• 제목/요약/키워드: $H_2O$ content

검색결과 1,761건 처리시간 0.037초

THE EFFECT OF Cu SUBSTITUTION ON THE PROPERTIES OF NiZn FERRITE

  • Nam, J.H.;Jung, H.H.;Shin, J.Y.;Oh, J.H.
    • 한국자기학회지
    • /
    • 제5권5호
    • /
    • pp.548-551
    • /
    • 1995
  • The effect of Cu substitution on the properties of NiZn ferrites sintered at low temperature with composition is investigated. The densification of NiCuZn ferrite in dependent upon Cu content in the composition of (N/sub 0.5-x/Cu/sub x/ Zn/sub 0.5/O)(Fe/sub 2/O/sub 3/)/sub 0.98/. Electrical resistivity is maximum at x=0.2. Dispersion characteristics of complex permeability of (Ni/sub 0.5-x/ Cu/sub x/Zn/sub 0.5/O)(Fe/sub 2/O/sub 3)/sub 0.98/ is observed above x=0.3 and relaxation frequency increases with higher temperature. The magnetic loss of NiCuZn ferrite is occurred above the Cu content x=0.3 at a low frequency.

  • PDF

천화분 메탄올 추출물의 멜라닌 형성 억제 효과 (Inhibitory Effect of Methanolic Extract from Radix Trichosanthis on Melanin Synthesis)

  • 김정근;김남권;임규상;김진;성병곤
    • 대한한의학회지
    • /
    • 제23권4호
    • /
    • pp.45-54
    • /
    • 2002
  • Objectives: In order to investigate the relationship of Radix Trichosanthis components and the melanin synthesis, the author has analyzed the cell viability and tyrosinase activity, melanin content and morphologic changes in n-hexane, EtOAc, n-BuOH, and H2O fraction. Methods: At first, in order to determine the concentration of the Radix Trichosanthis component, the author investigated the viability of B16 melanoma cell. To measure the effects of Trichosanthes kirilowii extracts (n-BuOH, n-Hexane, EtOAc, H2O fractions) on the viability of A549 cells, A549 cells were treated with various concentrations (from 0.5 to $25{\;}\mu\textrm{g}/ml$) of components of Trichosanthes kirilowii. After 24hrs, the cell viability was measured by MTT assay. The EtOAc components of Trichosanthes kirilowii decreased the viability of A549 cells in a dose-dependent manner. H2O and n-BuOH components had no cell toxicity till $25{\;}\mu\textrm{g}/ml$, the n-hexane component showed minor cell toxicity at $25{\;}\mu\textrm{g}/ml$ and the EtOAc component cell toxicity was revealed at $5{\;}\mu\textrm{g}/ml$ concentration. Results: 1. The results of tyrosinase activity and the Radix Trichosanthis component; n-hexane and EtOAc components controlled it effectively; the n-BuOH components were less effective. 2. The results of melanin content analysis showed that the n-hexane and EtOAc components effectively inhibited, the n-BuOH fraction inhibited less, and H2O component didn't inhibit the terminal melanin formation. 3. In the n-BuOH and H2O component there were no changes, but in the n-hexane component the melanin content was effectively inhibited. 4. In the EtOAc fraction, although the melanin content was inhibited, the cell count was evidently suppressed, Of all of the Radix Trichosanthis components, the n-Hexane and EtOAc fractions inhibited the melanin synthesis best, but owing to its toxicity, the EtOAc components inhibited the cell count. Conclusion: The above results demonstrated that Radix Trichosanthis n-hexane fraction efficiently inhibited the tyrosinase activity and melanin synthesis.

  • PDF

Potential use of ultrasound in antioxidant extraction from Ecklonia cava

  • Lee, Seung-Hong;Kang, Min-Cheol;Moon, Sang-Ho;Jeon, Byong-Tae;Jeon, You-Jin
    • ALGAE
    • /
    • 제28권4호
    • /
    • pp.371-378
    • /
    • 2013
  • Water and methanolic extracts of Ecklonia cava, a marine brown alga, were prepared by ultrasonic extraction (UE) and conventional extraction (CE) methods. The radical-scavenging activity and the inhibitory effects against hydrogen peroxide ($H_2O_2$)-induced DNA damage of the extracts were investigated. All extracts prepared by CE exhibited higher total polyphenolic content than that in the extracts prepared by UE. Extraction yield and total phenolic content increased as the UE time increased. The radical-scavenging activities increased as the UE time increased. All extracts prepared by CE exhibited higher 1,1-diphenyl-2-pricrylhydrazyl (DPPH) and hydroxyl radical-scavenging activities than did those prepared by UE. Extracts prepared by UE showed stronger scavenging activities on alkyl radical and $H_2O_2$ than those prepared by CE did. Methanolic extract with UE 12 h (100MEU-12h) and methanolic extract with CE 24 h (100MEC-24h) were selected and evaluated by comet assay for their inhibitory effect against $H_2O_2$-induced DNA damage. 100MEU-12h showed slightly greater protective effect against $H_2O_2$-induced DNA damage than 100MEC-24h. Thus, UE can be effectively used as a seaweed extraction technique, and there is potential for scale-up of the extraction process.

