortical astrocytes. Conclusion: Because GEF can be prepared through water precipitation of ginseng ethanol extract and is easily reproducible with high yield, it could be commercially utilized for the development of gintoninderived functional health food and natural medicine.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.9
• /
• pp.1296-1302
• /
• 2015

This study was conducted to examine the effects of supplementing brown seaweed by-products (BSB) in the diet of ruminants on ruminal fermentation characteristics, growth performance, endocrine response, and milk production in Holstein cows. In Experiment 1, the effects of different levels (0%, 2%, and 4% of basal diet as Control, 2% BSB, 4% BSB, respectively) of BSB were evaluated at 3, 6, 9, 12, and 24 h in vitro batch culture rumen fermentation. The pH tended to be higher for the higher level of BSB supplementation, with the pH at 12 h being significantly higher (p<0.05) than that of the control. The concentration of ammonia nitrogen was lower at 3, 9, 12, and 24 h incubation (p<0.05) compared with the control, and tended to be low at other incubation times. Volatile fatty acid concentration appeared to be minimally changed while lower values were observed with 4% BSB treatment at 24 h (p<0.05). In Experiment 2, effects of levels (0%, 2%, and 4%) of BSB on growth performance, endocrine responses and milk production were studied with Holstein dairy cows during transition. Dry matter intake, daily gain and feed efficiency were not affected by BSB supplementation. The concentration of plasma estrogen for the control, 2% BSB and 4% BSB after three months of pregnancy were 55.7, 94.1, and 72.3 pg/mL, respectively (p = 0.08). Although the differences of progesterone levels between BSB treatments and the control were minimal, the concentration in 4% BSB treatment increased to 157.7% compared with the initial level of the study. Triiodothyronine and thyroxine levels were also higher after both three months and eight months of pregnancy than the initial level at the beginning of the study. In addition, BSB treatments during one month after delivery did not affect daily milk yield and composition. In conclusion, the present results indicate that supplementation of BSB did not compromise ruminal fermentation, and animal performance at lower levels and hence may have potential to be used as a safe feed ingredient in dairy cows.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.1
• /
• pp.44-52
• /
• 1994

In order to investigate the effect of tempring treatment on the mechanical properties of ausformed martensite in Fe-30%Ni-0.35%C alloy, the hardness, yield strength and elongation were examined by tensile test. 1. The strength of deformed austenite in Fe-30%Ni-0.35%C alloy was increased due to the work hardening induced from the dislocation density increased during deformation. The strength of ausformed martensite was increased because of defects inherited from deformed austenite by martensitic transformation. 2. The ductility of ausformed martensite was shown a nearly constant values independent of deformation degrees because of the interaction of multiple factors such as increased retained austenite, formation of void and decrement of twin in ausformed martensite. 3. The strength of ausformed martensite by tempering treatment was shown a little decrement up to $340^{\circ}C$, especially showed remarkable softening resistance in higher deformation degrees. 4. Virgin martensite and ausformed martensite were shown a maximum yield strength by clustering in tempering at $100^{\circ}C$ and above $100^{\circ}C$, yield strength was very small decreased due to the decrement of solute carbon by the destruction of clustering. 5. The decomposition of retained austenite was not shown up to $450^{\circ}C$ in ausformed martensite with tempering treatment, and the matrix was rapidly softening because of the decomposition of martensite and the formation of reversed austenite with tempering above $400^{\circ}C$.