• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.979-986
• /
• 2003

Sintering behavior and electrical properties of CeO$_2$ system were investigated as a function of the amount of Gd:$_2$O$_3$, and Sm$_2$O$_3$, addition. Doped CeO$_2$ consisted of a homogeneous solid solution of the cubic fluorite structure within the amount of addition from 0 mol% to 15 mol%. Grain growth rate of Gd$_2$O$_3$-doped CeO$_2$ was much smaller than that of pure CeO$_2$, while densification rate was considerably larger. Thus doped CeO$_2$ showed a higher density than pure CeO$_2$. The electrical conductivity of Ce$_1$-$_{x}$Sm$_{x}$O$_1$-$_{x}$/2 was increased up to x = 0.2. However, with further increasing dopant concentrations, the magnitude of the conductivity was found to decrease remarkably. The ionic conductivity value obtained at $700^{\circ}C$ for 10 mol% Sm$_2$O$_3$-doped CeO$_2$ electrolyte was 4.6${\times}$10$^{-2}$ S$.$$cm^{-1}$ /.EX> /.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.11a
• /
• pp.157-157
• /
• 2002

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.171.2-171
• /
• 2002

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.229-229
• /
• 2013

저온작동형($500{\sim}700^{\circ}$) 고체산화물 연료전지의 전해질 재료의 응용이 기대되는 Gd doped ceria를 고주파 유도결합 열플라즈마 법으로 합성하고 그 특성을 조사하였다. 본 연구에서는 나노 ㄴCeO2 10~100 um의 CeO2와 1~20 um의 Gd2O3를 Ce：Gd이 9:1 mol%와 8:2 mol%의 비율로 혼합한 선구체를 140 kVA의 RF plate power와 O2/Ar 플라즈마 생성 가스 조건에서 형성된 고주파 유도결합 열 플라즈마에 주입하여 ~50 nm 이하의 입도와 fluorite 구조의 결정화된 CeO2 구조를 갖는 Gd doped ceria 나노 분말을 합성하였다. FE-SEM, TEM, XRD, ICP-OES, EDS, BET분석법을 이용하여, 합성된 분말의 입도, 미세구조, 결정 구조, 조성, 표면 등의 특성을 관찰하였다.

• Journal of the Korean Ceramic Society
• /
• v.44 no.3 s.298
• /
• pp.182-187
• /
• 2007

10 mol% $Gd_{2}O_{3}-CeO_{2}$ powder was sintered by microwave in a 2.45 GHz multimode cavity to develop a dense electrolyte layer for intermediate temperature solid oxide fuel cells (IT-SOFCs). Samples were sintered from $1100^{\circ}C$ upto $1500^{\circ}C$ by $50^{\circ}C$ difference and kept for 10 min and 30 min at the maximum temperature respectively. Theoretical density of the sample sintered at $1200^{\circ}C$ for 10 min was 95.4% and increased gradually upto 99% in the sample sintered at $1500^{\circ}C$ for 30 min. All of sintered samples showed very fine microstructures and the maximum average grain size of the sintered sample at $1500^{\circ}C$ for 30 min was $(0.87{\pm}0.42){\mu}m$. Ionic conductvity of the samples were measured by DC 4 probe method.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.187.2-187
• /
• 2003

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.652-658
• /
• 1997

The phase stability in the interface of Sr-doped LaMnO3(LSM)/Gd-doped CeO2(CGO) was examined in this study in order to check the feasibility of using LSM as the cathode material in a low-temperature SOFC(solid oxide fuel cell) using CGO as the electrolyte. For the purpose, CGO powders of Ce0.82Gd0.18O0.91 and two LSM powders having different compositions, La0.9Sr0.1MnO3(LSM10) and La0.5Sr0.5MnO3(LSM50), were synthesized using Pechini method. Then, specimens having the LSM/CGO interface were prepared, heat-treated at 130$0^{\circ}C$ for up to 3 days, and analyzed by XRD and STEM/EDX. Face-centered cubic CGO powders of less than 10 nm size were obtained by calcination of polymeric precursor formed in the process at 45$0^{\circ}C$. Higher calcination temperature of $700^{\circ}C$ was necessary for monoclinic LSM10 and cubic LSM50 powders. LSM powders were coarser than CGO and observed to be in the range of 50~100 nm. No trace of LSM-CGO interaction product was found in the XRD pattern. Also it was known from the concentration profile in the vicinity of the interface that interdiffusion was occurred over only a small penetration depth of ~100 nm order.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.1
• /
• pp.46-55
• /
• 2002

