• Korean Journal of Food Science and Technology
• /
• v.30 no.3
• /
• pp.557-561
• /
• 1998

This study was conducted to investigate the functionality of soybean protein isolates extracted in acidic range (pH 2.0 and 3.0), neutral range (pH 7.0) and alkaline range (pH 10.0 and 12.0). The protein content of soybean protein isolates extracted at pH 3.0 was maximum (93.31%), but that of pH 7.0 was minimum (73.93%). The extraction yield of soybean protein isolates extracted at pH 3.0 was minimum (0.36%), but that of pH 12.0 was maximum (47.54%). The functionality (solubility, water absorption, oil absorption, foam capacity, foam stability, emulsion capacity and gelation) of soybean protein isolates was significantly influenced by pH of extraction medium. The soybean protein isolates extracted at pH 2.0 and 3.0 were more soluble at acidic ranges and those of pH 3.0 and 7.0 were more soluble at neutral ranges, but those of pH 2.0, 3.0, 7.0, 10.0 and 12.0 were more soluble at alkaline ranges than other ranges. The soybean protein isolates extracted at pH 2.0 and pH 12.0 gave greater water absorption, oil absorption and foam capacity than those extracted at pH 3.0, pH 7.0 and pH 10.0. And the emulsion capacity of soybean protein isolates was increased by the increase of extraction pH.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.343-349
• /
• 1990

The solubility of protein and phytate was measured at various pH's in distilled water and at various concentrations of NaCl, $CaCl_2\;and\;Na_2SO_3$ solutions, and then optimum condition for producing low phytate protein isolate from perilla flour was investigated. The protein solubility in water showed minimum at pH 4.0 and increased at pH higher or lower than 4.0, while phytate solubility was highest at pH 5.0 and decreased at pH higher or lower than 5.0. In NaCl solution, protein solubility was lowest between pH 3.0-4.0, while phytate solubility was high between pH 2.0-5.0 and abruptly decreased above PH 6.0. In $Na_2SO_3$ solution, protein solubility was lowest between pH 2.0-3.0 and phytate solubility showed maximum values between pH $5.0{\sim}6.0$, and it's solubility was low in 3% salt concentration at all pH ranges. In $CaCl_2$ solution, protein solubility in 3% salt concentration was relatively low at all pH ranges, and phytate solubility showed highest values between pH $2.0{\sim}3.0$ and abruptly decreased (1.0%) above pH 4.0. In order to make low phytate protein isolate, defatted perilla flour protein was extracted at pH9.0 and precipitated at pH 4.0 in 3% NaCl solution. The yield of low phytate protein isolate was 61.4% of total protein. This protein was found to contain 0.02% phytate by weight.

• Applied Biological Chemistry
• /
• v.37 no.4
• /
• pp.259-265
• /
• 1994

To investigate the effects of protein concentration, heat treatment and pH on the foaming properties of sodium caseinate, surface tension, apparent viscosity, turbidity, foaming ability and foam stability at 1.0, 3.0, 5.0, 7.0 and 10.0% (W/V), at 55 and $65^{\circ}C$ and at pH 6.0, 7.0 and 8.0 were examined. The conditions of protein concentrations for the foaming abilities were $3.0{\sim}7.0%$ (W/V). Foam stabilities of heated sodium caseinates were worse than those of unheated sodium caseinates (control) at pH6.0 and 7.0 (p<0.05), while the heated one were better than the unheated at pH 8.0, 10.0% concentrations (p<0.05). Also foam stabilities of sodium caseinate at pH 6.0 were higher than those at pH 7.0 and 8.0. Foaming ability and foam stability were inconsistently effected by changing protein concentration, heat treatment and pH.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.120-126
• /
• 1989

The Kinetics of hydrolysis of styrylphenylsulfone derivatives in 50% methanol-water at 25$^{\circ}$C and ionic strength of 0.10 was investigated by UV spectrophotometry in the pH range of 0.0-14.0. The rate equations, which can be applied over a wide pH range, were obtained. The Hammett rho constants for the hydrolysis are 1.85 at pH 7.0 and 1.54 at pH 13.0, respectively. On the basis of the evidence, it is proposed that the general base-catalysis occurs in the hydrolysis of styrylphenylsulfone derivatives; above pH 11.0, Michael type nucleophilic addition take place, while below pH 9.0, the reaction is initiated by addition of water and from pH 9.0 to pH 11.0 these two reactions occur com-petitively.

