• 식물병연구
• /
• 제29권1호
• /
• pp.82-87
• /
• 2023

Exogenous ferrous chloride (FeCl₂) suppressed in vitro growth of Ralstonia pseudosolanacearum, causing bacteria for tomato bacterial wilt. More than 50 μM of FeCl₂ reduced the in vitro bacterial growth in dosedependent manners. Two to 200 μM of FeCl₂ did not affect the fresh weight of detached tomato leaves at 3 and 5 days after the petiole dipping without the bacterial inoculation. The bacterial wilt of the detached tomato leaves was evaluated by inoculating two different inoculum densities of R. pseudosolanacearum (10⁵ and 10⁷ cfu/ml) in the presence of FeCl₂. Bacterial wilt in the detached leaves by 10⁵ cfu/ml was efficiently attenuated by 10-200 μM of FeCl₂ at 3 and 5 days post-inoculation (dpi), but bacterial wilt by 10⁷ cfu/ml was only reduced by 200 μM of FeCl₂ at 3 and 5 dpi. These results suggest that iron nutrients can be included in the integrated disease management of tomato bacterial wilt.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.100-105
• /
• 2010

EPDM 소재를 공기 중, 수돗물, 3차 증류수, NaCl/$CaCl_2$ 혼합 수용액, $CaCl_2/FeCl_3$ 혼합 수용액에서 7일간 노화시켰다. 노화 온도는 $90^{\circ}C$였다. 공기와 3차 증류수에서 노화된 시험편은 백화가 발생하지 않았으나, 수돗물, NaCl/$CaCl_2$ 혼합 수용액, $CaCl_2/FeCl_3$ 혼합 수용액에서 노화된 시험편은 백화가 발생하였다. 백화 물질을 규명하기 위해 GC/MS를 이용하여 가용성 유기물을 분석하였으며, 영상 분석기와 SEM을 이용하여 표면 형태를 조사하였으며, EDX를 이용하여 표면 적층물의 원소 분석을 실행하였다. 백화의 주요 원인으로는 금속 이온과 지방산과의 반응에 의한 지방산 금속염의 형성을 들 수 있다.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.412-418
• /
• 2020

본 논문은 에칭액(FeCl₃)의 비중을 정확히 제어할 수 있는 자동 액 관리시스템을 제작하여 OLED에 적용되는 SUS MASK 제작하였다. 그리고 홀 직경을 0.4 mm로 목표치를 정하였다. 본 실혐 결과, FeCl₃의 비중(S.G) 값을 1.43에서 1.49까지 변화를 주었을때 에칭 속도는 빨라졌다. 그리고 비중이 1.49일 때, 홀직경이 0.405 mm로의 목표치에 접근한 것을 알 수가 있었다. 압력분사를 2.0 kg/cm2~3.5 kg/cm2까지 변화를 주었을 때 3.0 kg/cm2에서 홀 직경은 평균 0.4 mm로 목표치와 일치하였다. FeCl₃에 HCl과 H2O을 혼합하여 비중을 1.430으로 설정하고 분사 압력을 3.0 kg/cm2으로 고정시키고 첨가제를 1.2%로 적용하여 비중 변화에 따른 특성을 분석하였다. 비중을 1.460 ~ 1.469까지 변화주었을 때 비중이 증가할수록 에칭속도는 0.564에서 0.540으로 빨라졌다. 그리고 비중이 1.467일 때 홀 직경이 0.4 mm로 측정되어 목표치에 도달하였다.

• 공업화학
• /
• 제33권4호
• /
• pp.419-424
• /
• 2022

The oxidative degradation performance of the Erionyl Navy R dye was studied in this article. The investigation mainly focused on a comparative study between chemical oxidations by sodium hypochlorite (NaClO) and hydrogen peroxide (H₂O₂), and catalytic oxidations including the Fenton (Fe²⁺-H₂O₂) and Fenton-Like (Fe²⁺/ Fe³⁺/Co²⁺/ Mn²⁺-H₂O₂) or modified Fenton-like (Fe²⁺/ Fe³⁺ -NaClO) reactions. A discoloration and degradation of the Erionyl Navy R occurred after 30 minutes, which varies according to the oxidation system involved; 31%, 54%, <20%, 95%, and >96% losses were observed for Co²⁺-H₂O₂, Mn²⁺-H₂O₂, Fe²⁺-NaClO, Fe³⁺-NaClO), and Fe²⁺-H₂O₂ and Fe³⁺-H₂O₂, respectively.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.148-154
• /
• 2003

The addition of Ni leads to the formation of protective rust layer on steel and subsequently high corrosion resistance of steel in $Cl^-$-containing environment. $\alpha$-FeOOH, $\beta$-FeOOH, $\gamma$-FeOOH and $Fe_3O_4$ are formed mainly on steels exposed to $Cl^-$-containing environment. As the first work of this kind, this study reports the influence of Ni on the oxidation behavior of $Ni_xFe_{1-x}(OH)_2$ in $Cl^-$-containing solution at two different pH regions(condition I under which the solution pH is allowed to decrease and condition I under which solution pH is maintained at 8) where $\gamma$-FeOOH and $Fe_3O_4$ are predominantly formed, respectively, upon oxidation of $Fe(OH)_2$, In the presence of Ni(II) in the starting solution, the formation of $\beta$-FeOOH was facilitated and the formation of $\gamma$-FeOOH was suppressed with increasing Ni(II) content and with increasing oxidation rate of Fe(II). Ni(II) was found to have $Fe_3O_4$-suppressing effect under condition II.

