• 한국세라믹학회지
• /
• 제34권7호
• /
• pp.738-746
• /
• 1997

MgO clinker and two kinds of dolomite clinkers with different microstructures and CaO contents were used as starting materials, and the effects of Fe2O3 addition on the properties of MgO and dolomite were investigated in the range of 2 to 8 wt% of Fe2O3 content. Secondary phases contributed to densification of MgO-Fe2O3 and dolomite-Fe2O3 were magnesioferrite and dicalciumferrite, respectively. Sinterabilities of MgO-Fe2O3 and dolomite-Fe2O3 were directly proportional to the amount of secondary phases. Also, sinterability of dolomite itself was dependent on the microstructure of starting material including distribution of CaO and MgO as well as the addition amount of Fe2O3. The flexural strength of MgO-Fe2O3 content was almost constant. The hydration resistance of dolomite with large size of MgO and discontinuous distribution of CaO was higher than that of dolomite with small size of MgO and continuous distribution of CaO. Also, the minimum content of Fe2O3 to prevent they hydration of dolomite was about 4wt%. As increasing Fe2O3 content, the penetration resistance of MgO-Fe2O3 was improved by the increment of magnesioferrite. On the other hand, the penetration resistance of dolomite-Fe2O3 was decreased because of the increment of dicalciumferrite having low melting point.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.40-42
• /
• 2002

TiO$_2$/Fe$_2$O$_3$composite thin films were prepared on common glass substrates by sol-gel processing and dip-drawing method. The effect of Fe$_2$O$_3$content on the photocatalytic and hydrophilic properties of composite films was studied. The results indicate that the photocatalytic activities of composite TiO$_2$films are superior to that of pure TiO$_2$film, and the film containing 0.5% Fe$_2$O$_3$has the best photocatalytic activity. The hydrophilicity is difference with variant Fe$_2$O$_3$content, the films containing 0.05% ~0.1% Fe$_2$O$_3$have the best hydrophilicity and their contact angles are 0。.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.526-531
• /
• 2007

The sintering behavior and electrical property of $Ce_{0.8}Gd_{0.2}O_{1.9}$ ceramics were investigated with the iron oxide concentration ranging from 0 to 5 mol%. Both the sintered density and grain size were found to increase up to 2 mol% $Fe_2O_3$, and then to decrease with further additions. At a higher $Fe_2O_3$ content above 3 mol%, grain size decreased by a pinning effect induced by different shape grains. The electrical conductivity was also increased with increasing $Fe_2O_3$ content up to 2 mol%. Total conductivity of 2 mol% $Fe_2O_3-added$ specimen showed the maximum conductivity of $2{\times}10^{-2}{\Omega}{\cdot}cm^{-1}$ at $500^{\circ}C$. The addition of $Fe_2O_3$ was found to promote the sintering properties and electrical conductivities of $Gd_2O_3-dope\;CeO_2$.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.311-315
• /
• 2017

The perovskite system $(Ba^{2+}{_{1-x}}La^{3+}{_x})Fe^{3+}{_{1-t}}Fe^{4+}{_t}O_{3-y}$ (y = (1 - x --t)/2) having a composition of x = 0.0, 0.1, 0.2, and 0.3 showedean increase in $Fe^{4+}$ mole ratios with an increase in oxygen partial pressure ($N_2{\rightarrow}air{\rightarrow}O_2$), and with an increasefin s, the $Fe^{3+}$ quantity decreased and oxygen content (3-y value) increased. For each N sampls heat-treated in $N_2$ gas, a considerable weight gain, i.e.g a steadynincrease if oxygen content, was observed in the TGA data on the cooling process. The conductivity values at a constant temperature were in the order of $N_2$$O_2$; the respective log ${\sigma}$ values (${\Omega}^{-1}{\cdot}cm^{-1}$) at 323 K of the BL0 sample were -5.75 (BL0-N), -3.39 (BL0-A), and -0.53 (BL0-O). The mixed valencies of $Fe^{3+}$ and $Fe^{4+}$ ions in each sample were also confirmed by both the oxidation curve above 350 mV and the cathodic reduction curve below 200 mV from cyclic voltammetry.

• 한국자기학회지
• /
• 제5권3호
• /
• pp.191-196
• /
• 1995

고상반응법에 의해 NiCuZn ferrite를 제조하였으며 소결온도 $900^{\circ}C$에서의 조성 및 공정변화에 따른 특성을 검토하였다. NiCuZn ferrite에서 Cu 치환 첨가량과 (Ni+Cu)/Zn의 조성비를 변화시킨 결과 ${(Ni_{0.2}Cu_{0.2}Zn_{0.6}O)}_{1.02}{(Fe_{2}O_{3})}_{0.98}$의 조성을 가질 때 초기투자율이 가장 높게 나타났다. NiCuZn ferrite의 Curie 온도 ($T_{c}$)는 Cu의 치환 첨가량이 증가함에 따라 점차 감소하였으며, Cu의 함량을 고정하고 Ni의 함량을 변화시킬 경우, (Ni+Cu)/Zn의 조성비가 증가할 수록 현저하게 증가하였다. ${(Ni_{0.2}Cu_{0.2}Zn_{0.6}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$의 조성에서 분쇄시간을 20~80시간으로 변화시켰을 경우 $Fe_{2}O_{3}$ 결핍량(w)이 -0.015일 때 초기투자율이 가장 높았으며, Curie 온도 ($T_{c}$)는 $Fe_{2}O_{3}$ 결핍량(w)이 0에서 -0.025로 증가할 수록 점차 감소하였다.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.962-966
• /
• 1993

