• 제목/요약/키워드: $H_2S$ removal

검색결과 779건 처리시간 0.033초

통합 하이브리드시스템을 활용한 폐가스 처리 거동 (Time-Dependent Behavior of Waste-Air Treatment Using Integrated Hybrid System)

  • 이은주;임광희
    • Korean Chemical Engineering Research
    • /
    • 제60권1호
    • /
    • pp.100-115
    • /
    • 2022
  • 교대로 운전되는 광촉매반응기 공정 및 바이오필터 공정[전통적 바이오필터(L 반응기)와 두 개의 유닛(Rup 및 Rdn)을 가지는 개선된 바이오필터(R 반응기)]으로 구성된 통합 하이브리드시스템(통합처리시스템)에서 에탄올과 황화수소를 동시 함유한 폐가스 처리를 성공적으로 수행하였다. 통합처리시스템의 운전 단계로서 HA1, HA2 및 폐가스의 공급 방향이 뒤바뀐 HA3T stage의 광촉매 공정에서 각각 55, 50 및 45%의 에탄올 제거효율과 각각 70, 60 및 37%의 황화수소 제거효율을 보였다. 특히, HA3T stage에서 통합처리시스템으로 공급되는 폐가스(feed)의 황화수소 농도가 10 ppmv에서 20 ppmv로 급증함에 따른 황화수소 부하량의 증가로 인하여 특히 황화수소 제거효율의 급격한 감소를 관찰하였다. 통합처리시스템의 HA1, HB1, HA2 및 HB2 stage 및 HA3T stage의 초반에, 개선된 바이오필터(R 반응기)의 각 유닛에 설치한 sampling 구들의 에탄올의 파과 순서 및 에탄올 처리효율의 크기 순서는, HA3T stage 후반과 HB3T stage의 경우에서 각각 거꾸로 바뀌었다. 한편 개선된 바이오필터(R 반응기)에서 황화수소의 경우는 파과 정도가 에탄올의 경우만큼 두드러지지는 않았으나 비슷한 추세가 관찰되었다.

Selective Oxidation of Hydrogen Sulfide to Elemental Sulfur with Fe/MgO Catalysts in a Slurry Reactor

  • Lee, Eun-Ku;Jung, Kwang-Deog;Joo, Oh-Shim;Shul, Yong-Gun
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권2호
    • /
    • pp.281-284
    • /
    • 2005
  • The Fe/MgO catalysts with different Fe loadings (1, 4, 6, 15 and 30 wt% Fe) were prepared by a wet impregnation with iron nitrate as precursor. All of the catalysts were characterized by BET surface analyzer, X-ray diffraction (XRD), temperature-programmed reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The maximum removal capacity of $H_2S$ was obtained with 15 wt% Fe/MgO catalyst which had the highest BET surface area among the measured catalysts. XRD of Fe/MgO catalysts showed that well dispersed Fe particles could be present on Fe/MgO with Fe loadings below 15 wt%. The crystallites of bulk $\alpha$-$Fe_2O_3$ became evident on 30 wt% Fe/MgO, which were confirmed by XRD. TPR profiles showed that the reducibility of Fe/MgO was strongly related to the loaded amounts of Fe on MgO support. Therefore, the highest removal efficiency of $H_2S$ in wet oxidation could be ascribed to a good dispersion and high reducibility of Fe/MgO catalyst. XPS studies indicated that the $H_2S$ oxidation with Fe/MgO could proceed via the redox mechanism ($Fe^{3+}\;{\leftrightarrow}\;Fe^{2+}$).

지렁이 분변토를 이용한 생물담체가 충전된 바이오필터에 의한 황화수소 제거 (Application of Earthworm Casting-derived Biofilter Media for Hydrogen Sulfide Removal)

