• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.292-297
• /
• 1999

This study was performed to estimate the possibility of use of plant materials as catalytic agents fur the decontamination of waste waters contaminated with organic pollutants by using 2,4-dichlorophenol(2,4-DCP) as a model pollutant. Plant materials containing high peroxidase activity were selected as catalysts for the removal of 2,4-DCP. Peroxidase activity, which plant materials were containing, was measured, and the greatest peroxidase activity was observed in shepherd's purse, followed by turnip, sweet potato, Chinese cabbage and white radish. The peroxidase activity in shepherd's purse was four times higher than that of horseradish purchased in U.S.A. Using shepherd' s purse and turnip, it was investigated the effect of various factors on the decontamination of 2,4-DCP through oxidative coupling. The removal of 2,4-DCP was extremely fast, and a maximal removal could be achieved within 3 min for shepherd' s purse and 15min for turnip. The pH range was from 3.0 to 8.0 and the amount of $H_2O_2$ added was 9mM when maximal removal was achieved(over 90%). No increasing removal of 2,4-DCP was observed due to increasing the amount of $H_2O_2$ added (over 9mM). The initial concentration affected the transformation of 2,4-DCP incubated with plant materials. When turnip was used as catalytic agent, it was observed decreasing transformation of 2,4-DCP due to increasing initial concentration.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.486-490
• /
• 1998

Pt/C powder which was used as electrocatalyst in a Phosphoric Acid Fuel Cell(PAFC) was fabricated by colloid method. It was reported that the sulfur from reductant, $Na_2S_2O_4$, worked as a poison against catalyst during long term operation. To remove these sulfurs, we try to treat Pt/C powder by three different methods. First, we tried to remove the sulfur according to temperature and time in $H_2$ atmosphere. As the heat treatment temperature is raised up, the effect of the removal is increased but the electrode performance is decreased because of the growth of Pt particle size. The optimal heat treatment temperature is $400^{\circ}C$, the size of Pt particle is approximately $35{\sim}40{\AA}$ and the electrode performance is $360mA/cm^2$ at 0.7 V. At $400^{\circ}C$, even though the time of heat treatment is extended, size of Pt, amounts of remaining sulfur and electrode performance is almost constant. Secondly, when we removed in a crucible at $900^{\circ}C$ the removal of the sulfur was not better, but the size of Pt particle, approximately $80{\AA}$, was smaller than that of heat treatment in $H_2$ atmosphere at $900^{\circ}C$. Lastly we treated with solvents such as acetone, benzene, and carbon disulfide. It was observed that sulfur components were removed partly by extraction with solvents, the electrode performances were similar each other.

• Journal of Korea Foresty Energy
• /
• v.19 no.2
• /
• pp.86-92
• /
• 2000

The liquefactions of $\alpha$-cellulose(Sigma Chemical, C-8002, 47H0383) was prepared in the presence of phenol using sulfuric acid as a catalyst under $N_2$ gas protection at $180^{\circ}C$ for 60minutes to examine its components. The ratio of $\alpha$-cellulose to phenol was 1: 6.2(w/w), and that to sulfuric acid was 1: 0.05(g/$m\ell$). The yields of liquefaction were calculated after the liquefied mixtures were passed through 1G4 glass filter. The luquefied product of $\alpha$-cellulose was analyzed using GC-MS Spectormeter. The 12 compounds identified by GC-MS Spectrometer, of which peak area covers 54% as 2,4-dimethyl phenol, p-isopropyl phenol, 1-ethyl-3,5-dimethyl benzene, o-isopropyl phenol, (E)-2,4\` dihydroxy-stilbene, 2,2\`-methylene-bisphenol, 4,4\`-methylenebisphenol, 3-methyl-2-hydroxyphenyl-(E)-2-hydroxyl-4\`-methoxy-stilbene, 1-phyenyl-1-(4\`hydroxyphenyl)methanol phenol derivatives. From this results, the reaction pathways of the liquefaction of cellulose were proposed through electrophilic substitution reaction. Phenol as a solvent might react with the reaction intermediates as well in the cellulose liquefaction.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.73-81
• /
• 1999