광릉 전나무인공림에서 수액이동량, 토양수분장력 그리고 토양함수량의 변화와 상호작용 (Interactions and Changes between Sapflow Flux, Soil Water Tension, and Soil Moisture Content at the Artificial Forest of Abies holophylla in Gwangneung, Gyeonggido)

  • 전재홍;김경하;유재윤;정용호;정창기
    • 한국산림과학회지
    • /
    • 제94권6호
    • /
    • pp.496-503
    • /
    • 2005
  • 본 연구는 2004년 9월에서 10월까지 경기도 광릉시험림내 국립산림과학원 산림수문 유역시험지인 전나무 인공림에서 수목의 증산에 의해 나타나는 수액이동량과 토양수분장력 및 토양함수율의 변화를 조사하고, 이들 간의 상호작용을 밝히기 위하여 수행되었다. 대상지인 전나무림은 1976년 조림지로서 1996년 2월부터 7월까지 1차 간벌과 가지치기를 실시하였으며 2004년 4월에 2차 간벌과 가지치기를 실시하였다. 수액이동량은 수액유속계로 측정하였으며, 토양수분장력은 사면부와 계류부에 텐시오미터를 설치하여 조사하였다. 토양함수량은 사면부에 10, 30, 50 cm 깊이로 TDR을 매설하여 관측하였으며, 각 조사항목들은 30분단위로 측정하여 데이터로거에 저장하였다. 조사기간 동안 일일 평균수액이동량은 10.16l이고, 최대는 15.09l, 최소는 0.01l였다. 시간별로는 9시부터 수액이동량이 증가하기 시작하여 13시에 최대치인 30분당 0.74l에 달하였으며, 15시까지 그 값이 유지된 후 급감하기 시작하여 19시를 지나면서 0으로 수렴하였고 야간에는 수액이동이 거의 없었다. 강우시에는 주간에도 수액이동량이 거의 없는 것으로 나타났다. 토양수분장력은 사면에서 평균 $-141.3cmH_2O$, $-52.9cmH_2O$, $-134.2cmH_2O$로 낮았으며, 계류부 사이의 완경사지에서 평균$-6.1cmH_2O$, $-18.0cmH_2O$ and $-3.7cmH_2O$로 높게 나타났다. 특히 토양수분에 대한 강우의 영향이 감소된 후 사면의 토양수분장력은 수목의 증산에 따라 일주기성을 나타내어 수액이동량이 증가하면 토양수분장력이 낮아지고 수액이동량이 감소하면 토양수분장력이 높아지는 경향을 보였으나, 계류부에서는 수액이동량의 영향을 파악할 수 없었다. 토양함수율은 강수 종료 후 지속적으로 감소하였으며, 사면부의 토양수분장력과 같이 증산에 따른 일주기성을 나타내어 주간에는 토양함수율이 감소하였고 수액의 이동이 거의 없는 야간에는 함수율이 유지되거나 또는 소폭 상승하는 경향이 나타났다. 이상의 결과로 수액이동량의 변화에 따른 토양수분의 변화는 사면부와 계류부에서 다르게 나타나는 것을 알 수 있었다.

Oxidative modification of ferritin induced by hydrogen peroxide

  • Yoon, Jung-Hwan;An, Sung-Ho;Kyeong, Inn-Goo;Lee, Myeong-Seon;Kwon, Sang-Chul;Kang, Jung-Hoon
    • BMB Reports
    • /
    • 제44권3호
    • /
    • pp.165-169
    • /
    • 2011
  • Excess free iron generates oxidative stress that may contribute to the pathogenesis of various causes of neurodegenerative diseases. In this study, we assessed the modification of ferritin induced by $H_2O_2$. When ferritin was incubated with $H_2O_2$, the degradation of ferritin L-chain increased with the $H_2O_2$ concentration whereas ferritin H-chain was remained. Free radical scavengers, azide, thiourea, and N-acetyl-$_L$-cysteine suppressed the $H_2O_2$-mediated ferritin modification. The iron specific chelator, deferoxamine, effectively prevented $H_2O_2$-mediated ferritin degradation in modified ferritin. The release of iron ions from ferritin was increased in $H_2O_2$ concentration-dependent manner. The present results suggest that free radicals may play a role in the modification and iron releasing of ferritin by $H_2O_2$. It is assumed that oxidative damage of ferritin by $H_2O_2$ may induce the increase of iron content in cells and subsequently lead to the deleterious condition.