  • 유선경;이은영
    • 대한환경공학회지
    • /
    • 제29권7호
    • /
    • pp.820-825
    • /
    • 2007
  • 지렁이 분변토는 낙엽이나 땅 속의 썩은 뿌리 등을 먹고 장 내의 효소에 의해 부숙화시켜 섭취한 먹이의 80% 이상을 그대로 배설한 질소, 인산, 칼륨 등의 함량이 매우 높고 미생물량도 $10^8$ CFU 이상이 되는 천연비료이다. 또한, 분변토의 단립 구조는 통기성 및 투수성이 매우 우수하며, 비표면적이 크고 양이온 교환용량(2.30-4.60 mg/g-soil)이 높아 탈취 능력이 있는 것으로 알려져 있다. 따라서 본 연구에서는 분변토의 특성을 유지하고 내구성을 향상시켜주기 위해 폐 polyurethane form을 binder로 하여 담체를 제조한 후, 이를 충전한 바이오필터를 대상으로 악취가스 중 황화수소의 제거 성능을 평가하였다. 본 담체는 별도의 배지를 사용하지 않고 분변토 자체에 포함된 유기, 무기물질을 이용하고, 분변토 자체에 있는 미생물을 이용하여 황화수소를 제거할 수 있었다. 황화수소 주입직후부터 lag phase없이 100%의 제거효율을 보였다. 공간속도 50 $h^{-1}$인 경우 입구농도 450 ppmv까지 출구에서 황화수소가 검출되지 않았으며, 악취가스의 입구 농도가 증가함에 따라 바이오필터의 제거효율이 감소하여 출구의 황화수소 농도가 증가하였다. 이 후 950 ppmv까지 약 93% 이상의 우수한 제거효율은 보였고, 약 61.2 g $S{\cdot}m^{-3}{\cdot}h^{-1}$의 최대제거용량을 얻을 수 있었다. 90% 이상의 제거효율을 갖는 황화수소의 최대제거용량은 SV 50 $h^{-1}$에서 300 $h^{-1}$로 증가함에 따라, 61.2, 65.9, 84.7, 89.4 g $S{\cdot}m^{-3}{\cdot}h^{-1}$로 증가하다가 SV 400 $h^{-1}$ 에서는 약 59.3 g $S{\cdot}m^{-3}{\cdot}h^{-1}$로 감소하였다. 공간속도의 증가에 따른 최대제거속도$(V_m)$와 포화상수$(K_s)$를 Michaelia-Menten식으로부터 구한 결과, 각각 66.04, 88.96, 117.35, 224.15, 227.54 g $S{\cdot}m^{-3}{\cdot}h^{-1}$로 비례적으로 증가하였으며, 반면 포화상수는 79.97, 64.95, 65.37, 127.72, 157.43 ppmv으로 감소한 후 다시 증가하는 경향을 보였다.

Comparative study of analgesia with bupivacaine 0.25% versus 0.5% for third molar removal under general anesthesia

  • Dhanrajani, Parmanand;Chung, Patrick
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제16권2호
    • /
    • pp.117-122
    • /
    • 2016
  • Background: The aim of this study was to compare the effectiveness and duration of action of two concentrations of bupivacaine with adrenaline for postoperative pain in patients undergoing surgical removal of four third molars under general anesthesia. Methods: Sixty patients undergoing surgical removal of four wisdom teeth received bupivacaine 0.5% (n = 30) or 0.25% (n = 30). The severity of pain in the immediate recovery period and at 2 and 24 h after surgery was recorded using the visual analogue scale. Differences were assessed by box and whisper plot and the Student's t-test. Results: The analgesic effects of the 0.25% and 0.5% doses were significantly different (P = 0.022) at 30 min after surgery but not after 2 and 24 h. The difference of mean of 0.25% and 0.5% was much higher after 0.5 h but less after 2 and 24 h. Conclusions: Bupivacaine 0.5% was statistically better for pain control during the immediate postoperative period, but there was no significant difference in pain control between the two dose strengths at 2 and 24 h after surgery.