10mo1% Gd$_2$O$_3$ doped CeO$_2$ fine powders were synthesized by the oxalate coprecipitation method. The characteristics and sintering behavior of fine powders were investigated. The oxalate precipitates had the specific surface area of 150$m^2$/g, and appeared to be fine and spherical primary particles with a size of approximately 5.5nm. The decomposition of the precipitates occurred from a temperature around 30$0^{\circ}C$ and it was completed below 40$0^{\circ}C$, resulted in the formation of the oxide. The calcination temperature of the fine powders was suitable at 77$0^{\circ}C$. By introducing fine powders washed with alcohol and ball-milling process after calcination, the sintered body was possible to attain the value of 97% of the theoretical density at low temperature of 130$0^{\circ}C$

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.698-704
• /
• 2001

Doped ceria의 전기전도도는 도핑 원소의 종류와 양에 큰 의존성을 가지고 특정 조성에서 최대 전도도 값을 가지며 높은 dopant 농도에서는 전기전도도는 감소한다. 이런 현상은 dopant와 산소 빈자리 사이의 회합 형성과 관련이 있다고 알려져 있다. 그러나 Gd 이온이 도핑된 ceria의 경우 주된 회합종이 (2G $d_{Ce}$ $V_{o}$ )인지 (G $e_{Ce}$ $V_{o}$ ) 인지는 명확하게 알려져 있지 않다. 본 연구에서는 회합분포가 전기전도도에 미치는 영향을 연구하기 위해 결함의 회합종과 분포가 다른 3가지 경우에 대해서 시뮬레이션을 행하였다. 분자동력학법을 이용하여 다양한 온도와 다른 회합분포의 경우에 대해 산소 확산계수가 계산되어졌으며, 계산된 산소 확산계수는 실험적으로 결정된 bulk 전도도로부터 얻어진 산소 확산계수와 비교되어졌다. 그 결과 (2G $d_{Ce}$ $V_{o}$ )와 (G $e_{Ce}$ $V_{o}$ ) 회합이 공존하며 이들이 통계학적으로 이항 분포를 가지는 경우가 실험적으로 보고된 값과 가장 일치하는 결과를 얻을 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.53 no.5
• /
• pp.500-505
• /
• 2016

Scandia-stabilized zirconia co-doped with $CeO_2$ is a promising electrolyte for intermediate temperature SOFC, but still shows rapid degradation during a long-term operation. In this study, $CeO_2$ (1 mol%) as a stabilizer is partially substituted with lanthanum oxides ($M_2O_3$, M=Yb, Gd, Sm) to stabilize a cubic phase and thus durability in reducing atmosphere. 0.5M0.5Ce10ScSZ electrolytes were prepared by solid state reaction and sintered at $1450^{\circ}C$ for 10 h to produce dense ceramic specimens. With addition of the lanthanum oxide, 0.5M0.5Ce10ScSZ showed lower degradation rates than 1Ce10ScSZ. Since $Gd_2O_3$ showed the highest ionic conductivity among the co-dopants, an electrolyte-supported cell with 0.5Gd0.5Ce10ScSZ was prepared to compare its long-term performance with that of 1Ce10ScSZ-based cell. Maximum power density of 0.5Gd0.5Ce10ScSZ-based cell was degraded by about 2.3% after 250 h, which was much lower than 1Ce10ScSZ-based cell (4.2%).