Y(NO3)3·6H2O 첨가된 AlN 소결체의 기계적 및 열전도도 특성 (Mechanical and Thermal Conductivity Properties of Yttrium Nitrate Added AlN Sintering Body)

  • 정준기;이정훈;하태권
    • 소성∙가공
    • /
    • 제27권1호
    • /
    • pp.48-53
    • /
    • 2018
  • Aluminum nitride (AlN) is used by the semiconductor industry that has requirements for high thermal conductivity. The theoretical thermal conductivity of single crystal AlN is 320W/mK. Whereas, the values measured for polycrystalline AlN ceramics range from 20 W/mK to 280 W/mK. The variability is strongly dependent upon the purity of the starting materials and non-uniform dispersibility of the sintering additive. The conventional AlN sintering additive used yttria ($Y_2O_3$), but the dispersibility of the powder in the mixing process was important. In this study, we investigated the mechanical and thermal conductivity of yttrium nitrate ($Y(NO_3)_3{\cdot}6H_2O$), as a sintering additive in order to improve the dispersibility of $Y_2O_3$. The sintering additives content was in the range of 2 to 4.5wt.%. The density of AlN gradually increased with increasing contents of sintering additive and the flexural strength gradually increased as well. The flexural strength of the sintered body containing 4 wt% of $Y_2O_3$ and $Y(NO_3)_3{\cdot}6H_2O$ was 334.1 MPa and 378.2 MPa, respectively. The thermal conductivities were 189.7W/mK and 209.4W/mK, respectively. In the case of hardness, there was only a slight difference and the average value was about 10 GPa. Therefore, densification, density and strength values were found to be proportional to its content. It was confirmed that AlN using $Y(NO_3)_3{\cdot}6H_2O$ displayed relatively higher thermal conductivity and mechanical properties than the $Y_2O_3$.

무가압침투법에 의한 $Al_2O_3/Al$ 복합재료의 제조특성 (Fabrication of $Al_2O_3/Al$ Composites by Pressureless Infiltration Technique)

  • 김재동;김형진;고성위
    • 동력기계공학회지
    • /
    • 제3권2호
    • /
    • pp.57-63
    • /
    • 1999
  • The fabrication of $Al_2O_3/Al$ composites by pressureless infiltration technique was made to investigate the effects of processing variables such as content of Mg, processing temperature and time on the infiltration behavior of molten Al and microstructure. When the pure Al was infiltrated into mixtures of Mg and $Al_2O_3$ powder, processing temperature required to spontaneous infiltration was decreased and critical processing temperature and Mg content were $700^{\circ}C$ and 3wt% respectively. The content of Mg was found the most powerful variable for infiltration of molten Al. The infiltration ratio increased with Mg content and processing temperature, however the $Al_2O_3/Al$ composites which were fabricated by high Mg content and processing temperature resulted in non uniform dispersion of $Al_2O_3$ particles by excessive interfacial reaction. XRD pattern indicated that $MgAl_2O_4$ and AIN was observed at the interface of $Al_2O_3$ particles and in the Al matrix as reaction products.

  • PDF

폐수처리 슬럿지와 퇴비 및 목탄의 화학적 특성과 구조에 관한 연구 (A Study on the Chemical Composition and Structure of Sludge, Compost and Charcoal)

  • 임기표;위승곤
    • 펄프종이기술
    • /
    • 제35권1호
    • /
    • pp.27-32
    • /
    • 2003
  • To understand the chemical structure of sewer sludge in comparison with commercial compost and charcoal used as a soil improver, it was carried out to analyse their ash contents and metal ions, and to elucidate the chemical structure of their residuals after a sequential treatment of alcohol-benzene(1:2) extraction in Soxhlet, 3% HCl reflux and 79% H₂SO₄ hydrolysis, using CHNS analyzer and solid C-13 NMR spectrometer. The results obtained were as follows: 1. Ash content of sludge was about 46% that is higher than those of compost (17%) and charcoal (4%). 2. The residual of sludge after a sequential treatment of HCl and H₂SO₄ hydrolyses had high ash content about 23%, too. 3. The sludge seems to be suitable to the soil improver because the content of heavy metal ions in sludge was near the compost and below the organic fertilizer standard. 4. Elemental composition of sludge residual after HCl-H₂SO₄ hydrolyes was C/sub 56/H/sub 91/O/sub 12/N₂S = (C/sub 6/H/sub 10/O/sub 5/)/sub 7/(C/sub 6/H₄)/sub 7/C₂H/sub 43/O₂N₂S, similar to C/sub 103/H/sub 122/O/sub 33/N/sub 6/S = (C/sub 6/H/sub 10/O/sub 5/)/sub 6/(C/sub 6/H₄)/sub 10/C/sub 7/H/sub 22/O₃N/sub 6/S of compost. 5. The sludge residual had proved to have both considerable aliphatic and aromatic groups, but the compost residual to have mainly aliphatic groups and the charcoal to have mainly aromatic groups, through the peak analysis of solid C-13 NMR charts. 6. So, the sewer sludge is proved to have a considerable amount of aromaticity like in woody biomass containing lignin.

