• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.136-137
• /
• 2007

LCD 패널의 전기전도에 대한 물량여부를 측정하기 위한 프르브 유니트의 핵심소자 중 하나인 블레이드 타입의 핀을 제작하는데 있어서 주 소재인 베릴륨니켈 박판의 식각 조건에 대하여 연구하였다. 사용된 베릴륨니켈 기판의 두께는 $20{\mu}m$이며, DFR을 이용하여 패터닝하였고 염화제이철 및 황산을 첨가한 용액을 이용하여 침전법으로 단면 식각을 실시하였다. 베릴륨니켈 박판은 2mol의 염화제이철에 1mol의 황산을 첨가한 용액으로 $40^{\circ}C$의 온도에서 식각하였을때 가장 빠른 식각을 보였으며, 그에 따라 식각된 면의 상태도 매우 깨끗하고 수직 가까운 식각면이 나타남을 알 수 있었다.

• Korean Journal of Materials Research
• /
• v.19 no.6
• /
• pp.344-348
• /
• 2009

The electrolyte effects of the electroplating solution in Cu films grown by ElectroPlating Deposition(EPD) were investigated. The electroplated Cu films were deposited on the Cu(20 nm)/Ti (20 nm)/p-type Si(100) substrate. Potentiostatic electrodeposition was carried out using three terminal methods: 1) an Ag/AgCl reference electrode, 2) a platinum plate as a counter electrode, and 3) a seed layer as a working electrode. In this study, we changed the concentration of a plating electrolyte that was composed of $CuSO_4$, $H_2SO_4$ and HCl. The resistivity was measured with a four-point probe and the material properties were investigated by using XRD(X-ray Diffraction), an AFM(Atomic Force Microscope), a FE-SEM(Field Emission Scanning Electron Microscope) and an XPS(X-ray Photoelectron Spectroscopy). From the results, we concluded that the increase of the concentration of electrolytes led to the increase of the film density and the decrease of the electrical resistivity of the electroplated Cu film.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.943-947
• /
• 2000

The purpose of this study was to investigate the extraction method of phenolic compounds from Rubus coreanum and antioxidative activity. antioxidative activities of Rubus coreanum were tested with ability of donating hydrogen to DPPH, and HPLC, fluorometry which measure the amount of MDA after reacting linoleic acid with $H_2O$$_2$, and LDL with $H_2O$$_2$ and FeCl$_2$. The most suitable extraction conditions of the phenolic compounds from Rubus coreanum was 3 times with 60% ethanol, and the yield of extract containing 35% moisture was 15.28%. In extraction efficacy of phenolic compounds, 60% ethanol was superior to water as extraction solvent, and extraction efficacy with 60% ethanol did not differ from disolving by water after evaporation of 60% ethanol extract. 60% ethanol extract of Rubus coreanum had an ability of hydrogen donating to DPPH, MDA determination showed the antioxidative effect with inhibition ratio of 77.91% on linoleic acid oxidation by addition of Rubus coreanum extract with the concentration of 1.500 ppm. and about 65.74% of LDL oxidation was inhibited by addition of 1,000 ppm.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.11-15
• /
• 1990

The temperature dependence of electrical conductivities and thermoelectric power of $I_2$-doped poly(1,4-penylene vinylene-co-2,5-dimethoxy-1,4-phenylene vinylene)s [poly(PV-co-DMPV)] and poly(1,4-phenylene vinylene-co-2,5-thienylene vinylene)s [poly(PV-co-TV)] were studied. The former copolymers were also doped with $FeCl_3$. All the samples used were in thin film forms. The temperature dependence of electrical conductivity implies that the variable range hopping conduction mechanism applises to these systems. The activation energy for the electrical conduction in dimethoxy-phenylene vinylene (DMPV) copolymers ranged from about 7 to 30 meV depending on the polymer composition and the nature of the dopant. It was significantly higher for $I_2$-doped thienylene vinylene (TV) copolymers, namely 90-200 meV. The values of the room temperature thermoelectric power were $30-70{\mu}V/K$ for DMPV copolymer and $100-800{\mu}V/K$ for TV copolymers. Anisotropy in the electrical conductivities was also studied for oriented films obtained by uniaxial stretching of the precursor polymer films.

