Titanium and titanium alloys are widely used for orthopedic and dental implants for their superior mechanical properties, low modulus, excellent corrosion resistance and good biocompatibility. In this study, corrosion behaviors of nanotube formed on the bone plate of Ti-6Al-4V alloy for dental use have been investigated. $TiO_2$ nanotubes were formed on the dental bone plates by anodization in $H_3PO_4$ containing 0.6 wt % NaF solution at $25^{\circ}C$. Electrochemical experiments were performed using a conventional three-electrode configuration with a platinum counter electrode and a saturated calomel reference electrode. Anodization was carried out using a scanning potentiostat (EG&G Co, Model 263A USA), and all experiments were conducted at room temperature. The surface morphology was observed using field emission scanning electron microscopy (FE-SEM) and energy dispersive x-ray spectroscopy(EDS). The corrosion behavior of the dental bone plates was examined using potentiodynamic test(potential range of -1500~2000 mV) in a 0.9% NaCl solution by potentiostat (EG&G Co, PARSTAT 2273. USA). The inner diameter of nanotube was about 150~180 nm with wall thickness of about 20 nm. The interspace of nanotube to nanotube was 50 nm. The passive region of the nanotube formed bone plates showed the broad range compared to non-nanotube formed bone plates. The corrosion surface of sample was covered with corrosion products.
The forged iron axe found in the No. 2 wood-framed tomb (the middle 3rd century) of Hwangseongdong, Gyeongju is rectangular on the plane level. It shows an obtuse angle in the edge part, while the joint part has the both sides folded up and shows the traces of wood. Under the reflected light, the Iron axe shines in metal luster, which is bright light gray or light creamy colors. The result of x-ray diffraction analysis shows that the axe consists of magnetite and geothite, which can explain why the composition and structure of the original ore has been kept intact. The microtexture of the axe has the irregular network of ferrite and pearlite, and tile cementite of tiny amount in the ferrite background. The overall treatment of the texture seems to be thermal with a high ratio of carbon. There are fine-grained magnetite, wolframite, quartz, calcite, mica, hornblende and pyroxene inside the axe. Those must be the impurities that they failed to remove in the refining process. The normal ferrite is composed of pure iron whose $Fe_2O_3$ proportion is from 99.16 to $99.84\;wt.\%$. Other than them, the ferrite parts usually contain $Al_2O_3\;and\;SiO_2$. The irregular network of pearlite also contains Impurities including $Al_2O_3\;and\;SiO_2$ and shows highly diverse patterns of carbon content. It's because the axe was carburized after the material was made to resemble pure iron. The decarbonization work didn't go well along the process marks. It's estimated that the original ore was bloom produced in low-temperature reduction and formed around in $727^{\circ}C$, which is eutetic temperature.
