• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.593-598
• /
• 2010

The optimum condition for fluoride removal, water content reduction, and $CaF_2$ purity was determined in treating semiconductor waste water in which ammonia nitrogen, phosphorus, and fluoride are existed simultaneously using a fluidized bed reactor. Effects of pH, seed dosage, and recirculation of treated water were investigated through lab-scale experiments. Considering fluoride removal, sludge purity, and water content, that pH 5 and seed dose of 150 g were found to be optimum. Correspondingly, removal of fluoride and phosphate (${PO_4}^{3-}$-P) was 94.24% and 8.97%, respectively, with water content ratio of 12.94%. Increase in an amount of seed dosage not only enhance fluoride removal efficiency, but also buffer fluoride removal-reducing effect due to the variation of recirculation ratio of treated water and pH.

• Journal of Environmental Science International
• /
• v.21 no.9
• /
• pp.1079-1085
• /
• 2012

Ground seawater quality was investigated, and the algal growth potential (AGP) tests were performed along the Tongyeong coast to examine the inflow of materials, which is needed for the red tide species Cochlodinium polykrikoides to grow. The study was conducted to determine the mechanism for C. polykrikoidesred tides. Water temperature, salinity, pH, and dissolved oxygen (DO) ranged from 16.05 to $20.74^{\circ}C$, 18.20 to 32.11 psu, 6.00 to 7.61, and 3.41 to 7.91 mg/L (41.4-96.1%), respectively. No seasonal variation was observed in water temperature. The salinity, pH, and DO saturations at most stations were lower than those of coastal seawater at Tongyeong. The ${NH_4}^+$-N, ${NO_{2+3}}^-$-N, ${PO_4}^{3-}$-P concentrations ranged from 0.43 to 16.00 ${\mu}M$, 1.50 to 132.38 ${\mu}M$, and 1.30 to 6.29 ${\mu}M$, respectively; the values at some stations were much higher than observed in Tongyeong coast seawater. Using seawater from station B, C. polykrikoides grew consistently, with a high growth rate, similar to the red tide in nature. This seawater appeared to contain materials needed by C. polykrikoides to grow. Therefore, C. polykrikoides red tides seem to occur wherever the ground sea water contains materials that are needed for its growth.

• Membrane Journal
• /
• v.29 no.1
• /
• pp.30-36
• /
• 2019

In this study, we reported a solid-state supercapacitor consisting of titanium nitride (TiN) nanofiber and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT-PSS) conducting polymer electrode and poly(vinyl alcohol) (PVA)-based polymer electrolyte membrane. The TiN nanofiber was selected as electrode materials due to high electron conductivity and 2-dimensional structure which is beneficial for scaffold effect. PEDOT-PSS is suitable for organic/inorganic composites due to good redox reaction with hydrogen ions in electrolyte and good dispersion in solution. By synergetic effect of TiN nanofiber and PEDOT-PSS, the PEDOT-PSS/TiN electrode showed higher surface area than the flat Ti foil substrate. The PVA-based polymer electrolyte membrane could prevent leakage and explosion problem of conventional liquid electrolyte and possess high specific capacitance due to the fast ion diffusion of small $H^+$ ions. The specific capacitance of PEDOT-PSS/TiN supercapacitor reached 75 F/g, which was much higher than that of conventional carbon-based supercapacitors.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2001.06a
• /
• pp.67-86
• /
• 2001