• Applied Microscopy
• /
• v.32 no.4
• /
• pp.399-410
• /
• 2002

This study was performed to investigate the effects of Bambusae Caulis in Liquamen (bamboo extract) on the changes of antioxidant enzymes and histopathological changes of liver and kidney in mice when administered in different dosages. The experimental groups were divided into four. For control group, 0.9％ NaCl (0.2 ml/25 g B.W.) and for experimental groups, 5% (H1 group), 10% (H2 group), and 20%(H3 group) bamboo extract diluted with 0.9％ NaCl, were administered (0.2 ml/25 g B.W.) respectively for 28 days at an interval of 48 hours. MnSOD activities were increased in H1 group (46%, P<0.05), H2 group (40%, P<0.05), and H3 group (34%, P<0.05) as compared to the control group. CuZnSOD activities were increased in H1 group (11%, P<0.05), but were decreased in H3 group (13%, P<0.05). The activities of catalase were decreased in H1 group (39%, P<0.05), H2 group (34%, P<0.05), and H3 group (31%, P<0.05) as compared to the control group. Histopathological observation revealed ballooned hepatocytes in the pericentral and periportal veins of H1 group. More ballooned and injured hepatocytes than in H1 group were observed in the H2 and H3 groups. Detachment of endothelial cells of the central vein was observed in the H2 and H3 groups. These results indicated that bamboo extract developed dose-dependent changes in antioxidant enzyme activities and developed histopathological changes of liver and kidney.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.141-149
• /
• 1999

The correlation was investigated between the observed heat of ligation and calculated quantum chemical quantities for octahedral $[M(H_2O)_{6-x}(NH_3)_x]^{2+} (M=Fe(II),\;Ni(II))$ complexes by EHMO(Extended Huckel Molecular Orbital) and ZINDO/1(Zerner's Intermediate Neglected of Differential Overlap)method. The net charge of $Fe^{2+}$ and $Ni^{2+}$ ion of octahedral $[M(H_2O)_{6-x}(NH_3)_x]^{2+}(M=Fe(II),\;Ni(II))$ complexes(x=O, 1, …, 6) decreased with substituting $NH_3$ for $H_2O$ molecules. It has found that a good correlation exists between the observed heat of ligation and the calculated quantum chemical quantities such as net charge of central atom, enthalpy of formation, and total dissociation energy. From this finding, we have obtained the following semiempirical linear equation ${\Delta}H_{obs}=-0.2858_{qFe}+0.8813(r=0.97),\;{\Delta}H_{obs}=-0.8981_{qNi}+1.7929(r=0.95),\;{\Delta}H_{obs}=-0.0031H_{f(Fe)}+0.5725(r=0.97),\;{\Delta}H_{obs}=-0.0095H_{f(Ni)}+0.9193(r=0.97),\;{\Delta}H_{obs}=0.0476E_{diss(Fe)}+0.6434(r=0.94),\;{\Delta}H_{obs}=0.1401E_{diss(Ni)}+1.1393(r=0.93)$.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.1
• /
• pp.17-22
• /
• 2013

In this study, a pH control method by carbon dioxide ($CO_2$) was applied to coagulation process in water treatment plant (WTP) to investigate the coagulation efficiency and residual dissolved aluminum when high pH raw water is flowing into the plant during algal blooming. Existing coagulant dose (1 mg/L in raw water) resulted in the pH reduction of 0.0384 by LAS, 0.0254 by PAC, 0.0201 by A-PAC, and 0.0135 by PACS2, respectively. And then the concentration of dissolved aluminum was 0.02 mg/L at pH 7.44, 0.07 mg/L at pH 7.96, 0.12 mg/L at pH 8.16, 0.39 mg/L at pH 8.38 showing the concentration increase with pH in the coagulation process. It was noteworthy that rapid increase was observed at pH above 8.0 next the rapid mixing. Therefore it is necessarily required to control pH below 7.8 in the coagulation process in order to meet drinking water quality standard of aluminum for high pH raw water into WTP, $CO_2$ injection could control pH successfully at about 7.3 even for the raw water of high pH above 8.0. In addition it was found that the pH control by $CO_2$ injection was significantly effective for coagulation in terms of turbidity removal, coagulant dosage, and residual dissolved aluminum concentration.