Photocatalytic Activity of Electrospun PAN/TiO2 Nanofibers in Dye Photodecomposition

  • Ji, Byung Chul;Bae, Sang Su;Rabbani, Mohammad Mahbub;Yeum, Jeong Hyun
    • 한국염색가공학회지
    • /
    • 제25권2호
    • /
    • pp.94-101
    • /
    • 2013
  • Poly(acrylonitrile) (PAN) nanofibers containing different amounts of titanium dioxide ($TiO_2$) have been prepared by electrospinning technique. Photocatalytic activity of these electrospun PAN/$TiO_2$ nanofibers and the effect of $TiO_2$ content on the photocatalytic efficiency of PAN/$TiO_2$ nanofibers have been evaluated by monitoring the photodecomposition of fluorescein dye, rhodamine B and methylene blue under UV irradiation with respect to irradiation time. Moreover, the effect of hydrogen peroxide ($H_2O_2$) on the photocatalytic behavior of PAN/$TiO_2$ nanofibers has also been investigated. The results showed that PAN/$TiO_2$ nanofibers are effective photocatalyst and their photocatalytic efficiency increases with the increase of $TiO_2$ content in the PAN/$TiO_2$ nanofibers. It is also observed that the presence of $H_2O_2$ significantly enhances the photocatalytic ability of PAN/$TiO_2$ nanofibers. The morphology and the photocatalytic behavior of the PAN/$TiO_2$ nanofibers containing different amounts of $TiO_2$ nanoparticles have been investigated by field-emission scanning electron microscopy (FE-SEM) and UV/Visible spectroscopy, respectively.

석탄가스를 이용한 직접 황 회수공정을 위한 SnO2-ZrO2(Sn/Zr=2/1) 촉매 상에서의 CO에 의한 SO2 환원 반응: 반응조건 최적화 및 수분의 영향 (SO2 Reduction with CO over SnO2-ZrO2(Sn/Zr=2/1) Catalyst for Direct Sulfur Recovery Process with Coal Gas: Optimization of the Reaction Conditions and Effect of H2O Content)

  • 한기보;신부영;이태진
    • 공업화학
    • /
    • 제18권2호
    • /
    • pp.155-161
    • /
    • 2007
  • 본 연구에서는 $SnO_2-ZrO_2$(Sn/Zr = 2/1) 촉매 상에서의 CO에 의한 $SO_2$ 환원반응에 대한 반응온도, 공간속도, [CO]/[$SO_2$] 몰비 등의 반응조건의 최적화를 위한 반응특성을 조사하였다. $300{\sim}550^{\circ}C$의 반응온도, $5000{\sim}30000cm^3/g_{-cat}{\cdot}h$의 공간속도, 1.0~4.0 의 [CO]/[$SO_2$] 몰비 등 다양한 반응조건 범위에서 CO에 의한 $SO_2$ 환원반응에 대한 영향을 살펴본 결과, 최적 반응조건으로 반응온도, 공간속도, [CO]/[$SO_2$] 몰비는 각각 $325^{\circ}C$, $10000cm^3/[g_{-cat}{\cdot}h]$, 2.0이었다. 이 때 $SO_2$ 전환율은 약 99% 이상이었으며, 원소 황 선택도는 95% 이상이었다. 또한 CO에 의한 $SO_2$ 환원반응에서 수분에 대한 영향을 조사한 결과, 수분함량이 2.0~6.0 vol%인 범위에서 수분의 함량이 높을수록 $SO_2$ 전환율 및 원소 황 선택도가 감소됨과 동시에 반응성이 저하됨을 알 수 있었다. 2 vol%의 수분이 함유된 반응조건에서 반응온도와 [CO]/[$SO_2$] 몰비를 각각 $300{\sim}400^{\circ}C$ 및 1.0~3.0으로 변화시킨 결과, 반응온도와 [CO]/[$SO_2$] 몰비가 각각 $340^{\circ}C$와 2.0인 조건에서 가장 높은 반응성을 얻었다. 이 때 $SO_2$ 전환율이 약 90%였으며, 원소 황 선택도는 약 87%였다