제주도 중산간지대의 용암류대지에 분포하며 현무암 및 현무암에서 유래된 화산분출쇄설물을 모재로 하는 토양으로 Andisols로 분류되고 있는 제주통을 재분류하고, 그 생성에 대하여 고찰하고자 제주통 대표단면의 형태적 특성을 조사하고, Soil Taxonomy의 표준 분석방법인 Soil survey laboratory methods manual에 따라서 토양을 분석하여 Laboratory data sheets를 작성하였다. 제주통은 oxalate 침출성 (Al + 1/2 Fe) 함량이 1.3~2.1%, 인산보유능이 65.3~72.2%, 용적밀도가 0.99~1.27 Mg $m^{-3}$으로 andic 토양 특성을 보유하고 있지 않으므로 Andisols로 분류할 수 없다. 반면에 22~150 cm 깊이에서 argillic층을 보유하고 있으며, 전 토층에서 염기포화도 (양이온 합)가 35% 미만으로 낮기 때문에 Ultisols로 분류되어야 한다. 제주통은 argillic층의 상부 15 cm 깊이에서의 유기탄소 함량이 0.9% 이상이므로 Humults 아목으로 분류될 수 있다. 또한 기준깊이에서 fragipan, kandic층, sombric층, plinthite 등을 보유하지 않으며, Haplohumults의 분류기준을 충족시키고 있다. 제주통은 무기질 토양 표면에서 75 cm 이내 깊이에서 세토의 용적밀도가 1.0 Mg $m^{-3}$ 이하이고, oxalate 침출성 (Al + 1/2 Fe) 함량이 1.0% 이상인 토층의 두께가 18 cm 이상이므로 Andic Haplohumults로 분류할 수 있다. 토성속 제어부위에서의 점토함량이 35% 이상이고, thermic 토양온도상을 보유하므로 제주통은 Ashy, thermic family of Typic Hapludands가 아니라 Fine, mixed, themic family of Andic Haplohumults로 분류되어야 한다. 비교적 건조한 제주도 서부 및 북부 해안지방에는 non-Andisols 토양이 주로 생성 발달되고, 보다 습윤한 그 외의 지역에서는 알로판 또는 Al-유기복합체가 주가 되는 Andisols 토양이 주로 생성 발달한다. 제주도 서부와 북부 지역에서 해발이 높아짐에 따라 온도가 낮아지고 강우량이 많아져 증발산량이 감소되기 때문에 Andisols이 생성되기 시작한다. 제주도 북부 중산간 지역의 용암류대지에 분포하는 제주통은 Andisols이 아니라 Ultisols로 생성 발달되고 있다. 그러나 non-Andisols 토양에서 Andisols 토양이 분포하는 전이 지대에 분포하고 있어서 Andisols로 분류되지는 않으나 그 특성을 많이 보유하고 있는 Ultisols의 Andic 아군으로 발달되고 있다. Andisols로 생성 발달되지 않은 제주통은 안정한 지형인 용암류 대지에 분포하고 있으므로 토양이 거의 침식되지 않고 충적물이 별로 퇴적되지 않기 때문에 오랫동안 토양수의 하향이동에 따른 점토 집적작용과 염기용탈작용을 받게 된다. 그 결과 점토집적층인 argillic 층이 생성되고, 기준깊이에서의 염기포화도 (양이온 합)가 35% 미만인 강산성 토양인 Ultisols로 생성발달한 것이라고 생각된다.
Ti and Ti-alloys have good biocompatibility, appropriate mechanical properties and excellent corrosion resistance. However, the widely used Ti-6Al-4V is found to release toxic ions (Al and V) into the body, leading to undesirable long-term effects. Ti-6Al-4V has much higher elastic modulus (100 GPa) than cortical bone (20 GPa). Therefore, titanium alloys with low elastic modulus have been developed as biomaterials to minimize stress shielding. The electrochemical behavior of surface-modified and MC3T3-E1 cell-cultured Ti-30(Nb,Ta) alloys with low elastic modulus have been investigated using various electrochemical methods. Surfaces of test samples were treated as follows: $0.3{\mu}m$ polished; $25{\mu}m$, $50{\mu}m$ and $125{\mu}m$ sandblasted. Specimen surfaces were cultured with MC3T3-E1 cells for 2 days. Average surface roughness ($R_a$) and morphology of specimens were determined using a surface profilometer, OM, and FE-SEM. Corrosion behavior was investigated using a potentiostat(EG&G PARSTAT 2273), and electrochemical impedance spectroscopy was performed (10 mHz to 100 kHz) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The microstructures of the Ti-30(Ta,Nb) alloys had a needle-like appearance. The $R_a$ of polished Ti-30Ta and Ti-30Nb alloys was lower than that of the sandblasted Ti alloy. Cultured cells displayed round shapes. For polished alloy samples, cells were well-cultured on all surfaces compared to sandblasted alloy samples. In sandblasted and cell-cultured Ti-30(Nb,Ta) alloy, the pitting potential decreased and passive current density increased as $R_a$ increased. Anodic polarization curves of cell-cultured Ti alloys showed unstable behavior in the passive region compared to non-cell-cultured alloys. From impedance tests of sandblasted and cell-cultured alloys, the polarization resistance decreased as $R_a$ increased, whereas, $R_a$ for cell-cultured Ti alloys increased compared to non-cell-cultured Ti alloys.