• Applied Biological Chemistry
• /
• v.29 no.2
• /
• pp.212-218
• /
• 1986

Proteins in Korean rapeseeds, as in many other plantseeds, are usually bound to phytate molecules. These phytate-bound proteins are of little value as foodstuffs because of their poor solubility in digestive systems. Therefore it is necessary to remove phytates from proteins in order to convert these proteins io a useful foodstuff. In the work, an efficient procedure for removal of phytates from defatted Korean rapeseed was found. The influence of pH on the solubility of protein and phytate of rapeseed flour showed that the former was the lowest at pH 5.0 and began to increase as pH further raised. Meanwhile, the latter was the highest at pH 6.0, however, it was decreased abruptly at alkaline pH, especially to content of 1.3% at pH 11.5. The solubility cf protein was relatively high in NaCl aqueous solution at $pH\;6.0{\sim}8.0$, and did not male any noticeable difference depending on NaCl concentration. On the other hand, the solubility of phytate was high at pH of below 6.0 showing an abrupt decrease at pH of above 6.0. The solubility of protein in $CaCl_2$ aqueous solution was highest at $pH\;6.0{\sim}8.0$, however, there was no significant change at the whole range of tested pH of the solution. A maximum solubility of phytate was shown at $pH\;3.0{\sim}4.0$. And it was decreased abruptly at a higher pH of the above range and also decreased at a lower pH with higher $CaCl_2$ concentration. The solubility of phytate in $Na_2SO_3$ aqueous solution was highest at $pH\;5.0{\sim}8.0$. As the concentration goes up the maximum value of solubility was found to move to higher pHs. Depending on the concentration of $Na_2SO_3$, the decreasing pattern was changed in an alkaline solution. The solubility of phytate in the solution containing low concentration of $Ca^{2+}$ ion was low in all treatments at pH of above 7.0 and showed the maximum value at low pH as $Ca^{2+}$ ion concentration increases. The solubility of protein at pH 11.5 showed the highest value in $1mM\;Ca^{2+}$ ion solution.

• Journal of Food Hygiene and Safety
• /
• v.13 no.2
• /
• pp.112-120
• /
• 1998

This study was performed to investigate the synergistic effect of chitosan and sorbic acid as a new food preservative. So it was performed to investigate inhibitory effect on growh of E. coli 0157:H7, gram negative pathogenic food borne disease bacteria and of S. aureus, gram positive food borne disease bacteria in chitosan, sorbic acid and combination of chitosan and sorbic acid. Minimun Inhibitory Concentration (MIC) of chitosan in E. coli 0157:H7 was 500 ppm at pH 5.0, 250 ppm at pH 5.5, 500 ppm at pH 6.0, and 2000 ppm at pH 6.5, while in Staph. aureus 31.25 ppm at pH 5.0 and 62. 5 ppm at more than pH 5.5. also, MIC of sorbic acid in E. coli 0157:H7 was 500 ppm at pH 5.0, 1500 ppm at pH 5.5, and 2000 ppm at more than pH 6.0, while in Staph. aureus 1500 ppm at pH 5.0 and more than 2000 ppm at more than pH 5.5. Due to the effect of pH in E. coli 0157:H7, MIC of combined chitosan and sorbic acid was 500 ppm of chitosan with 500 ppm of sorbic acid at pH 6.5, but 250 ppm of chitosan with 31.3 ppm of sorbic acid at pH 5.0. In Staph. aureus, there was great effect of chitosan, but neither effect of pH nor sorbic acid. When E. coli 0157:H7 were treated with 500 ppm of chitosan with 500 ppm of sorbic acid and 250 ppm of chitosan with 250 ppm of sorbic acid at pH 6.5, they were inhibited. But, they were increased at the initial concentration of bacteria at 1000 ppm of chitosan in 18 hours, at 500 ppm of chitosan in 36 hours. There was no effect of growth inhibition with sorbic acid but great effect with chitosan on Staph. aureus. The correl~tions between MICs of chitosan and sorbic acid in E. coli 0157:H7 accoding to pH were higher than those in Staph. aureus. R values in E. coli 0157:H7 were 0.95 (p<0.01), 0.99 (p<0.01), 0.97 (p<0.01), and 0.99 (p<0.01) at pH 6.5, 6.0, 5.5, and 5.0 respectively. The synergistic effect of chitosan and sorbic acid in E. coli 0157:H7 could be confirmed from the result of this experiment. Therefore, it was expected that the food preservation would increase or maintain by using sorble acid together with chitosan, natural food additive that did no harm to human body.