• Corrosion Science and Technology
• /
• v.20 no.4
• /
• pp.175-182
• /
• 2021

Magnesium alloy is limited in the industrial field because its standard electrode potential is -2.363 V vs. NHE (Normal Hydrogen Electrode) at 25 ℃. This high electrochemical activity causes magnesium to quickly corrode with oxygen in air; chemical conversion coating prevents corrosion but causes surface defects like cracks and pores. We have examined the anti-corrosion effect of sol-gel coating sealed on the defected conversion coating layer. Sol-gel coatings produced higher voltage current and smaller pore than the chemical conversion coating layer. The conversion coating on magnesium alloy AZ31 was prepared using phosphate-permanganate solution. The sol-gel coating was designed using trimethoxymethylsilane (MTMS) and (3-Glycidyloxypropyl) trimethoxysilane (GPTMS) as precursors, and aluminum acetylacetonate as a ring-opening agent. The thermal shock resistance was tested by exposing specimens at 140 ℃ in a convection oven; the results showed changes in the magnesium alloy AZ31 surface, such as oxidization and cracking. Scanning electron microscope (FE-SEM) analysis confirmed a sealed sol-gel coating layer on magnesium alloy AZ31. Electrochemical impedance spectroscopy (EIS) measured the differences in corrosion protection properties by sol-gel and conversion coatings in 0.35 wt% NaCl solution, and the potentiodynamic polarization test and confirmed conversion coating with the sol-gel coating show significantly improved resistance by crack sealing.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.5
• /
• pp.417-424
• /
• 2019

The purpose of this study was to observe the effects of the polysaccharide (GLP) obtained from the liquid cultured Ganoderma lucidum on the lipidperoxidation in a rat liver microsome and hepatotoxicity in the primary cultured rat hepatocytes. It is well known that the polysaccharide of Ganoderma lucidum exhibits hepatoprotective activity, antitumor activity etc., which many suggest a relationship to lipidperoxidation. The effect of GLP on $CCl_4-$ and galactosamineintoxicated cytotoxicity in the primary cultured rat hepatocytes were reduced the GPT value. In order to the estimate the effects of anti-lipidperoxidation of the polysaccharide, enzymatic and nonenzymatic reaction assays were performed, in vitro, in the rat liver microsome. An enzymatic lipidperoxidation reaction by $ADP+FeCl_3+NADPH$ and $CCl_4+NADPH$, GLP (1 mg/mL) inhibited 77.4% and 39.4%, respectively, and the nonenzymatic reaction displayed a 97.4% strongly inhibition. In the enzymatic and nonenzymatic inducers treated with GLP, the formation of malondialdehyde (MDA) progressively decreased by raising the GLP concentration. These results suggest that the anti-lipidperoxidation and radical scavenging activity of GLP may play an important part in the liver protection action.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.37-38
• /
• 2022

During the past decades, the corrosion of the steel rebar embedded in concrete structure surrounding marine environment is actually problematic and required the suitable preventive method. An eco-friendly corrosion inhibitor mix is investigated to stifle the active corrosion in comparison with other commercial corrosion inhibitors. The hybrid inhibitor enhances the corrosion resistance and the workability of concrete. However, it reduces the compressive strength slightly after 28-day-age. The electrochemical studies and mechanical studies are pointed out the corrosion resistance property, corrosion kinetics, and the mechanical properties of all concrete samples. H-3 is the optimum dose of hybrid inhbitor that meets the demand of both electrochemical property and mechanical property. It performs the noble features due to the formation of optimum amount of P-Zwitterions-(Cl)-Fe complex onto the steel rebar surface.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1982

Water quality of downstream of the Nagdong river, using for agricultural irrigation of the Gimhae plain, were observed. Water temperature, turbidity, residue, pH, BOD, COD, DO, hardness, chloride, sulphate, phosphate, inorganic nitrogenous compounds, sodium, general bacteria, E. coli and heavy metals of the water were investigated at Daejeo, Sikman, Bongrim, Noksan, Machal and Jangyou pumping stations in the Gimhae plain in May, July and October, 1981. The results obtained were as follows; 1) Average value of analyzed components of the water at all sampling sites were 7.8 pH, 6.3 ppm BOD, 6.5 ppm COD, 6.4 ppm DO, 231 ppm hardness, 582 ppm Cl-, 412 ppm $SO_4--$, 2.32 ppm $PO_4---$, 3.8 ppm $NH_4+,\;478\;ppm\;Na+$, 2964 No. /100 ml total coliform, 0.0040 ppm Cd, 0.0066 ppm Pb, respectively. 2) The most heavily polluted site of all investigated ones was Sikman. It seemed to be caused by the vast quantity of wastewater discharged from industrial district in Gimhae city. The next polluted sites were Bongrim, Daejeo and Noksan, and comparatively less polluted sites were Machal and Jangyou, judging from both appearance and physicochemical observation. 3) At Sikman, the most heavily polluted site, average value of components were 8.0 pH, 8.1 ppm BOD, 8.2 ppm COD. These values were close to the limit point of agricultural water quality standard of 8.0 ppm BOD (COD). 4) Any apparent variation was not observed by the sampling season in most components except DO and $NH_4+$. DO of October was higher than that of May or July but $NH_4+$ was low. 5) $NH_4+$ content was comparatively high in downstream of the Nagdong river of which water is used as the agricultural irrigation in the Gimhae plain. Therefore, fertilizer application on the farming land must make account of nitrogen content of the irrigation water 6) It was considered that chloride and sodium contents would not influence the crop cultivation in common season, but in dry season irrigation must be done carefully.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.181-188
• /
• 2008

A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.