• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.162-167
• /
• 2012

The removal of orthophosphate ions from aqueous solutions by the anion exchange resin in the form of $Cl^-$ ion was investigated to elucidate the ion exchange mechanism which depends on the forms of orhthophoshate ions. In addition, the effects of alkalinity and other common anions were studied. The results showed that the orhthophosphate ions with the oxidation state of 2 and 3 ($HPO{_4}^{2-}$ and $PO{_4}^{3-}$) were effectively removed by the anion exchange resin, whereas the part of the $H_2PO_4{^-}$ ion passed through the ion exchange column. This suggested that the affinity of $H_2PO_4{^-}$ to the ion exchange resin was comparable with that of $Cl^-$ ion. In all cases, the effluent pHs have shown to be much lower than the calculated values, indicating that more $Cl^-$ ions than the orthophosphate equivalents in the influent were eluded. As the alkalinity increases, the decrease in pH was minimized. When the alkalinity was 100 mg/L ($CaCO_3$) or greater, 100 mg/L orthophosphate ions including $H_2PO_4{^-}$ were completely removed. The common anions such as $SO{_4}^{2-}$ and $NO_3{^-}$ were also removed by the anion exchange resin, and thus decreased the ion exchange capacity for the removal of orthophosphate.

• Journal of Environmental Science International
• /
• v.32 no.10
• /
• pp.731-739
• /
• 2023

In this study, lab-scale phosphorus coagulation/precipitation experiments were performed using three types of polyaluminum chloride (PAC) with different Al contents (10%, 12%, and 17%). The PO₄-P removal efficiencies at various operating conditions, such as initial PO₄-P concentration, initial pH, and Al/P molar ratio, were evaluated, and correlations among the operating factors affecting phosphorus coagulation/precipitation with PAC were derived to optimize the process efficiency. When the initial PO₄-P concentration was 0.065 and 0.161 mmol P/L under an initial pH of 8-10, the optimal PAC dose was 0.126-0.378 and 0.189-0.667 mmol Al/L, respectively. Under these conditions, the Al/P molar ratio was 2.16-6.18 and 1.28-4.30, respectively, and the PO₄-P removal efficiency was in the range of 40.2-92.5%. When the Al/P molar ratio was 2 or less under an initial pH condition of 6-8, the PO₄-P removal efficiency was approximately ≤40% owing to insufficient Al³⁺ ions. However, when the Al/P molar ratio is 3-5, the PO₄-P removal efficiency improved to approximately 80-90%. Thus, the optimal Al/P molar ratio to achieve a PO₄-P removal efficiency of over 90% was determined to be approximately 4 in the PO₄-P coagulation/precipitation process using PAC.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.30-41
• /
• 1997

A purpose of this research is to prove unknown relation -ship between finish bath pH and crosslinking. In pursuit of these goals, we have treated 100% cotton broad cloth with PTCA and BTCA at different pH values. They were used with H$_{3}$PO$_{4}$, NaH$_{2}$PO$_{2}$, NaH$_{2}$PO$_{4}$, Na$_{2}$HPO$_{4}$, Na$_{3}$PO$_{4}$, catalysts to produce nonformaldehyde fabrics finishes. Treatments were applied to all cotton fabrics using a parletry-cure process. For the fully understood on the relationship of finish bath pH effect and cotton cellulose esterification, the relative concentrations of chemical species were calculated from ionization constants. The effect of pH on the cotton cellulose ester was investigated using Fourier transform infrared spectra, the surface area measurement by BET method and wrinkle recovery analysis. Results of differential FT-IR spectra and their relative concentration analysis were compared with those of catalyst treated controls. FT-IR and wrinkle recovery data indicated that the esterfication by polycarboxylic acids is pridependent. A similar phenomenon also occurred when a phosphate or hypophosphite was used. Therefore, it is necessary to choose the optimum pH range of a finishing bath in order to achieve the most effective esterification.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.145-151
• /
• 1996

The effectiveness of physiological or chemical acid - alkali solution was investigated as the method to control pH value of nutrient solution in hydroponics dynamically. Lettuces were cultivated using NH$_4$H$_2$PO$_4$ as physiological acid and NaNO$_3$ as physiological alkali or H$_2$SO$_4$ as chemical acid in dynamic control system. The pH of nutrient solution was controlled satisfactorily in the range of pH 5.5-6.5, regardless of treatments. Chemical acid changed pH of solution faster than chemical acid when supplied to the nutrient solution. Any of them did not show any harmful symptom. It is recommended that chemical acid is preferred during the growing stage and physiological acid like as NH$_4$H$_2$PO$_4$ is preferred from several days before harvest stage.

• Korean Journal of Materials Research
• /
• v.12 no.9
• /
• pp.761-766
• /
• 2002

Fine $LaPO_4$:Tb phosphor particles with spherical shape were prepared by spray pyrolysis. The influence of the precursor type of phosphorous such as ($NH_4$)$_2$$HPO_4$, $NH_4$$H_2$$PO_4$, ($NH_4$)$_3$$PO_4$ and $H_3$$PO_4$ on the morphology and brightness of particles was investigated. As-prepared particles by spray pyrolysis had spherical shape when ($NH_4$)$_2$ $HPO_4$ and $NH_4$$H_2$$PO_4$ were used as the precursor of phosphorous. The precursor type of phosphorous affected the photoluminescence intensity of $LaPO_4$:Tb phosphor particles, but not significant. With changing the content of activator(Tb) and excess of phosphorous, the optimal composition giving the highest photoluminescence intensity was found. The spherical morphology of prepared $LaPO_4$:Tb particles was completely maintained even after the posttreatment up to $1050^{\circ}C$. When the posttreatment temperature was over $1100^{\circ}C$, the particles did not have the spherical shape anymore. However, the highest photoluminescence intensity of prepared $LaPO_4$:Tb particles was obtained at $1050^{\circ}C$. The photoluminescence characteristics of prepared $_LaPO4$:Tb under the vacuum ultraviolet(VUV) illumination was comparable with that of the commercial $Zn_2$$V_4$:Mn and (La,Ce)PO$_4$:Tb phosphor particles. At the optimal condition, the decay time of prepared spherical $LaPO_4$:Tb phosphor particles was about 6.8ms.