• 자원리싸이클링
• /
• 제6권1호
• /
• pp.35-39
• /
• 1997

EAF Dust 중 염화물의 존재형태를 파악하고, 온도에 따른 휘발 거동과 제거에 관하여 알아보기 위해 실험을 하였다. 두시료의 화학성분은 더스트A의 경우 27.3%FE, 21.8%Zn, 3.15%Pb, 3.51%Cl이고 더스트B의 경우 33.92%FE, 15.94%Zn, 2.73%Pb, 3.98%Cl를 함유하다. EAF Dust 중 염화물의 존재형태를 X선회절분석과 수침출을 통해 분석한 결과 염화물의 존재형태는 NaCl, KCl, Ph(OH)Cl로서 주로 존재함을 알았다. 온도에 따른 Chlorine의 휘발율을 산화성분위기와 환원성분위기에서 살펴본 결과, 각각 110$0^{\circ}C$에서 1시간 유지하였을 경우 산화성분위기에서는 99%까지, 환원성분위기에서는 96%까지 휘발제거되었다.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.354-359
• /
• 2018

NaCl-induced hot corrosion behavior of ASTM T22 (Fe-2.25Cr-1Mo), T91 (Fe-9Cr-1Mo), T92 (Fe-9Cr-1.8W-0.5Mo), 347HFG (Fe-18-Cr-11Ni), and 310H (Fe-25Cr-19Ni) steels was studied after spraying NaCl on the surface. During corrosion at $600-800^{\circ}C$ for 50-100 h, thick, non-adherent, fragile, somewhat porous oxide scales formed. All the alloys corroded fast with large weight gains owing to fast scaling and destruction of protective oxide scales. Corrosion rates increased progressively as the corrosion temperature and time increased. Corrosion resistance increased in the order of T22, T91, T92, 347HFG, and 310H, suggesting that the alloying elements of Cr, Ni, and W beneficially improved the corrosion resistance of steels. Basically, Fe oxidized to $Fe_2O_3$, and Cr oxidized to $Cr_2O_3$, some of which further reacted with FeO to form $FeCr_2O_4$ or with NiO to form $NiCr_2O_4$.

• Carbon letters
• /
• 제13권1호
• /
• pp.44-47
• /
• 2012

We analyzed the effect of etchants for metal catalysts in terms of the characteristics of resulting graphene films, such as sheet resistance, hall mobility, transmittance, and carrier concentration. We found the residue of $FeCl_3$ etchant degraded the sheet resistance and mobility of graphene films. The residue was identified as an iron oxide containing a small amount of Cl through elemental analysis using X-ray photoelectron spectroscopy. To remove this residue, we provide an alternative etching solution by introducing acidic etching solutions and their combinations ($HNO_3$, HCl, $FeCl_3$ + HCl, and $FeCl_3+HNO_3$). The combination of $FeCl_3$ and acidic solutions (HCl and $HNO_3$) resulted in more enhanced electrical properties than pure etchants, which is attributed to the elimination of left over etching residue, and a small amount of amorphous carbon debris after the etching process.

• 한국분말재료학회지
• /
• 제6권4호
• /
• pp.294-300
• /
• 1999

This study was carried out to investigate the possibility whether Metal Injection Molding (MIM) process could be applied to 95wt.%W-3.5wt.%Ni-1.5wt.%Fe heavy alloy in order to obtain an intricate shape. Methylcellulose was used in the injection molding for binder. $FeCl_2-4H_2O$ was added in solvent substituting Fe powder and $FeCl_2$ was doped on W-Ni premixed powder. When $FeCl_2-4H_2O$ was added in solvent, the binder separation occurred for injection molding so that the matrix content was changed. Such problem was solved when $FeCl_2$ was doped. In this study. the debinding process did not affect residual carbon content. The sintered microsouctures as addition methods of Fe element and the sintering temperature from $1420^{\circ}C$ to $1470^{\circ}C$, which are around the temperature of liquid phase formation, were observed.

• 한국표면공학회지
• /
• 제28권2호
• /
• pp.101-109
• /
• 1995

Electroetching rates of $FeCl_3$ solution were increased according to increasing solution temperature. Activation energy of electroetching at Be'36 and 5A/$dm^2$ condition was 28.3Kcal and also, at Be'46 and 5A/dm$^2$ condition was 33.2Kcal. At Be'36 concentration of $FeCl_3$ solution, electroetching rate were more higher than at Be'46 concentration. Surfaces of etched grooves obtained at 8A/$dm^2$ or higher current density in 46 Be' concentration of $FeCl_3$ solution were observed to be flat and smooth owing to suppressing chemical etching reaction. Distinctly etched boundaries became to be appeared at 2A/$dm^2$ in Be'41 electroetching condition by differential effects. In case of applying 8A/$dm^2$ current density to Be'46 of $FeCl_3$ solution, etching depth were 4 times and side etching were 6 times more than chemical etching case respectively.