• Research in Plant Disease
• /
• v.29 no.1
• /
• pp.82-87
• /
• 2023

Exogenous ferrous chloride (FeCl₂) suppressed in vitro growth of Ralstonia pseudosolanacearum, causing bacteria for tomato bacterial wilt. More than 50 μM of FeCl₂ reduced the in vitro bacterial growth in dosedependent manners. Two to 200 μM of FeCl₂ did not affect the fresh weight of detached tomato leaves at 3 and 5 days after the petiole dipping without the bacterial inoculation. The bacterial wilt of the detached tomato leaves was evaluated by inoculating two different inoculum densities of R. pseudosolanacearum (10⁵ and 10⁷ cfu/ml) in the presence of FeCl₂. Bacterial wilt in the detached leaves by 10⁵ cfu/ml was efficiently attenuated by 10-200 μM of FeCl₂ at 3 and 5 days post-inoculation (dpi), but bacterial wilt by 10⁷ cfu/ml was only reduced by 200 μM of FeCl₂ at 3 and 5 dpi. These results suggest that iron nutrients can be included in the integrated disease management of tomato bacterial wilt.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.100-105
• /
• 2010

An EPDM article was aged in air, distilled water, tap water, NaCl/$CaCl_2$ solution, and $CaCl_2/FeCl_3$ solution for 7 days. The aging temperature was $90^{\circ}C$. The samples aged in air and distilled water did not appear the whitening, those aged in tap water, NaCl/$CaCl_2$ solution, and $CaCl_2/FeCl_3$ solution showed the whitening. Soluble organic materials were analyzed using GC/MS to identify the whitening materials, surface morphology of the aged sample surface was examined using image analyzer and SEM, and elemental analysis of the materials accumulated on the sample surface was performed using EDX. Principal reason to cause whitening might be formation of metal salt of fatty acid by reaction between metal cation and fatty acid.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.412-418
• /
• 2020

This paper produced an automatic fluid management system that can accurately control the specific gravity of etching solution(FeCl₃), and produced a SUS MASK applied to OLED. The target was set at 0.4 mm in diameter of the hole. As a result of this misconception, the etching speed increased when the specific gravity(S.G) value of FeCl₃ was changed from 1.43 to 1.49. And when the weight was 1.49, it was found that the vertical diameter was 0.405 mm, approaching the target. When pressure injection was varied from 2.0kg/cm2 to 3.5kg/cm2, the hole diameter at 3.0 kg/cm2 averaged 0.4mm, matching the target. The characteristics of the change in gravity were analyzed by applying the additive 1.2% and setting the weight at 1.430 by mixing HCl and H2O in FeCl₃ and fixing the injection pressure at 3.0 kg/cm2. When the weight changed from 1.460 to 1.469 the etching speed increased from 0.564 to 0.540. When the weight was 1.467, the hole diameter was measured at 0.4 mm and the target was reached.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.419-424
• /
• 2022

The oxidative degradation performance of the Erionyl Navy R dye was studied in this article. The investigation mainly focused on a comparative study between chemical oxidations by sodium hypochlorite (NaClO) and hydrogen peroxide (H₂O₂), and catalytic oxidations including the Fenton (Fe²⁺-H₂O₂) and Fenton-Like (Fe²⁺/ Fe³⁺/Co²⁺/ Mn²⁺-H₂O₂) or modified Fenton-like (Fe²⁺/ Fe³⁺ -NaClO) reactions. A discoloration and degradation of the Erionyl Navy R occurred after 30 minutes, which varies according to the oxidation system involved; 31%, 54%, <20%, 95%, and >96% losses were observed for Co²⁺-H₂O₂, Mn²⁺-H₂O₂, Fe²⁺-NaClO, Fe³⁺-NaClO), and Fe²⁺-H₂O₂ and Fe³⁺-H₂O₂, respectively.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.148-154
• /
• 2003

The addition of Ni leads to the formation of protective rust layer on steel and subsequently high corrosion resistance of steel in $Cl^-$-containing environment. $\alpha$-FeOOH, $\beta$-FeOOH, $\gamma$-FeOOH and $Fe_3O_4$ are formed mainly on steels exposed to $Cl^-$-containing environment. As the first work of this kind, this study reports the influence of Ni on the oxidation behavior of $Ni_xFe_{1-x}(OH)_2$ in $Cl^-$-containing solution at two different pH regions(condition I under which the solution pH is allowed to decrease and condition I under which solution pH is maintained at 8) where $\gamma$-FeOOH and $Fe_3O_4$ are predominantly formed, respectively, upon oxidation of $Fe(OH)_2$, In the presence of Ni(II) in the starting solution, the formation of $\beta$-FeOOH was facilitated and the formation of $\gamma$-FeOOH was suppressed with increasing Ni(II) content and with increasing oxidation rate of Fe(II). Ni(II) was found to have $Fe_3O_4$-suppressing effect under condition II.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.35-39
• /
• 1997

