• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.1-7
• /
• 2015

In this study, characteristics of reforming process of automotive liquefied petroleum gas (LPG) fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2/C$ ratios, reactant flow rate and metal form on the process were investigated. In the test of varying $O_2/C$ ratio from partial oxidation to stoichiometry combustion, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2/C$ ratio for the highest $H_2$ yield was determined to be around 1.0 for 20~50 lpm, and 1.35 for 100 lpm. Specific energy density (SED) was major factor in reforming process and higher SED leads to higher $H_2$ yield. And metal form in the reformer increased $H_2$ yield of about 34 % as compared to the case of no metal form. The result can be a guide to map optimal condition of reforming process.

• 한국수산과학회지
• /
• 제31권1호
• /
• pp.127-131
• /
• 1998

추출용매비 및 추출시간을 각각 50배 (w/v), 3시간으로 일정하게 하고 추출온도 ($60\~100^{\circ}C$)와 pH($2.0\~13.5$)를 달리하면서 crude porphyran을 제조하여 수율과 화학조성 을 조사하였다. Crude porphyran의 화학조성은 추출온도와 pH에 따라 크게 달라져서 산성영역에서 추출한 crude porphyran은 중성영역에서 추출한 것에 비해 수율 및 황산기 함량은 더 많으면서 단백질을 더 적게 함유하나 분자량도 작아지는 것으로 나타났고, 알칼리 영역에서 추출하는 경우는 황산기가 떨어져 나가고 단백질의 혼입량이 많아지는 것으로 나타났다. 따라서 실험목적에 따라 추출조건이 달라져야 함을 알 수 있었는데 수율의 증가 및 저분자화를 위해서는 pH $3\~4$의 조건이, 그리고 시료내 존재하는 porphyran을 분자량의 변화 없이 추출하기 위해서는 중성 영역에서 추출하는 것이 적절할 것으로 사료된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권7호
• /
• pp.929-934
• /
• 2000

Optimum stand density of alfalfa (Medicago sativa L.) varies with locations and climates. Stand density is one of the factors that determines herbage yield, forage quality and persistence of alfalfa. As establishment costs increase, the question arises whether present population densities are optimum for obtaining maximum herbage yield and forage quality. The objectives of this study were: 1) to determine the optimum plant density for highest herbage yield and forage quality for the dehydrated alfalfa industry under Edmontons climatic conditions in Alberta, Canada; 2) to compare herbage yield and forage quality of the cultivars 'Algonquin' and 'Vernal' grown at a range of stand densities. Alfalfa seedlings of both cultivars were either transplanted at spacings of 6, 10, 15 and 25 cm or direct seeded at the 4.5 cm plant spacings, providing population densities of 494, 278, 100, 45 and $16plants/m^2$. The experimental design was a randomized complete block with a split-plot arrangement having three replicates; the main plots consisted of two alfalfa cultivars Algonquin and Vernal, and the sub-plots were the five population densities. The cultivar Vernal had significantly higher annual yield than did the cultivar Algonquin. There was no significant effect of plant density on herbage yield. There was no difference in crude protein (CP) between the two cultivars. At the first cut, there was a significant quadratic effect of plant density on CP content and the greatest CP occurred at the 100 plants/m2 density. Crude protein was not affected by plant density at the second cut. Acid detergent fiber (ADF) and neutral detergent fiber (NDF) were not affected by plant density. The cultivar Algonquin usually had a lower ADF and NDF than cultivar Vernal. In conclusion, high population densities ($278plants/m^2$ or more) of alfalfa did not improve herbage yield and forage quality compared with low plant population densities ($100plants/m^2$ or less) of alfalfa.

• 한국초지조사료학회지
• /
• 제9권3호
• /
• pp.129-134
• /
• 1989

This experiment was conducted to evaluate the effect of cutting frequency and nitrogen fertilization on th change of vegetation and the yield of dry matter on the different mixture combination of permanent pasture. 1. DM yield was increased as the increasing Arrhenatherum elntius but was decreased as the increasing Tkisetum fkavescens. 2. DM yield was unaffectdd by the different mixture combination of permanent pasture eventually. 3. In case of cutting frequency, 2-cutting showed higher DM yield than that of 3-cutting, and N-fertilization level showed significant increase in DM yield as the increasing N-level, especially 2-cutting block of N-3 showed the highest yield and 3-cutting block of N-l showed the lowest yield. 4. Mixture combination, N-level and cutting frequency did not show significant changes in DM yield of permanent pasture eventually.

• Bulletin of the Korean Chemical Society
• /
• 제10권6호
• /
• pp.500-503
• /
• 1989

Synthetic studies have been carried out for the addition or substitution of phosphorus nucleophiles to the cation $[(exo-6-R-{\eta}^ {5_-}2-MeO-C_6H_5)Mn(CO)_2NO]PF_6,$ 2. $PPh_3$ reacts with 2 to yield the CO displaced product and $MePPh_2$ attacks the dienyl ring of 2 to yield the phosphonium adduct or the metal to give the CO displaced depending upon the reaction temperatures. Nucleophilic addition of HPPh2 to the dienyl ring of 2 gives a neutral substituted product. $P(OMe)_3$ reacts with 2 to yield a mixture of ring adduct and CO displaced product at room temperature. $At - 20^{\circ}C,\;P(OMe)_3$ attacks the dienyl ring of 2 to give a posphonium adduct, which underwent Arbuzov reaction. This reaction affords a new route to the phosphonate complexes.

