• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.136-137
• /
• 2007

LCD 패널의 전기전도에 대한 물량여부를 측정하기 위한 프르브 유니트의 핵심소자 중 하나인 블레이드 타입의 핀을 제작하는데 있어서 주 소재인 베릴륨니켈 박판의 식각 조건에 대하여 연구하였다. 사용된 베릴륨니켈 기판의 두께는 $20{\mu}m$이며, DFR을 이용하여 패터닝하였고 염화제이철 및 황산을 첨가한 용액을 이용하여 침전법으로 단면 식각을 실시하였다. 베릴륨니켈 박판은 2mol의 염화제이철에 1mol의 황산을 첨가한 용액으로 $40^{\circ}C$의 온도에서 식각하였을때 가장 빠른 식각을 보였으며, 그에 따라 식각된 면의 상태도 매우 깨끗하고 수직 가까운 식각면이 나타남을 알 수 있었다.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.344-348
• /
• 2009

The electrolyte effects of the electroplating solution in Cu films grown by ElectroPlating Deposition(EPD) were investigated. The electroplated Cu films were deposited on the Cu(20 nm)/Ti (20 nm)/p-type Si(100) substrate. Potentiostatic electrodeposition was carried out using three terminal methods: 1) an Ag/AgCl reference electrode, 2) a platinum plate as a counter electrode, and 3) a seed layer as a working electrode. In this study, we changed the concentration of a plating electrolyte that was composed of $CuSO_4$, $H_2SO_4$ and HCl. The resistivity was measured with a four-point probe and the material properties were investigated by using XRD(X-ray Diffraction), an AFM(Atomic Force Microscope), a FE-SEM(Field Emission Scanning Electron Microscope) and an XPS(X-ray Photoelectron Spectroscopy). From the results, we concluded that the increase of the concentration of electrolytes led to the increase of the film density and the decrease of the electrical resistivity of the electroplated Cu film.

• 한국식품영양과학회지
• /
• 제29권5호
• /
• pp.943-947
• /
• 2000

The purpose of this study was to investigate the extraction method of phenolic compounds from Rubus coreanum and antioxidative activity. antioxidative activities of Rubus coreanum were tested with ability of donating hydrogen to DPPH, and HPLC, fluorometry which measure the amount of MDA after reacting linoleic acid with $H_2O$$_2$, and LDL with $H_2O$$_2$ and FeCl$_2$. The most suitable extraction conditions of the phenolic compounds from Rubus coreanum was 3 times with 60% ethanol, and the yield of extract containing 35% moisture was 15.28%. In extraction efficacy of phenolic compounds, 60% ethanol was superior to water as extraction solvent, and extraction efficacy with 60% ethanol did not differ from disolving by water after evaporation of 60% ethanol extract. 60% ethanol extract of Rubus coreanum had an ability of hydrogen donating to DPPH, MDA determination showed the antioxidative effect with inhibition ratio of 77.91% on linoleic acid oxidation by addition of Rubus coreanum extract with the concentration of 1.500 ppm. and about 65.74% of LDL oxidation was inhibited by addition of 1,000 ppm.

• Bulletin of the Korean Chemical Society
• /
• 제11권1호
• /
• pp.11-15
• /
• 1990

The temperature dependence of electrical conductivities and thermoelectric power of $I_2$-doped poly(1,4-penylene vinylene-co-2,5-dimethoxy-1,4-phenylene vinylene)s [poly(PV-co-DMPV)] and poly(1,4-phenylene vinylene-co-2,5-thienylene vinylene)s [poly(PV-co-TV)] were studied. The former copolymers were also doped with $FeCl_3$. All the samples used were in thin film forms. The temperature dependence of electrical conductivity implies that the variable range hopping conduction mechanism applises to these systems. The activation energy for the electrical conduction in dimethoxy-phenylene vinylene (DMPV) copolymers ranged from about 7 to 30 meV depending on the polymer composition and the nature of the dopant. It was significantly higher for $I_2$-doped thienylene vinylene (TV) copolymers, namely 90-200 meV. The values of the room temperature thermoelectric power were $30-70{\mu}V/K$ for DMPV copolymer and $100-800{\mu}V/K$ for TV copolymers. Anisotropy in the electrical conductivities was also studied for oriented films obtained by uniaxial stretching of the precursor polymer films.

• Corrosion Science and Technology
• /
• 제20권4호
• /
• pp.175-182
• /
• 2021

Magnesium alloy is limited in the industrial field because its standard electrode potential is -2.363 V vs. NHE (Normal Hydrogen Electrode) at 25 ℃. This high electrochemical activity causes magnesium to quickly corrode with oxygen in air; chemical conversion coating prevents corrosion but causes surface defects like cracks and pores. We have examined the anti-corrosion effect of sol-gel coating sealed on the defected conversion coating layer. Sol-gel coatings produced higher voltage current and smaller pore than the chemical conversion coating layer. The conversion coating on magnesium alloy AZ31 was prepared using phosphate-permanganate solution. The sol-gel coating was designed using trimethoxymethylsilane (MTMS) and (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) as precursors, and aluminum acetylacetonate as a ring-opening agent. The thermal shock resistance was tested by exposing specimens at 140 ℃ in a convection oven; the results showed changes in the magnesium alloy AZ31 surface, such as oxidization and cracking. Scanning electron microscope (FE-SEM) analysis confirmed a sealed sol-gel coating layer on magnesium alloy AZ31. Electrochemical impedance spectroscopy (EIS) measured the differences in corrosion protection properties by sol-gel and conversion coatings in 0.35 wt% NaCl solution, and the potentiodynamic polarization test and confirmed conversion coating with the sol-gel coating show significantly improved resistance by crack sealing.