A strain producing strongly fibrinolytic enzyme was isolated from soil and was identified to be Bacillus subtilis by biochemical and physiological characterization. The optimal culture conditions for the production of fibrinolytic enzyme was determined to be 1.0% tryptone, 1.5% soluble starch, 0.5% Peptone, 0.5% NaCl, $(NH_{4})_{3}PO_4.3H_{2}O, and MgSO_{4}.7H_{2}O.$ Initial pH and temperature were pH 8.0 and $30^{\circ}C$ , respectively, The highest enzyme production was observed at 30 hours of cultivation at $30^{\circ}C$ The fibrinolytic enzyme was purified to homogeneity by DEAE Sephadex A-50 ion exchange column chromatography, 70% ammonium sulfate precipitation, Sephadex G-200 and G-75 gel filtration column chromatography. The molecular weight of the purified enzyme was 28,000 as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. A gene encoding the fibrinolytic enzyme was cloned into a plasmid vector pBluescript, transforming E.coli XL-1 Blue. The clone was able to degrade fibrin, This indicated that the gene could encode a fibrinolytic enzyme. The nucleotide sequence of the 2.7 kb insert was determined in both direction. One open reading frame composed of 1023 nucleotides was found to be a potential protein coding region. There was the putative Shine-Dalgano sequence and TATA box upstream of the open reading frame. The homology search data in the genome database showed that both the 2.7 kb insert and 1 kb open reading frame carried no significance in the nucleotide sequence of known fibrinolytic enzyme from Bacillus serovars. The recombinant cell harboring the novel gene involved in fibrinolysis was subjected to protein purification. The molecular mass of the purified fibrinolytic enzyme was determined to be 31864 Dalton, which was highly in accordance with the molecular mass(33 kDa) of the fibrinolytic gene deduced from the insert. The fibrinolytic enzyme was Purified 50.5 folds to homogeneity in overall yield of 10.7% by DEAE Sephadex A-50 ion exchange, 85% ammonium sulfate precipitation, Sephadex G-50, Superdex 75 HR FPLC gel filtration. In conclusion, a novel fibrinolytic gene from Bacillus subtilis was identified and characterized by cloning a genomic library of Bacillus subtilis into pBleuscript. For the soybean fermented by this strain, it is found that there increased assistant protein about 20% compared to the soybean not fermented and increased about 30% according to amino acid analysis and, in particular, essential amino acid increased about 40%. When keeping this fermented soybean powder at room temperature for about 70days, it showed very high stability maintaining almost perfect activity and, therefore, it gave us great suggestion its possibility of development as a new functional food.

• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.33-41
• /
• 1984

This study was conducted to examine the physiology of pine mushroom mycelia cultured with various media for artificial culture of pine mushroom. The results obtained were as follows: 1) Among the various media, the medium composed of honey, boiled pine mushroom and soil extract fluid, fibrous root extract fluid, dry yeast, $KH_2PO_4$ inositol, folic acid, and biotin was the best for the growth of pine mushroom mycelium. 2) The optimum temperature for germinating pine mushroom spore and for culturing pine mushroom mycelium, was $24^{\circ}C$ and the optimum pH was 4.5. 3) There was no significant difference in growth between the mycelium separated from the tissue of pine mushroom sporophore and that separated from the spore. 4) No noticeable effect was found on the growth if such salts as $ZnSO_4$, $MnSO_4$, $MgSO_4$, $CaCl_2$ and ferric citrate were added to the Hamada's medium. 5) The addition of fibrous root extract promoted the growth of pine mushroom mycelium. 6) As a carbon source of artificial media, honey was more effective than glucose. 7) The culture infiltration of Mortierlla growing often in Fairy Ring was good for the growth of mycelium compared with the control. 8) The addition of fibrous root extract, inositol, biotin, and folic acid to artificial culture media was greatly effective in growth. When the temperature was lowered $19^{\circ}C$ after mycelium has appeared, the formation of primordium was observed.

• Korean Journal of Metals and Materials
• /
• v.50 no.2
• /
• pp.164-170
• /
• 2012

