• Journal of Korea Foundry Society
• /
• v.33 no.3
• /
• pp.103-112
• /
• 2013

Effect of Fe and Mn contents on the tensile properties of Al-4 wt%Mg-0.9 wt%Si alloy system has been studied. Common phases of Al-4 wt%Mg-0.9 wt%Si alloy system were ${\alpha}$-Al, $Mg_2Si$, ${\alpha}-Al_{12}(Fe,Mn)_3Si$ and ${\beta}-Al_5FeSi$. As Fe content of Al-4 wt%Mg-0.9 wt%Si alloy system increased from 0.15 wt% to above 0.3 wt%, ${\beta}-Al_5FeSi$ compound appeared. When Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, morphology of plate shaped ${\beta}-Al_5FeSi$ compound changed to chinese script ${\alpha}-Al_{12}(Fe,Mn)_3Si$. As Fe content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Mn alloy increased from 0.15 wt% to 0.4 wt%, tensile strength of the as-cast alloy decreased from 191 MPa to 183 MPa and, elongation of the alloy also decreased from 8.0% to 6.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with low Mn/Fe ratio of the alloy. However, when Mn content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Fe alloy increased from 0.3 wt% to 0.5 wt%, tensile strength of as-cast alloy increased from 181 MPa to 194 MPa and, elongation of the alloy increased from 6.8% to 7.0%. These improvements attribute to the morphology change from ${\beta}-Al_5FeSi$ phase to chinese script, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ phase shape-modified from with high Mn/Fe ratio of the alloy.

• Journal of Korea Foundry Society
• /
• v.33 no.6
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.305-314
• /
• 1991

This study was conducted to research the formation and the color development of NiO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing ZnO-Fe2O3 as a basic composition, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.Fe2O3 system, {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.TiO2 system, and {{{{ chi }}NiO.(l-{{{{ chi }})ZnO.SnO2 system were prepared with {{{{ chi }}=0, 0.2, 0.5, 0.7, 1 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 30 minutes. The reflectance measurement and the X-ray analysis of these specimens were carried out and the results were summarized as follows. 1. In the specimens which included NiO, it was difficult for the spinel structure to be formed. 2. As increasing the contents of NiO and Fe2O3, all the groups which were yellow or green colored changed to brown. 3. NiO-ZnO-Fe2O3 system and NiO-ZnO-TiO2 system formed the spinel structure and the illmenite structure appeared in NiO-TiO2 system.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.93-99
• /
• 1997

High Temperature wear behavior of plasma sprayed ZrO$_2$ and MoS$_2$, $Fe_2O_3$ coatings were investigated for high temperature wear resistance applications. The MoS$_2$, $Fe_2O_3$ added powders containing 2.5, 5.0, 7.5, 10.0 mol% of $MoS_2$, $Fe_2O_3$ for plasma spray were made by spray drying method. Wear test were performed at temperature ranges from room temperature to 600$\circ$C. The microstructural change of coatings and the worn. surface were examined by SEM and XRD. In ZrO$_2$ coating, the coefficient of friction and wear amount of room temperature to 400$\circ$C was increased with temperature and decreased with temperature over 400$\circ$C. The coefficient of friction and wear amount of MoS$_2$ added coatings were increased with temperature, but those of $Fe_2O_3$ added coatings had lower coefficient of friction and higher wear resistance than ZrO$_2$ coating.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1725-1728
• /
• 2004

An experiment was conducted to investigate the efficiency of transfer of dietary iron sources to eggs of laying hens. Eighty ISA-Brown laying birds of 30 wk old were housed in 40 cages of 2 birds each. Eight birds in four cages were assigned to one of the following ten treatments: T1; control, T2; 100 ppm iron supplementation with iron-methionine chelate (Fe-Met-100), T3; Fe-Met- 200, T4; Fe-Met-300, T5; 100 ppm iron supplementation with iron sulfate ($FeSO_4$-100), T6; $FeSO_4$-200, T7; $FeSO_4$-300, T8; 100 ppm iron supplementation with Availa-$Fe^{(R)}$ (Availa-Fe-100), T9; Availa-Fe-200 and T10; Availa-Fe-300. Results of 40 d feeding trial showed that there were no consistent responses in laying performance by source and level of iron supplementation. However, eggshell strength and color were improved by Fe supplementation. Egg iron content was maximized at 10-15 days after feeding supplemental Fe. Fe- Met was the most effective source in enriching Fe of eggs followed by Availa-Fe and $FeSO_4$. Increasing supplementary Fe level more than 100 ppm was not effective in Fe-Met and Availa-Fe treatments. Average Fe enrichment of 18% was achieved after feeding Fe-Met-100 for 15 d. In conclusion, enrichment of Fe in egg could be effectively achieved by supplementation of Fe-Met-100 for 15 d.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.898-907
• /
• 1997