This study was carried out to find the existing forms of chlorlnc in EM dust and to understand the valaliliratian behavior and the removal of chlorine from EAF dust with lemperalure and heating almosphere The chemical compositions of dust A are 27.3%Fe. 21.8%3Zn, 3 15%Pb, 3 51%C1 and that of dust B BE 33.92%Fe, 15.94%Zn, 2.73% Pb, 3.98%Cl. The XRD analysis and water leaching test shows that chlorlne in EM dust exist mainly as NaCI, KCI, Pb (0H)Cl. Above 99% of chlorine was volatilized when dust was hentcd in alr atmosphere at 1100$^{\circ}$C h r 1 hour and that was 96% when heated in reduction atmosnherc at 1100$^{\circ}$C for 1 hour.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.6
• /
• pp.354-359
• /
• 2018

NaCl-induced hot corrosion behavior of ASTM T22 (Fe-2.25Cr-1Mo), T91 (Fe-9Cr-1Mo), T92 (Fe-9Cr-1.8W-0.5Mo), 347HFG (Fe-18-Cr-11Ni), and 310H (Fe-25Cr-19Ni) steels was studied after spraying NaCl on the surface. During corrosion at $600-800^{\circ}C$ for 50-100 h, thick, non-adherent, fragile, somewhat porous oxide scales formed. All the alloys corroded fast with large weight gains owing to fast scaling and destruction of protective oxide scales. Corrosion rates increased progressively as the corrosion temperature and time increased. Corrosion resistance increased in the order of T22, T91, T92, 347HFG, and 310H, suggesting that the alloying elements of Cr, Ni, and W beneficially improved the corrosion resistance of steels. Basically, Fe oxidized to $Fe_2O_3$, and Cr oxidized to $Cr_2O_3$, some of which further reacted with FeO to form $FeCr_2O_4$ or with NiO to form $NiCr_2O_4$.

• Carbon letters
• /
• v.13 no.1
• /
• pp.44-47
• /
• 2012

We analyzed the effect of etchants for metal catalysts in terms of the characteristics of resulting graphene films, such as sheet resistance, hall mobility, transmittance, and carrier concentration. We found the residue of $FeCl_3$ etchant degraded the sheet resistance and mobility of graphene films. The residue was identified as an iron oxide containing a small amount of Cl through elemental analysis using X-ray photoelectron spectroscopy. To remove this residue, we provide an alternative etching solution by introducing acidic etching solutions and their combinations ($HNO_3$, HCl, $FeCl_3$ + HCl, and $FeCl_3+HNO_3$). The combination of $FeCl_3$ and acidic solutions (HCl and $HNO_3$) resulted in more enhanced electrical properties than pure etchants, which is attributed to the elimination of left over etching residue, and a small amount of amorphous carbon debris after the etching process.

• Journal of Powder Materials
• /
• v.6 no.4
• /
• pp.294-300
• /
• 1999

This study was carried out to investigate the possibility whether Metal Injection Molding (MIM) process could be applied to 95wt.%W-3.5wt.%Ni-1.5wt.%Fe heavy alloy in order to obtain an intricate shape. Methylcellulose was used in the injection molding for binder. $FeCl_2-4H_2O$ was added in solvent substituting Fe powder and $FeCl_2$ was doped on W-Ni premixed powder. When $FeCl_2-4H_2O$ was added in solvent, the binder separation occurred for injection molding so that the matrix content was changed. Such problem was solved when $FeCl_2$ was doped. In this study. the debinding process did not affect residual carbon content. The sintered microsouctures as addition methods of Fe element and the sintering temperature from $1420^{\circ}C$ to $1470^{\circ}C$, which are around the temperature of liquid phase formation, were observed.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.2
• /
• pp.101-109
• /
• 1995

Electroetching rates of $FeCl_3$ solution were increased according to increasing solution temperature. Activation energy of electroetching at Be'36 and 5A/$dm^2$ condition was 28.3Kcal and also, at Be'46 and 5A/dm$^2$ condition was 33.2Kcal. At Be'36 concentration of $FeCl_3$ solution, electroetching rate were more higher than at Be'46 concentration. Surfaces of etched grooves obtained at 8A/$dm^2$ or higher current density in 46 Be' concentration of $FeCl_3$ solution were observed to be flat and smooth owing to suppressing chemical etching reaction. Distinctly etched boundaries became to be appeared at 2A/$dm^2$ in Be'41 electroetching condition by differential effects. In case of applying 8A/$dm^2$ current density to Be'46 of $FeCl_3$ solution, etching depth were 4 times and side etching were 6 times more than chemical etching case respectively.