• KSBB Journal
• /
• 제14권6호
• /
• pp.639-642
• /
• 1999

키토산 올리고당을 보다 효율적으로 생산하고자 효소와 기질간의 특성을 조사한 다음, 이를 바탕으로 기질을 단계별로 첨가하여 생산 효율을 높일 수 있었다. 본 실험에 사용된 효소의 안정성을 조사한 결과 pH 5.0에서 6일 후에도 약 90% 이상의 효소활성을 유지하였다. 기질이 초기 농도에 따른 겉보기 수율은 0.5~2% 키토산 용액은 약 90% 이상이었으며, 그이상의 농도일 경우 감소하였다. 그래서, 수율을 증가시키기 위해 초기 반응 속도 및 겉보기 수율이 높은 기실 농도에 기질을 단계 별로 첨가한 결과, 분해 반응에 있어 겉보기 수율은 64.6%에서 83.2%로 증가하였고, 이에 따라 키토산 올리고당의 생산량은 10.52 mg/mL에서 12.26 mg/mL로 증가하였다. TLC분석 결과 Batch type과 기질을 단계별로 첨가하였을 경우의 올리고당 조성은 주로 3-5당이었다. 키토산 올리고당 생산을 위한 최적의 반응 조건은 pH 5.0, 40$^{\circ}C$에서 초기 반응 속도 및 수율이 높은 기질 농도인 2% 키토산 용액에 기질을 3시간마다 첨가할 때였다. 반응 시간에 따른 기질의 양과 효소를 보다 더 최적화하여 키토산 올리고당의 최종 농도와 겉보기 수율을 증가시킬 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제25권11호
• /
• pp.1920-1927
• /
• 2015

This study aimed to optimize four factors affecting biomass accumulation and 5-aminolevulinic acid (ALA) yield together with pollutants removal in Rhodobacter sphaeroides wastewater treatment. Results showed that it was feasible to produce biomass and ALA in R. sphaeroides wastewater treatment. Microaerobic, 1,000-3,000 lux, and pH 7.0 were optimal conditions for the highest ALA yield of 4.5 ± 0.5 mg/g-biomass. Under these conditions, COD removal and biomass production rate were 93.3 ± 0.9% and 31.8 ± 0.5 mg/l/h, respectively. In addition, trace elements Fe²⁺, Mg²⁺, Ni²⁺, and Zn²⁺ further improved the ALA yield, COD removal, and biomass production rate. Specifically, the highest ALA yield (12.5 ± 0.6 mg/g-biomass) was achieved with Fe²⁺ addition.

• 한국물환경학회지
• /
• 제21권2호
• /
• pp.169-175
• /
• 2005

This study was carried out to investigate the effects of irrigation water pollution on the yield and grain quality of rice. It acquires fundamental data to set up water quality standards for irrigation and produce agricultural safety products. The correlations of BOD, T-N, T-P, pH, ECw of the irrigation water with yield, grain appearance quality, and the protein content were evaluated. The field and pot experiments were conducted by using Japonica of Oryza sativa L. during 2 years. BOD concentration in irrigation water effects strongly on grain appearance quality and yield of rice. T-N in irrigation water has strong effect on the yield, appearance, and quality of rice. T-P concentration in irrigation water have not any correlation with yield and quality of rice. pH showed strongly negative correlation with maturity ratio(MTR), 1000 grain weight(TGW), and yield of rice(YLD) as r=-0.803~-0.828(p<0.001) and have no effect on the appearance quality of rice. $EC_w$ indicating salt content showed strongly negative correlation with MTR, TGW, number of grains per panicles(NGP), and number of panicles per unit area(NPM) as r=-0.759~-0.798, and with YLD as -0.753.

• 한국작물학회지
• /
• 제60권1호
• /
• pp.17-22
• /
• 2015

A total of CNU 28 hybrids were developed at the CNU Corn Breeding Lab. were evaluated to identify new cultivars in botanical characteristics, fresh yield per 10a and taste qualities. Most of these hybrids were stable in environmental stresses such as lodging, disease and insects. Stem height ranged from 115.0 to 239.3 cm, and ear height ranged from 30.7 to 107.0 cm. The ear height to stem height ratio was showed low than 50% of standard as a stable plant type to lodging. The range of ear length was 14.2 cm to 23.0 cm. Especially, CNU 13H-73 was very longest ear as a 23 cm. The fresh yield per 10a was high in purple of CNU13H-79 hybrid than control hybrid Miheuckchal, and CNU13H-73 in white hybrid was similar Yeonnong check hybrid. The 100-kernel weights in CNU13H-3 and CNU13H-9 hybrids were higher than that of the control hybrid. CNU13H-98 among hybrids had a 100-kernel weight of 20.32 g, which was heavier than that of the control hybrid Daehackchal Gold 1. The average pericarp thickness was $41.4{\mu}m$, CNU13H-46 among hybrids had a very thin pericarp as a $35.5{\mu}m$. The mean sugar content of the used hybrids was 14.95 brix%; CNU13H-73 and CNU13H-55 had higher than Mibak2 as a control hybrid.

• Bulletin of the Korean Chemical Society
• /
• 제13권2호
• /
• pp.176-179
• /
• 1992

New method for preparing cyclopentanediol from bicyclic ketal is described. Bicyclic ketal is cleaved to give 1,5-diketone, which is then reductively coupled intramolecularly to yield 1,2-cyclopentanediol. A solution of bicyclic ketal (1a) in methylene chloride was treated with aluminum chloride(2 eq.)-sodium iodide(l.5 eq.) at ambient temperature for 3 h to give the 1,5-diketone (2a) in 71% yield after basic work-up followed by short path column chromatography. A solution of the 1,5-diketone (2a) in THF was reacted with titanium tetrachloride(6 eq.)-Mg(Hg)(0.3 eq.) at $0^{\circ}C$ for 4 h to give the 1,2-cyclopentanediol (3a) in 75% yield after basic work-up followed by short path column chromatography.