Nanotubular structure formation on the Ti-6Al-4V and Ti-Ta alloy surfaces by electrochemical methods has been studied using the anodizing method. A nanotube layer was formed on Ti alloys in 1.0 M $H_3PO_4$ electrolyte with small additions of $F^-$ ions. The nanotube nucleation and growth of the ${\alpha}$-phase and ${\beta}$-phase appeared differently, and showed different morphology for Cp-Ti, Ti-6Al-4V and Ti-Ta alloys. In the ${\alpha}$-phase of Cp-Ti and martensite ${\alpha}^{\prime}$ and in the ${\alpha}^{{\prime}{\prime}}$ and ${\beta}$-phase of the Ti-Ta alloy, the nanotube showed a clearly highly ordered $TiO_2$ layer. In the case of the Ti-Ta alloy, the pore size of the nanotube was smaller than that of the Cp-Ti due to the ${\beta}$-stabilizing Ta element. In the case of the Ti-6Al-4V alloy, the ${\alpha}$-phase showed a stable porous structure; the ${\beta}$-phase was dissolved entirely. The nanotube with two-size scale and high order showed itself on Ti-Ta alloys with increasing Ta content.

• The Korean Journal of Mycology
• /
• v.25 no.4 s.83
• /
• pp.257-267
• /
• 1997

Fruit bodies similar to the Phellinus sp. residing on the mulberry were collected at Yang-yang in Kang-won-do province and one strain of Phellinus sp. was isolated from the fruit bodies. For mass production of the isolated mycelia in a submerged culture, the culture conditions, medium composition, and the effect of various culture systems on the mycelial growth, were investigated. The morphological characteristics of the fruit body were as follows: covered with blackish to black and rough, lower surface with yellowish-brown to dull-brown and smooth, 5-7 cm thick and hard woody. Also, the pure cultured mycelia showed yellowish-brown color, capability of purplish-brown pigment production on the PDA plate media, no-formation of clamp-connection, much binding branch, and enzyme activities such as laccase, tyrosinase and peroxidase. Therefore, pure cultured strain was identified to be Phellinus sp. In the flask culture, the optimum culture conditions for the mycelial production were obtained after cultivation of 8 days at inoculum level of 5%(v/v), media volume of 70 mL, 150 rpm, initial pH 6, and temperature of $30^{\circ}C$. Optimum medium composition from the response surface analysis were determined to be glucose 12.12 g/L, sucrose 12.12 g/L, yeast extract 11.15 g/L, malt extract 11.15 g/L, $KH_2PO_4$ 0.855 g/L and $CaCl_2$ 0.855 g/L. The production of the mycelia after 4 and 8 days of cultivation was 1.95 and 9.89 g/L, respectively. The maximum specific growth rate and productivity were $0.020\;hr^{-1}$ and 1.25 g/L/day, respectively. Among the three different culture systems for the growth of mycelia, the maximum mycelial dry weight of 7.5 g/L was obtained after cultivation of 4 days in the air-lift fermentor under aeration rate of 2.5 vvm. The maximum specific growth rate and productivity were $0.033\;hr^{-1}$ and 1.9 g/L/day, respectively, which were about 1.7 and 4.2 times higher than those of flask culture.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.291-296
• /
• 2009

This study was conducted to compare the storability of 6 chicory cultivars for producing chicon; 'Vintor', 'Focus', 'Metafora', 'Kibora', 'Nobus', and 'Redoria Red' grown in 2 regions: Chuncheon (plain region) and Pyeongchang (high land region). Chicons were produced from chicory roots that grown for 120days and then stored for over 120days at $2^{\circ}C$ and 90% of RH conditions. To produce chicon, chicory root was forced at $18^{\circ}C$ for 22days with suppling the nutrient solution ($KNO_30.54g{\cdot}L^{-1}$, $Ca(NO_3)_2\;1.02g{\cdot}L^{-1}$, $MgSO_4\;0.36g{\cdot}L^{-1}$, $KH_2PO_4\;0.21g{\cdot}L^{-1}$, $K_2SO_4\;0.10g{\cdot}L^{-1}$, pH 7.0). Chicons produced from 6 different chicory cultivars packed with $25{\mu}m$ ceramic film and stored for 25days at $8^{\circ}C$. The fresh weight of chicon in MAP was maintained to 99.5% of pre-storage weight. The fresh weight of 'Redoria Red' was lowest in all cultivars, and that of Chuncheon region cultivated treatment was lower than Pyeongchang treatment. The $CO_2$ and $O_2$ concentration in chicon MAP were 2% and $10{\sim}17%$. There were not significantly different among cultivars and between regions, although 'Redoria Red' cultivar showed highest $CO_2$ and lowest $O_2$ concentrations. The ethylene concentration in chicon MAP was $1.0{\mu}{\iota}{\cdot}{\iota}^{-1}$ and also didn't show any significant difference among all treatments. Chicon detoriorated visual quality with appearing russet spotting that result from ethylene gas. The visual quality of 'Redoria Red' cultivar decreased faster than the other cultivars. 'Metafora', 'Focus', and 'Kibora' maintained higher firmness of their leaf than the others, and the firmness was higher grown in Pyeongchang region cultivated treatments than in Chuncheon region.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.91-100
• /
• 1981