고대건축에 있어 중요부재로 사용되었던 전돌은 의장이 화려하고 섬세하여 통일신라시대에는 당${\cdot}$일본의 수준을 훨씬 능가하였다. 이 중 녹유전은 그 사용례가 특별한 건축물에 한정하여 사용하였으며 남겨진 자료 또한 소량일 뿐만 아니라, 현재까계 녹유전과 관련된 연구는 거의 이루어지지 않고 있어 분석을 시도하여 보았다. 조사된 녹유전은 통일신라시대의 가장 대표적인 포항 법광사지 출토 녹유전이다. 녹유전의 성분분석은 미소부X선회절분석기, 유도결합플라르마발광분석기, 미소부형광X선분석기, 열중량/시차별분석기/열이온화질량분석기의 방법으로 이루어졌다. 현미경관찰 결과, 단면구조는 대부분이 석영, 장석이며 주변에서 쉽게 관찰할 수 있는 보통의 점토입자로 구성되어 있었다. 태토의 성분 분석예는 거의 없음으로 기존에 조사 발표된 경주 및 장도 출토 토기와 비교하여 시 Al2O3와 Fe2O3가 조금 낮고 SiO2 성분이 더 높게 분석되었다. 또한 녹유의 성분분석 결과, PbO $70.2wt\%$를 함유한 순수한 납 유리질이었다. 전돌의 소성온도는 TG/DTA를 통해 $573^{\circ}C$에서의 흡열피크$(\alpha-quartz\rightarrow\beta-quartz)$와 $870^{\circ}C$에서 석영의 상전이$(\beta-quartz{\rightarrow}tridymite)$에 따른 발열피크가 관찰되었다. 이는 $900^{\circ}C$ 이전에는 특이한 열적 변화가 없고 이 온도 범위 이상에서 변화가 일어났다는 것을 의미하므로 $900^{\circ}C$ 이하에서 소성된 것이라 사료된다. XRD를 이용한 광물분석에서는 전형적인 점토광물인 quartz와 feldspar, muscovite peak가 동정되고, 고온 소성시 보여지는 tridymite, mullite와 cristobalite peak가 동정되지 않은 것으로 석영의 결정구조 변화에 따른 소성온도 추정으로 보아 $900^{\circ}C$ 이하의 저온소성으로 볼 수 있다. 전돌 녹유의 납동위원소비 분석결과는 한국중남-남부광산연과 일치하고 있으며, 따라서 포항 법광사지의 녹유전돌의 제작산지는 한반도 남부의 원료를 사용하여 제작했음을 추정할 수 있다.
Journal of Korean Society for Atmospheric Environment
/
제17권E1호
/
pp.1-7
/
2001
The elemental characteristics of atmospheric aerosols were investigated as a function of particle size and water solubility. The aerosol particles were samples at 12 individual size ranges between 0.01 and 30㎛. Collected aerosol particles were separated into both soluble and insoluble components. The concentrations of 15 elements in both components were determined by a PIXE analysis using a 2.0 MeV-proton beam. In general, the mass size distribution of particulate matter was represented as a bimodal distribution. The maximum rations of S in July and December were 5.5 and 3.8 %, and they appeared in the size range of 0.47∼1.17㎛(stage No. 6 or 7) . The ratios of a S at non-separated size were 3.1 and 2.2 % in July and December, respectively, On the other hand, the maximum rations of Si in July and December were 7.0 and 5.4% and they appeared in the size range of 5.1∼30㎛(stage No. 0∼2). The ratios of Si at the non-separated size were 2.1 and 1.8% in July and December, respectively, The mass diameter of 12 elements ranged between 0.59㎛ of S and 3.20 of Fe. More than 90% of atmospheric aerosols consisted of the light elements such as C, N, O, H and Al. The soluble component was dominant in the smaller size range and the insoluble component in the larger size range. Large portions of Si. Ti and Fe existed in insoluble state. By contrast, S, Cl, Ca, Zn and Br were dissolved in water.
Hexagonal barium-ferrite ($BaFe_{12}O_{19}$, magnetoplumbite structure; BaM) film with perpendicularly c-axis orientation was successfully deposited on (100) silicon substrates with an MgO (111) underlayer by rf diode sputtering and in-situ heating at $920^{\circ}C$. The magnetic and structural properties of 0.27 ${\mu}m$ thick BaM films on MgO (111) underlayers were compared to films of the same thickness deposited onto single-crystal MgO (111) and c-plane ($000{\ell}$) sapphire ($Al_2O_3$) substrates by vibrating sample magnetometry (VSM), x-ray diffractometer (XRD), and atomic force microscopy (AFM). The thickness dependence of MgO (111) underlayers on silicon wafer was found to have a large effect on both magnetic and structural properties of the BaM film. The thickness of 15 nm MgO (111) underlayers produced BaM films with almost identical magnetic and structural properties as the single-crystal substrates; this can be explained by the lower surface roughness for thinner underlayer thicknesses. The magnetization saturation ($M_s$) and the ratio $H_{cII}/H_{c{\bot}}$ for the BaM film with a 15 nm MgO (111) underlayer is 217 emu/cc and 0.24, respectively. This is similar to the results for the BaM films deposited on the single-crystal MgO (111) and sapphire substrates of 197 emu/cc and 0.10, 200 emu/cc and 0.12, respectively. Therefore, the proposed MgO (111) underlayer can be used in many applications to promote c-axis orientation without the cost of expensive substrates.