Four bis-iodosobenzoic acid derivatives have been synthesizd in 5 steps following literature methods from 5-hydroxyantranilic acid; 1) diazotization and iodination, 2) acid protection, 3) tosylate substitution, 4) acid deprotection, 5) oxidation of iodo-substituent to iodoso group. Catalytic effects of new 5,5'-tri-, tetra-, deca-, polyethyleneglycoxy- bis(2-iodosobenzoic acid) on hydrolysis reactions of PNPDPP(p-nitrophenyl diphenyl phosphate), sarin and soman have been measured to determine the role of ethyleneglycoxy substituents as phase transfer catalysts. At $25{\pm}0.2^{\circ}C$, pH 8.0, and cetyltrimethyl ammonium chloride(CTACl) micelle solution condition, bis-IBA derivatives hydrolyzes PNPDPP with maximum pseudo-first order rate constant($K_{obsd}^{max}$) of 0.32035 ~ 0.13659 $sec^{-1}$, which corresponds to 2~18 times rate increase than those of unsubstituted o-IBA[iodosobenzoate($K_{obsd}^{max}=0.0645sec^{-1}$), iodoxybenzoate ($K_{obsd}^{max}$ = $0.0178 sec^{-1}$)]. At the similar condition for PNPDPP hydrolysis, bis-IBA derivatives also act as efficient catalysts for hydrolytic cleavage of nerve agents such as sarin and soman. Hydrolysis rate constant with 5,5'-polyethyleneglycoxy- bis(2-iodosobenzoic acid) shows 7 times increase than that of simple 5-hydroxy-2-iodosobenzoic acid.

• Journal of the Korean Ceramic Society
• /
• v.39 no.6
• /
• pp.604-609
• /
• 2002

Nanosized $BaCeO_3$ powders with the stoichiometric composition of a molecular level were synthesized by the citrate process based on the Pechini method. Polymeric precursor was formed by use of citric acid and ethylen glycol, as chelating agent of metal ions and reaction medium, respectively. Single phase orthorhombic structured $BaCeO_3$powders, about 100 nm sized and uniform shaped were obtained through the calcination of the polymeric precursor at $900^{\circ}C$ for 4 h. Extremely small quantities of carbonate ions($CO_^{2-}$) were completely decomposed at over $1100^{\circ}C$. The mean size of the powders was increased twice, however, it has very uniform distribution in its size and shape.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.292-298
• /
• 2003

In this study, the photooxidation and ozonation of humic acid (HA) in aqueous solution were conducted and the treated HA samples at different reaction time were analyzed using ultrafiltration techniques to evaluate the change of their molecular size distributions with its DOC removal. Molecular size distribution of untreated HA showed 41.5% in higher molecular size fractions (>30,000 daltons) and 15.2% in much smaller molecular size fraction (<500 daltons). As UV irradiation time was increased, it was observed that the degradation of the large molecules of the fraction of >30,000 daltons into much smaller molecules was increased. In UV system, the HA molecules of the fraction of <500 daltons became significantly more and its percentage was increased from 35.3% (UV only irradiation) to 58.9% ($UV/TiO_2$) and 87.8% ($UV/H_2O_2$) in the presence of the photocatalysis. Otherwise, ozonation of HA produced mainly the fraction of medium molecular size ranging from 3,000 to 30,000 daltons with much lower portion (<~7%) in the fraction of <500 daltons. In ozone only system, the fraction of 30,000~10,000 daltons occupied in 41.5% at 60 min of ozonation time. In $O_3/H_2O_2$ system, the fraction of 30,000~10,000 daltons and 10,000~3,000 daltons occupied in 38.9% and 36.2% respectively. Based on these results, we suggested applicable treatment process which could be combined with $UV/H_2O_2$, $UV/TiO_2$ and $O_3$, $O_3/H_2O_2$ system for more effective removal of humic acid in water treatment.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.329-334
• /
• 2009