As a primary study for SCP production from soybean curd waste water, selection of yeast and optimum cultivation condition of selected yeast on soybean curd waste water were investigated. Eighteen strains of the genus Candida and Saccharamyces were tested to compare their abilities to grow on soybean curd waste water. Candida utilis YUFE 1508 and Candida guilliermondii KFCC 35120 grew most successfully. Optimum pH and optimum temperature of the basal medium for growth of the two strains were $6.0{\sim}6.5$ and $25^{\circ}C$, respectively. The optimum culture medium of the two yeasts was soybean curd waste water supplemented with molasses 2.5% (as total sugar), ammonium acetate 0.1-0.3% (as nitrogen), $KH_2PO_4$ 0.1-0.2% (as phosphorus), and $K_2HPO_4$ 0.05% (as phosphorus). But yeast growth was not affected by metal salts. Under the optimum cultivation condition, the maximum cell weights of Candida utilis YUFE 1508 and Candida guillfermondii KFCC 35120 were 1.313g and 1.322g/100ml of culture broth respectively after 48 hr of cultivation. The cell yields of Candida utilis YUFE 1508 and Candida guilliermondii KFCC 35120 were 68.4% and 74.2%, respectively, based on utilized sugar. On the other hand, crude protein of dry yeast produced by Candida utilis YUFE 1508 and Candida guilliermondii KFCC 35120 under optimum condition was 54.0% and 56.8%, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.4
• /
• pp.438-445
• /
• 2010

Soils in continuous monoculture cropping system generally have a number of physical and chemical problems. Thus, we studied to investigate selected soil properties in continuous watermelon cropping plots with applications of different soil management practices: 1) conventional farming practice (CFP), 2) chemical fertilizer management practice (FMP), the FMP with different amounts, 0.5, 1.0, and 1.5 t $ha^{-1}$, of oyster shell meal application (FMP-OS 0.5, 1.0, and 1.5 t $ha^{-1}$), and 3) the FMP with different amounts, 2.0, 3.0, and 4.0 t $ha^{-1}$, of peat application (FMP-PT 2.0, 3.0, and 4.0 t $ha^{-1}$) and also to evaluate watermelon quality. Soil pH slightly increased only in the FMP-OS 1.5 t $ha^{-1}$ plot, while it was not changed or decreased a little in other plots. The contents of soil organic matter (SOM) expectedly increased in the FMP-PT plots, whereas it markedly decreased in the FMP-OS plots. The concentrations of exchangeable cations, $Ca^{2+}$, $Mg^{2+}$, and $K^+$, in soils were mostly dropped down in most of the FMP and FMP-PT plots. Otherwise, the exchangeable $Ca^{2+}$ concentration increased a bit in the FMP-OS plots. Also, the concentrations of water-soluble anions, $NO_3^-$, $Cl^-$, ${SO_4}^{2-}$, and ${PO_4}^{3-}$, in soils mostly declined in all the plots applied with the different management practices during the study years. Due to the cation and anion decreases, the electrical conductivity (EC) values in the soils were greatly reduced in the plots. Thus, the soil management practices applied, especially oyster shell meal and peat treatments, might be useful to control soil conditions. However, watermelon quality, such as sugar content and fruit weight, would not be associated with the soil management practices applied.