• Korean Journal of Microbiology
• /
• v.39 no.1
• /
• pp.51-55
• /
• 2003

To develop environment-friendly biofertilizer solubilizing insoluble phosphates, a bacterium possessing a high ability to solubilize $Ca_{3}(PO_{4})_{2}$) was isolated from the rhizosphere of peas. On the basis of its morphological, cultural, physiological characteristics, and Vitek analysis, this bacterium was identified as Pantoea agglomerans. The optimal medium composition and cultural conditions for the solubilization of insoluble phosphate by P. agglomerans R-38 were 3% of glucose.0.1% of TEX>$NH_{4}NO_{3}$, 0.02% of $MgSO_{4}\cdot\7H_{2}O$, and 0.06% of $CaCl_{2}\cdot\2H_{2}O$ along with initial pH 7.5 at $30^{\circ}C$. The highest soluble phosphate production under optimum condition was 898 mg/L after 5 days of cultivation. The solubilization of insoluble phosphate was associated with a drop in the pH of the culture medium. The strain produced soluble phosphate to the culture broth with the concentrations of 698 mg/L against CaHPO$_4$, 912 mg/L against hydroxyapatite, 28 mg/L against $FePO_{4}\cdot\4H_{2}O$, and 19 mg/L against $AIPO_{4}$, respectively.

• Journal of Environmental Science International
• /
• v.8 no.2
• /
• pp.227-231
• /
• 1999

This study was conducted to investigate the removal characteristics of $PO_4^{3-}-P$ contained in livestock wastewater using waste concrete. With small particle size, increased dosage and temperature of water, $PO_4^{3-}-P$ was well removed by waste concrete.$PO_4^{3-}-P$ was removed by adsorption reaction in low pH of the primary phase, but the crystallization reaction predominated for increasing pH with passed time. As a result of adapting the adsorption isotherm equation, $PO_4^{3-}-P$ removal was more affected by the crystallization reaction than the adsorption reaction. In the SEM micrograph, there was no evident change on the waste concreter surface. Particle size was plate-phase before reaction but appeared a dense form to progress in the crystallization reaction.

• Journal of Plant Biotechnology
• /
• v.44 no.4
• /
• pp.448-453
• /
• 2017

This study was carried out to find culture materials (explant parts) and medium components (medium type, sucrose and $NaH_2PO_4$ concentration) for in vitro propagation of Osmunda cinnamomea var. forkiensis sporophyte. The results of study: chopped segments of leaf blades, stipes, rhizomes and roots were cultured on a 1/2MS medium supplemented with 0.1% activated charcoal. Among these explant types, only the rhizome segments produced young sporophyte, regenerating vigorously on a 1/8MS medium. Adjusting the sucrose concentration to 2% and supplement to $50mg{\cdot}L^{-1}\;NaH_2PO_4$ in the 1/8MS medium proved to be more efficient for plant regeneration. Consequently, the addition of 0.1% activated charcoal to a modified 1/8MS medium (2% sucrose, $50mg{\cdot}L^{-1}\;NaH_2PO_4$, pH 5.8 and 0.8% agar) yielded the highest sporophyte regeneration.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.9
• /
• pp.879-886
• /
• 2010

This study investigated the removal characteristics of highly concentrated $NH_4$-N and $PO_4$-P by struvite crystallization using converter slag as a seed crystal. The optimal pH range for removal and recovery of $NH_4$-N and $PO_4$-P by struvite crystallization was measured to be 8.0~8.75, in which total removal efficiencies for $NH_4$-N and $PO_4$-P by struvite precipitation and crystallization were 34.3~61.0% and 91.0~96.2%, respectively. The maximum removal efficiencies for $NH_4$-N and $PO_4$-P by struvite crystallization were 29.4% at pH 8.5 and 65.1% at pH 8.0, respectively. The removal efficiency of $NH_4$-N by struvite crystallization decreased with increasing calcium ion concentration. The analysis results of SEM, EDS and XRD exhibited that $NH_4$-N and $PO_4$-P in meta-stable region of struvite crystallization could be eliminated through formation of magnesium ammonia phosphate (MAP) and hydroxyapatite (HAp) on seed crystals by struvite precipitation and crystallization.

• Journal of the Korean Magnetic Resonance Society
• /
• v.14 no.2
• /
• pp.134-143
• /
• 2010

We studied the hydrogen-bonded $TlH_2PO_4$ (TDP) ferroelectrics treated with the proton-beam bombardment. The TDP material was irradiated with 1-MeV proton beam at a dose of $10^{15}/cm^2$. In order to analyze the hydrogen environment in TDP, we carried out the $^1H$ high resolution nuclear magnetic resonance (NMR) - i.e., Combined Rotation And Multiple Pulse Spectroscopy (CRAMPS) measurement. The isotropic chemical shift of hydrogen indicates its displacive property is related to the $PO_4$ lattice deformation which occurs throughout the antiferroelectric-, the ferroelastic- and the paraelastic-phase transitions. The temperature dependence of $\sigma_{iso}$ reveals the electronic charge redistribution is induced by the proton-beam irradiation and the elastic property.