Effect of Fe content on the electrical properties of Zn2Y (Ba2Zn2Fe12O22) was studied by investigating X-ray diffraction patterns, microstructure and resistivity of samples. When x(Ba2Zn2Fe12＋xO$\delta$) is between ＋1 and -1, Zn2Y single phase was obtained and electrical resistivity was inversely proportional to Fe content. The possible defect model of Zn2Y was proposed based on the observation. When x<-1 or x>1, second phase(ZnFe2O4 for x<-1, ZnFe2O4 and Ba3Zn3Fe24O41 for x>1) were observed and the electrical resistivity was inversely proportional to the sample density. The activation energy of electrical conductivity of the stoichiometric Zn2Y was 0.49eV below 20$0^{\circ}C$ and 0.07eV above 50$0^{\circ}C$.

• 한국작물학회지
• /
• 제28권2호
• /
• pp.267-271
• /
• 1983

생약식물로서 중요한 위치를 차지하고 있는 구기의 육종자료를 얻고자 한국에 분포되어 있는 구기 지방종을 수집하여 품질의 특성을 조사한 결과를 요약하면 다음과 같다. 1. 품질에서는 남부 지방종들이 단백질, 조지방, Oleic acid, Linoleic acid, Vitamin A, Alcaloid 함량이 많아 우수하였다. 2. 무기성분인 Ca, P, Fe의 함량도 남부 지방종이 높은 경향이었다. 3. 구기엽의 분석에서 $N,\;P_2O_5,\;K$의 함량은 경하부에 착생한 광엽이 경상부에 착생한 세엽에 비하여 낮은 반면에 Ca, Mg, Fe, $SiO_2$등은 광엽에서 높았다. 4. 구기엽의 엽색변화 시기에 따른 성분함량은 $N,\;P_2O_5,\;K$는 제1차 광엽기에, Ca은 제1차 낙엽기에 Mn과 Cu은 각각 제2차 신엽에서 높은 경향을 보였다.

• 센서학회지
• /
• 제10권4호
• /
• pp.222-231
• /
• 2001

$SnO_2$의 물성을 $Fe_2O_3$ 첨가량, 산소분압, CO 기체농도, 그리고 온도의 함수로서 관찰하였다. 시편은 후막인쇄 기법으로 알루미나 기판 위에 제조하였다. $700^{\circ}C$/6h 소성한 시편들의 $Fe_2O_3$첨가량에 따른 미세구조와 입자분포의 차이는 거의 없었다. $Fe_2O_3$를 첨가하지 않은 $SnO_2$의 전기적 성질은 소성온도가 낮은 경우와 산소분압이 낮은 경우에 전도성이 높게 측정되었다. $Fe_2O_3$를 첨가한 $SnO_2$의 전도성은 측정온도 증가로 증가하지만 $Fe_2O_3$ 첨가량 증가로 전도성은 감소하였다. 산소분압 의존성은 $Fe_2O_3$ 첨가로 감소하였다. CO 가스에 대한 기체 센서 특성 중 감도는 $350^{\circ}C$, 0.1 mol% $Fe_2O_3$를 첨가한 경우에 가장 높았고, 재현성 및 응답성도 양호하게 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.467-469
• /
• 2005

The purpose of this study was to investigate main ingredients of Hwangtoh (Korean yellow ochre), especially ferric oxide $(Fe_{2}O_{3})$ content. In this study, X-ray fluorescence spectrophotometry was employed to analyze the ingredients of Hwangtoh. The ferric oxide $(Fe_{2}O_{3})$ contents of Hwangtoh from Hwa Sun, Ham An, Chil Gok, Sun Chun, Ha Dong, San Chung, Go Chang, Kim Che and Jeong Eup were 1.5, 5.66, 11.76, 6.63, 2.74, 11.4, 4.84, 7.21 and 6.23%, respectively. Based on the above results, any Hwangtoh sample didn't meet the ferric oxide $(Fe_{2}O_{3})$ content criterion.

• 한국세라믹학회지
• /
• 제31권6호
• /
• pp.629-636
• /
• 1994

The ferrimagnetic glass-ceramics in the system Fe2O3-CaO-SiO2 for hyperthermia were investigated. Glasses could be prepared up to the content of 40 wt% of Fe2O3 and below the weight ratio of 1.0 of CaO/SiO2. The maximum saturation magnetization and the maximum coercive force were 29.85 emu/g and 340.1 Oe respectively, for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. And for a glass 40Fe2O3.30CaO.30SiO2 composition the maximum saturation magnetization and the maximum coercive force were 18.47 emu/g and 374.4 Oe heat-treated at 1,00$0^{\circ}C$ and 90$0^{\circ}C$ for 8 hours respectively. The maximum hysteresis loss was 1,726.3 cal/g for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. It was found that the ferrimagnetic Fe2O3.CaO.SiO2 glass-ceramics was little injurious to human body as results of biocompatibility test and biotoxicity test.