생물살수여과법을 이용한 공기중 VOC 및 H2S 제거 (Removal of VOCs and H2S from Waste Gas with Biotrickling Filter)

  • 김경옥;김용제;원양수
    • 공업화학
    • /
    • 제19권5호
    • /
    • pp.519-525
    • /
    • 2008
  • 생물살수여과법을 이용하여 대표적인 휘발성 유기물질인 toluene, styrene과 악취물질인 $H_2S$를 운전조건에 따른 제거 특성에 대해 실험적 고찰을 중심으로 진행하였다. $H_2S$ 제거 특성 고찰을 위한 autotroph과 mixotroph 조건하에서는 $H_2S$ 부하율이 낮은 조건($10g/m^3{\cdot}hr$)에서는 두 조건에서 모두 제거율이 99% 이상을 나타냈다. 부하율이 증가하면서 제거율이 감소하였으며, mixotroph 조건하에서 제거율이 다소 높았다. 방향족 휘발성 유기화합물질인 toluene과 styrene 농도변화에 따른 부하율과 제거용량 관계에서 toluene 부하율이 $40g/m^3{\cdot}hr$ 이하에서는 농도에 관계없이 제거율이 거의 99%를 나타내나 부하율이 증가함에 따라서 제거율은 감소하며 부하율이 증가해도 제거용량이 더 이상 증가하지 않는 최고제거용량을 나타내고 있으며 toluene 농도가 0.2, 0.5과 $1.0g/m^3$일 때 최고제거용량은 각각 40, 45, $60g/m^3{\cdot}hr$으로 나타내고 있다. toluene으로 순응된 살수여과탑에 styrene을 주입하여 순응시킨 후 styrene 제거 실험결과는 toluene 실험결과와 유사한 경향을 나타내었으나 전체적으로 제거효율이 낮게 나타났다. 순환살수액 유량 등의 적정 운전조건은 탑내 미생물의 활성도, 반응기 물리/화학적 특성에 따라 물질전달, 탑내 주입된 공기의 분배, 살수액 통과 경로, 미생물 분포도, 공극율 등에 따라 제거효율이 달라지므로 이를 고려한 적정 운전조건이 결정되어야 한다.

펜톤 산화반응에 의한 염색폐수처리 연구 (Treatment Study of Textile Wastewater by Fenton's Oxidation)

  • 박영규
    • 환경위생공학
    • /
    • 제15권4호
    • /
    • pp.20-25
    • /
    • 2000
  • The wastewater treatment for the purpose of water-recycling was performed using Fenton's & ozone's methods. These methods were used to increase the treatment efficiency of textile wastewater and to search for the optimal operating conditions. The optimal conditions by Fenton process were determined so that input amounts of $FeSO_4{\cdot}7H_2O$ and $H_2O_2$ were $7.2mM/{\;}{\ell}$ and $49.0m/{\;}{\ell}$ respectively, treatment by ozone process had 92% removal efficiency at ozone concentration of 9.73g/min and $130mM/{\;}{\ell}$ of $H_2O_2$.

  • PDF

고온호기산화법으로 처리된 양돈분뇨 배출액의 무취화 관리방안에 관한 기초 연구 (Basic Studies on Deodorization Management of the Efflux From Swine Slurry Treated by the Thermophilic Aerobic Oxidation(TAO) Reactor)

  • 이명규;허재숙;태민호;정진영;권오중
    • 한국축산시설환경학회지
    • /
    • 제5권2호
    • /
    • pp.123-132
    • /
    • 1999
  • This study was carried out to find deodorization management method of the efflux from swine slurry treated by thermophilic aerobic oxidation reactor. Three kinds of deodorization methods in Lab-scale reactors, were used in this experiment; No treatment, air injection treatment(50$m\ell$ air/min. $\ell$) and inoculumn of photrophic bacteria treatement(108 cell(Most probable number, MPN)/$m\ell$). The concentration of volatile fatty acids(VFAs), hydrogen sulfide(H2S), and ammonia(NH3) were analyzed during the treatment period(50 days). The major results obtained as follows. 1. Air injection method to efflux showed very high removal effect on malodorants such as VFAs, hydrogen sulfide(H2B). But ammonia(NH3) was emitted to much. 2. PTB inoculum method was also effective in removal of malodorants, VFAs, Hydrogen sulfide(H2S), when it was applied to the efflux. 3. We found that the concentrations of malodorants, VFAs, H2S, NH3 had some relatinships with the pH, ORP, BOD in the efflux.