Yttrium ions doped $TiO_2$ particles have been prepared using a low temperature combustion method. The physical properties were investigated, together with the activity of $TiO_2$ particles as a photocatalyst for the decomposition of methylene blue. From XRD results, the major phase of all the $TiO_2$ particles prepared under basic condition was an anatase structure but a rutile peak was observed when they are prepared under acidic condition. The crystallite size of $TiO_2$ particles was decreased as the molar ratio of CA/TTIP increased. The photocatalytic activity increased with an increase of CA/TTIP molar ratio and pH in the solution. In addition, the doping of 1.0 mole% yttrium ion on the $TiO_2$ enhanced the photocatalytic activity and showed the higher activity than commercial P-25 catalyst.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.81-85
• /
• 2004

Nanoporous materials with nanometer-sized pores, are of great interest in the various applications such as selective adsorbents, heterogeneous catalysts and catalyst supports because of their high porosity, surface area, and size selective adsorption properties. This study is aimed to prepare nanoporous catalytic materials on the basis of two-dimersional clay by pillaring of $SiO_2$ sol particles. $SiO_2$ Pillared Montmorillonite (Si-PILM) was prepared by ion exchanging the interlayer $Ni^{2+}$ ions of clay with $SiO_2$ nano-sized particles of which the surface was modified with nicked polyhydroxy cations sach as $Ni_4(OH)_4^{4+}$. Nano-sized $SiO_2$ particles were formed by the controlled hydrolysis of tetraethyl orthosilicate (TEOS). Upon pillaring of $Ni^+$-modified $SiO_2$ nano particles between the clay layers, the basal spacing was expanded largely to $45{\AA}$ and the extremely large specific surface area ($S_{BET}$) of $760m^2/g$ was obtained.

• The Korean Journal of Pharmacology
• /
• v.21 no.1
• /
• pp.62-77
• /
• 1985

In tile Iron-catalyzed Haber-Weiss reaction to produce OH., the requirement for $O^{-}_{2}{\cdot}$ is only to reduce $Fe^{+++}$. Possibly, the role of $O^{-}_{2}{\cdot}$ can be replaced by other reducing agents. Ascorbate is one of them in biological system. In the present study, the ability of ascorbate to produce $OH{\cdot}$ in the presence of $Fe^{++}$ and $H_2O_2$ was investigated by observing the degradation of hyaluronic acid and ethylene production from methional. Ascorbate stimulated the degradation of hyaluronic by $Fe^{++}$ and $H_2O_2$. That was confirmed by both viscosity change and gel-permeation chromatographic analysis. The observed degradation was almost completely prevented by catalase and $OH{\cdot}$ scavengers. In support of the above results, ascorbate enhanced the prouction of ethylene from methional in the presence of $Fe^{++}$ and $H_2O_2$. Other reducing agents (cysteine, glutathione, NADH and NADPH) showed similar activities to ascorbate in the degradation of hyaluronic acid and ethylene production. But no stimulatory effects were observed with their oxidized forms such as NAD and NADP. Thus, it appears that reduction of the metal ion was needed for $OH{\cdot}$ production. Among the metal ions tested, $Fe^{++}$ showed most potent catalytic action in the production of $OH{\cdot}$ The results obtained support that ascorbate can substitute $O^{-}_{2}{\cdot}$ in the metal-catalyzed reactions, particularly with $Fe^{++}$ by which $OH{\cdot}$ is produced with $H_2O_2$. The significance of the ascorbate-dependent production of $OH{\cdot}$ was considered with respect to possible role of ascorbate in the damage of inflamed joints.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.871-877
• /
• 1994

Most of the aromatic nitro compounds were reduced to amines in high yield by transfer of hydrogen from 4-vinyl cyclohexene to the substrate via palladium catalyst. The usefulness of the method is not affected by the presence of a variety of other functional groups such as -OH, $-OCH_3$, $-CH_3$, $-CO_2H$, and -Cl, except for halogen which is removed during hydrogenation. The reduction of ortho-substituted nitrobenzene such as o-nitrotoluene, o-nitrophenol, o-nitroanisole was slower than the para isomer. Typically, the nitro compound is refluxed in ethanol with a large exess of 4-vinylcyclohexene in the presence of Pd-C catalyst. Under the above conditions, p-nitrobenzaldehyde, p-nitrobenzyl alcohol, and p-nitrobenzyl acetate were reduced to p-toluidine.