• 한국식품영양학회지
• /
• 제32권5호
• /
• pp.417-424
• /
• 2019

The purpose of this study was to observe the effects of the polysaccharide (GLP) obtained from the liquid cultured Ganoderma lucidum on the lipidperoxidation in a rat liver microsome and hepatotoxicity in the primary cultured rat hepatocytes. It is well known that the polysaccharide of Ganoderma lucidum exhibits hepatoprotective activity, antitumor activity etc., which many suggest a relationship to lipidperoxidation. The effect of GLP on $CCl_4-$ and galactosamineintoxicated cytotoxicity in the primary cultured rat hepatocytes were reduced the GPT value. In order to the estimate the effects of anti-lipidperoxidation of the polysaccharide, enzymatic and nonenzymatic reaction assays were performed, in vitro, in the rat liver microsome. An enzymatic lipidperoxidation reaction by $ADP+FeCl_3+NADPH$ and $CCl_4+NADPH$, GLP (1 mg/mL) inhibited 77.4% and 39.4%, respectively, and the nonenzymatic reaction displayed a 97.4% strongly inhibition. In the enzymatic and nonenzymatic inducers treated with GLP, the formation of malondialdehyde (MDA) progressively decreased by raising the GLP concentration. These results suggest that the anti-lipidperoxidation and radical scavenging activity of GLP may play an important part in the liver protection action.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.37-38
• /
• 2022

During the past decades, the corrosion of the steel rebar embedded in concrete structure surrounding marine environment is actually problematic and required the suitable preventive method. An eco-friendly corrosion inhibitor mix is investigated to stifle the active corrosion in comparison with other commercial corrosion inhibitors. The hybrid inhibitor enhances the corrosion resistance and the workability of concrete. However, it reduces the compressive strength slightly after 28-day-age. The electrochemical studies and mechanical studies are pointed out the corrosion resistance property, corrosion kinetics, and the mechanical properties of all concrete samples. H-3 is the optimum dose of hybrid inhbitor that meets the demand of both electrochemical property and mechanical property. It performs the noble features due to the formation of optimum amount of P-Zwitterions-(Cl)-Fe complex onto the steel rebar surface.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• 한국환경농학회지
• /
• 제1권1호
• /
• pp.22-30
• /
• 1982

본 조사(本 調査)는 김해평야(金海平野)외 농업용수(農業用水)로 사용(使用)하고 있는 낙동강지류(洛東江支流)의 수질(水質)을 주요(主要) 양수장부근(揚水場附近) 6척지점(個地點)(대저, 식만, 봉림, 녹산, 마찰, 장유)에서 1981년(年) 5월(月), 7월(月) 및 10월(月)의 3회(回)에 걸쳐 채수분석(採水分析)함으로서 수질보전대책(水質保全對策)과 이 지역(地域)의 농업(農業)에 참고자료(參考資料)를 제공(提供)코자 하였다. 시기별(時期別) 각(各) 지점(地點)의 수온(水溫), 탁도(濁度), 증발잔류물(蒸發殘留物), pH, BOD, COD, DO, 경도(硬度), $Cl-,\;SO_4--,\;PO_4---,\;NH_4+,\;NO_3-,\;K+,\;Na+$, 일반세균(一般細菌), 대장균(大腸菌), 중금속(重金屬)(Cd, Pb, Cr, Fe, Zn)을 분석(分析)한 결과(結果)를 요약(要約)하면 다음과 같다. 1) 시기별(時期別) 모든 지점(地點)의 평균치(平均値)는 pH 7.8, BOD 6.3 ppm, COD 6.5 ppm, DO 6.4 ppm, 경도(硬度) 231 ppm, Cl- 582 ppm, $SO_4--\;412\;ppm,\;PO_4---\;2.32\;ppm,\;NH_4+$ 3.8 ppm, Na+ 478 ppm, 대장세균(大腸細菌) 2964개(個)/100ml, Cd 0.0040 ppm, Pb 0.006 ppm이었다. 2) 지점별(地點別) 오염도(汚染度)가 가장 높은 곳은 식만 양수장부근(揚水場附近)이었고 그 다음이 대저, 봉림, 녹산이었으며 비교적 오염도(汚染度)가 덜한 곳은 마찰, 장유양수장(揚水場) 부근(附近)이었다. 3) 오염도(汚染度)가 가장 높은 식만양수장(揚水場) 부근(附近)의 수질(水質)은 약간의 취기(臭氣)가 있을 뿐만 아니라 외관상(外觀上) 약간의 흑색(黑色)을 띄고 있었고, 분석평균치(分析平均値)는 pH가 8.0, BOD 8.1 ppm, COD 8.2ppm, DO 5.3ppm으로 농업용수기준(農業用水基準)의 한계(限界)에 도달(到達)하고 있었다. 이곳이 오염도(汚染度)가 높은 것은 김해시(金海市)의 주요(主要) 공장폐수(工場廢水)가 이곳으로 집중(集中) 배출(排出)되기 때문인 것으로 본다. 4) 시기별(時期別) 각(各) 성분(成分)의 차리(差異)는 뚜렷한 경향(傾向)이 없었으며 다만 DO가 10월(月)이 5월(月) 및 7월(月)보다 높게 나타났고 $NH_4+$는 10월(月)이 5월(月) 및 7월(月)에 비(比)해서 낮게 나타났을 뿐이다. 5) 각(各) 지점(地點)이 $NH_4+$함양(含量)이 높아 실소질비료(室素質肥料)의 시비(施肥)에 이를 고려(考慮)해야 할 것이며, Cl- 및 Na+함양(含量)은 평수시(平水時)에는 별문제(別問題)가 없을 것이나 갈수기(渴水期)에는 관개(灌漑)에 주의(注意)를 해야 할 것으로 본다.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.181-188
• /
• 2008

A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.