리튬이온전지의 대형화와 범용화에 따라 경제성과 안정성 관점에서 정극재료의 개발은 중요한 과제로 대두되고 있다. 18650 원통형 전지의 에너지 밀도는 발매 초기인 1991년 230Wh/l에서 2005년 2배 이상의 500Wh/l로 증가하였으며, 제품 대부분의 에너지용량은 450~500 Wh/l, 150~190Wh/kg이고 안전성, 제조비 절감 및 장 수명을 중점적으로 개발하고 있다. $LiCoO_2$ 정극활물질 중의 Co가 고가이므로 Co 사용량을 줄이면서 에너지 용량을 향상시키기 위하여 $LiMn_2O_4$, $LiCo_{1/3}N_{i1/3}Mn_{1/3}O_2$, $LiNi_{0.8}Co_{0.15}Al_{0.05}O_2$, $LiFePO_4$-C복합체 (167 mA/g)등이 개발되고 있다. 전동자전거용 전지는 출력밀도 500 Wh/kg, 전동공구용 1,500Wh/kg, EV나 PHEV용으로는 4,000~5,000Wh/kg의 대용량 출력밀도를 요구하고 있으므로 배터리 소재의 성능을 향상시키려고 많은 연구가 진행되고 있다. 최근 Graphene-sulfur 복합체정극활물질 600 Ah/kg, 2차전지용 분자클러스터(molecular cluster) 320 Ah/kg 등의 새로운 정극활물질이 연구 개발되고 있으므로 실용화가 기대된다.
Jang, Jeonghun;Park, Nayun;Lee, Donghoon;Choi, Seyeong;Park, Junhong;Park, Man
한국토양비료학회지
/
제49권6호
/
pp.813-818
/
2016
Distribution of clay minerals separated from clay fraction of corn fields in Korea has been investigated along with their characterization. Crystalline phases of the clay minerals were identified by powder X-ray diffraction (XRD) pattern, and their relative chemical compositions were analyzed by X-ray fluorescence spectrometry (XRF). The soils were found to have pH 6.4, organic matter $37.2g\;kg^{-1}$, available $P_2O_5$$599mg\;kg^{-1}$, respectively, and exchangeable K, Ca and Mg were 1.2, 7.3 and $1.8cmol_c\;kg^{-1}$, respectively. Major primary minerals consisted mainly of quartz and mica, and kaolinite and chlorite were identified as major secondary clay minerals. For most of soils, mica phase was identified to be muscovite rather than biotite. The average contents of $SiO_2$, $Al_2O_3$ and $Fe_2O_3$ were 43.7, 23.6 and 8.8%, respectively, although they were different with the locations.
양남 지역의 제 3 기층인 하서리 응회암층의 중.상부에 부존되는 벤토나이트들은 원암의 암상과 화학조성에 의존되는 광호 양상과 광물상을 나타낸다. 벤톤나이트들은 대부분 안산암질 원암의 기원을 시사하는 희유 및 희토류 원소들의 함유 양상을 보이고, 현무암질 원암의 벤토나이트는 최상부의 일부 층준에만 그 산출이 국한된다. 이 지역의 벤토나이트는 주로 유리질 내지 라필리 응회암이 속성 변질된 것으로 이 과정에서 SiO2와 알칼리 (Na, K) 성분들이 고갈되는 화학 성분상의 유동 양상이 인지된다. 벤토나이트는 주된 광물 성분인 스멕타이트 이외에 흔히 단백석 및 석영같은 규산 광물과 휼란다이트, 모데나이트 및 클리높틸로라이트간은 불석광물들을 수반한다. 스멕타이트는 대부분 몰노릴로나이트 유형이지만 최상부 층준의 현무암질원 벤토나이트와 비교하여 논트로나이트의 광물 화학, X-선회절 양상, 층간 화학 및 염화학적 특성 등이 논의되었다. 이 지역 벤토나이트의 형성과정은 (1) 화산쇄설물의 급속한 퇴적, (2) 비이상적으로 높은 매몰 온도(<8$0^{\circ}C$) 조건, (3) 규산 광물의침전에 의한 공극수 내외 H4SiO4의 제거, (4) 원암의 낮은 Si/al 함유비와 높은 Fe 함유도 등에 의해서 조장된 것으로 해석된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.