Fe-22Cr-5AI-X(X=Zr, Y)합금을 1143K, 고온 황화(P$s_{2}$=1.11x$10^{-7}$atm, P$O_{s}$ =3.11x$10^{-20atm}$) 및 황화/산화 (P$s_{2}$=8.31x$10^{-8}$atm, P$O_{s}$ =3.31x$10^{-18atm}$) 환경의 복합가스 분위기에서 1-30시간동안 노출하여 합금표면에 형성된 부식층을 관찰하여 SEM/EDS로 분석하였다. Fe-22Cr-5AI합금은 고온 부식환경에서 부식 생성물의 성장은 포물선법칙을 따르고 주요 성분은 결함이 많고 다공질인 철과 크롬의 황화물[(Fe, Cr)Sx]이므로 고온 내식성이 감소하였다. Zr을 1wt%첨가한 Fe-22Cr-5AI합금의 고온 부식거동은 Y을 1wt%첨가한 합금과 비슷한 거동을 나타내었다. 황화환경에서는 Cr의 선택 황화에 의한 크롬 황화물(CrS)이 생성되고 노출시간의 경과에 따라 (Fe, Cr)Sx나 (Cr, Fe)Sx 등의 황화물의 성장으로 고온 내식성이 감소하였다. 그러나 황화/산화환경에서는 초기에는 알루미늄산화물(A $I_{2}$ $O_{3}$)및 지르코늄산화물(Zr $O_{2}$)등이 생성되어 보호적이었으나 15시간이후 부터 (Fe, Cr)Sx나 (Cr, Fe)Sx 의 황화물의 성장으로 고온 내식성이 감소하였다.

• Korean Journal of Materials Research
• /
• v.9 no.1
• /
• pp.104-107
• /
• 1999

We investigated the effects of cooling condition on deep levels and iron precipitate formation in iron-contaminated p-type silicon by DLTS(Deep Level Transient Spectroscopy) and preferential etching technique. Dependency of cooling condition on Bulk Micro-Defect (BMD) and four different iron-related deep traps were observed. For normal cooling condition, T1, T2, T3, T4 traps that related to Fe\ulcorner or Fe-O complex were obtained. However, the trap with activation energy, 0.4 eV was observed for slow cooling condition. The trap caused by the $\textrm{Fe}^{+}\textrm{}^{-}$ pair (H4:0.56eV) were detected only at the case of $\textrm{LN}_{2}$ quenching condition.

• Journal of Welding and Joining
• /
• v.25 no.3
• /
• pp.51-56
• /
• 2007

A $CO_2$ laser overlay was conducted by using a Fe-based powder on the AC2B aluminum substrate. Cracks and intermetallic compounds (IMC) were observed inconsistently along the interface between the overlay and post-molten layer. A scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) detected some Fe-rich IMC ($Fe_3Al$, FeAl) as well as the brittle Al-rich IMC ($Fe_2Al_5,\;FeAl_3$). Micro vickers hardness proved the formation of Al-rich IMC ($FeAl_3$) along the interface by showing HV0.1 $800{\sim}900$. Furthermore, nano indentation was successfully applied to investigate the behavior of IMC more precisely than the micro vickers hardness.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.114-117
• /
• 2011

A thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated and then thin 1.6 ${\mu}m$ thickness P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated also. These thick and thin P(VDF/TrFE) film pyroelectric infrared ray sensor was mounted in TO-5 housing to detect infrared light of 5.5 ~ 14 ${\mu}m$ wavelength for human body detecting with each other. The noise output voltage of the thick P(VDF/TrFE) film pyroelectric infrared ray sensor were 380 mV and NEP(noise equivalent power) is $3.95{\times}10^{-7}$ W which is the similar value with the commercial pyroelectric infrared ray sensor using ceramic materials as a sensing material. The NEP and specific detectivity $D^*$ of the thin P(VDF/TrFE) film pyroelectric infrared ray sensor were $2.13{\times}10^{-8}$ W and $9.37{\times}106$ cm/W under emission energy of 13 ${\mu}W/cm^2$ respectively. These result caused by lower thermal diffusion coefficient of a thin 1.6 ${\mu}m$ thickness PVDF/TrFE film than the thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.303-303
• /
• 2008

$LiMn_2O_4$는 출력특성이 좋고 가격이 저렴하지만 전해액 중에서 $Mn^{2+}$이 용출되어 나오는 것과 반복적인 충방전시 구조가 파괴되는 단점이 있어 이것을 보완하고자 $FePO_4\cdot2H_2O$를 $LiMn_2O_4$의 표면에 코팅하였다, $LiMn_2O_4$를 모재로, $FePO_4\cdot2H_2O$를 코팅재로 사용하여 $FePO_4\cdot2H_2O$의 코팅량 변화와, 열처리 온도변화에 따른 물성 변화를살펴보았다, LiOH 와 $MnO_2$의 혼합물을 $1000^{\circ}C$ 에서 소성하여 $LiMn_2O_4$를 합성하고, Fe$(NO_3)_3$ 수용액과 $NH_4H_2PO_4$ 수용액을 혼합하여 $FePO_4\cdot2H_2O$를 제조하였다, $LiMn_2O_4$에 $FePO_4\cdot2H_2O$를 1wt%, 2wt%, 3wt% 비율로 ball milling 을 통해 코팅한 후, 온도를 변화시키면서 열처리 하였다. 코팅한 물질을 XRD를 통해 구조를 분석하고 SEM을 이용하여 형상을 관찰하였다. 또한 고온에서의 $Mn^{2+}$의 용출량을 ICP로 측정하고 half-cell을 만들어 충방전 test를 통해 충방전 특성을 조사하였다. 아울러, 코팅량과 열처리 온도 등 합성변수들이 소재특성 및 전기화학적 특성에 미치는 영향을 조사하였다.