The Utilization of Waste Seashell for High Temperature Desulfurization

  • Kim, Young-Sik;Hong, Sung-Chul
    • 한국환경보건학회지
    • /
    • 제36권2호
    • /
    • pp.136-140
    • /
    • 2010
  • The integrated gasification combined cycle (IGCC) is one of the most promising proposed processes for advanced electric power generation that is likely to replace conventional coal combustion. This emerging technology will not only improve considerably the thermal efficiency but also reduce or eliminate the environmentally adverse effects normally associated with coal combustion. The IGCC process gasifies coal under reducing conditions with essentially all the sulfur existing in the form of hydrogen sulfide ($H_2S$) in the product fuel gas. The need to remove $H_2S$ from coal derived fuel gases is a significant concern which stems from stringent government regulations and also, from a technical point of view and a need to protect turbines from corrosion. The waste seashells were used for the removal of hydrogen sulfide from a hot gas stream. The sulphidation of waste seashells with $H_2S$ was studied in a thermogravimetric analyzer at temperature between $600^{\circ}C$ and $800^{\circ}C$. The desulfurization performance of the waste seashell sorbents was experimentally tested in a fixed bed reactor system. Sulfidation experiments performed under reaction conditions similar to those at the exit of a coal gasifier showed that preparation procedure and technique, the type and the amount of seashell, and the size of the seashell affects the $H_2S$ removal capacity of the sorbents. The pore structure of fresh and sulfided seashell sorbents was analyzed using mercury porosimetry, nitrogen adsorption, and scanning electronmicroscopy.

Reactive Black Removal by using Electrocoagulation Techniques: An Response Surface Methodology Optimization and Genetic Algorithm Modelling Approach

  • Manikandan S.;Saraswathi R.
    • Journal of Electrochemical Science and Technology
    • /
    • 제14권2호
    • /
    • pp.174-183
    • /
    • 2023
  • The dye wastewater discharge from the textile industries mainly affects the aquatic environment. Hence, the treatment of this wastewater is essential for a pollutant-free environment. The purpose of this research is to optimize the dye removal efficiency for process influencing independent variables such as pH, electrolysis time (ET), and current density (CD) by using Box-Behnken design (BBD) optimization and Genetic Algorithm (GA) modelling. The electrocoagulation treatment technique was used to treat the synthetically prepared Reactive Black dye solution under batch mode potentiometric operations. The percentage of error for the BBD optimization was significantly greater than for the GA modelling results. The optimum factors determined by GA modelling were CD-59.11 mA/cm2, ET-24.17 minutes, and pH-8.4. At this moment, the experimental and predicted dye removal efficiencies were found to be 96.25% and 98.26%, respectively. The most and least predominant factors found by the beta coefficient were ET and pH respectively. The outcome of this research shows GA modeling is a better tool for predicting dye removal efficiencies as well as process influencing factors.

Acidithiobacillus ferrooxidans를 고정화한 생물반응기와 흡수탑을 이용한 고농도 황화수소 제거 (Removal of High Strength Hydrogen Sulfide Gas using a Bioreactor Immobilized with Acidithiobacillus ferrooxidans and a Chemical Absorption Scrubber)

  • 류희욱;이내윤;조경숙
    • 한국미생물·생명공학회지
    • /
    • 제32권4호
    • /
    • pp.328-333
    • /
    • 2004
  • 고농도의 황화수소 가스를 제거하기 위하여 철촉매인 $Fe^{3+}$ 을 생산할 수 있는 철산화 세균 A. ferrooxidans를 다공성 세라믹 담체에 고정화한 생물반응기와 황화수소가 $Fe^{3+}$ 와 화학반응에 의해 elemental sulfur로 제거되는 흡수탑 반응기로 구성된 2단계 생물학적 탈황공정을 연구하였다. 생물반응기는 4회 이상의 반복 회분식 배양을 통해 안정화 되었고, 정상상태에서의 평균 철산화 속도는 $0.89kg{\cdot}m^{-3}{\cdot}h^{-1}$ 이었다. 2단계 생물 탈황공정은 약 54일 동안 장기간 성공적으로 조업이 가능하였다. 흡수탑 반응기에서는 공간속도를 70 $h^{-1}$ 의 조건하에서 37.000 ppm의 고농도 $H_{2}S$ 제거 임계 부하량은 3.3 kg $S{\cdot}m^{-3}{\cdot}h^{-1}$ 로 우수하였다. 장기간 조업하는 동안 고정화 세포의 농도는 일정하게 유지되었다.