• Preventive Nutrition and Food Science
• /
• v.7 no.2
• /
• pp.133-138
• /
• 2002

To examine the cholesterol-towering effects of extruded products made with cassava starch (CS) and blends of cassava starch with either resistant starch (CS-RS) or oat fiber (CS-OF) hamsters were fed with diets containing a high-cholesterol (2%) and high-fat (17%) diet for 20 days. Hamsters fed with a diet containing no cholesterol were used as a control. Total cholesterol (TC) levels in the CS-RS and CS-OF groups were significantly (p>0.05) lower compared to the CS group by 11.5% and 8.5%, respectively. Also, the diets containing fibers decreased the value of low-density lipoproteins plus very low-density lipoproteins fraction by 32.4% (CS-RS diet) and 51.7% (CS-OF), respectively, as compared to the CS diet. Total lipid values were significantly (p<0.05) lower in hamsters fed the CS-RS diet (916 mg/dL) and CS-OF diet (964 mg/dL) as compared to those fed the CS diet (1661 mg/dL). The results obtained in this study suggest that extruded products containing cassava starch blended with either resistant starch or oat fleer, could prevent health problems associated with high levels of cholesterol and hypertriglyceridemia induced by a high cholesterol and fat diet.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.607-615
• /
• 2016

The delamination along the annual ring on the cross-section of laminae and the bonding strength according to the tangential angle between laminae were evaluated for the production of 3-ply cross-laminated timber (CLT) using domestic larch. Since there is no standard for CLT in Korea, the production and test of specimens for bonding strength followed the standard procedure of "Structural glued laminated timber" (KS F 3021). The standard specifies to exclude any measurement from the cracks of timbers resulted from drying or knots during delamination test of the glued laminated timbers. However, the failure of cross-sectional tissues along the annual rings was observed near the glue-line of all specimens during the delamination test. Because this phenomenon can generate defects in the CLT that may be exposed to various temperatures and relative humidities after the actual construction, the delamination percentage was measured by including this wood failure. As a result, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed inward was the lowest, which was around 13%, regardless of the annual ring direction of the middle lamina. On the other hand, the delamination percentage of the CLT which had been combined in such a way that the annual rings of outer lamina were directed outward was the highest, which was around 26%. Furthermore, end-split occurred in the outer lamina during the drying process of the boiling delamination test, which affected the delamination percentage. Therefore, the soaking delamination test was found to be more appropriate for evaluating the delamination strength of CLT. The block shear strength of larch CLT was $3.9{\pm}0.9$ MPa on average, which was 46% lower than the block shear strength requirement (7.1 MPa) of the standard, but satisfied the criteria of the block shear strength (3.5 MPa) of the European Standard (prEN 16351: 2013).

• Korean Journal of Pharmacognosy
• /
• v.48 no.4
• /
• pp.261-267
• /
• 2017

As part of the search for bioactive constituents of Korean medicinal plants, twelve steroids (1-12) were isolated from the rhizomes of Dioscorea nipponica. The isolated compounds were identified as diosgenin ($3{\beta}$, 25R)-spirost-5-en-3-ol (1), 25(R)-dracaenoside E (2), dioscin (3), gracillin (4), prosapogenin B (5), 25(R)-dracaenoside G (6), diosgenin 3-O-${\beta}$-D-glucopyranosyl($1{\rightarrow}3$)-${\beta}$-D-glucopyranoside (7), ophipogonin C′ (8), 7-oxodioscin (9), protodioscin (10), hypoglaucin F (11), and protoneogracillin (12). Their structures were characterized by spectroscopic data and identified by comparing these data with those in the literatures. All the isolates (1-12) were evaluated for their neuroprotective effects through induction of nerve growth factor in C6 glioma cells and effects on nitric oxide (NO) production in murine microglia cell line BV-2. Compounds 7 and 12 were found to induce upregulation of NGF secretion without causing significant cell toxicity and compound 4 exhibited potent anti-neuroinflammatory activity.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.585-586
• /
• 2015

4U 1323-62, a low mass X-ray binary with an orbital period of 2.94 hr, exhibits periodic X-ray dips, which are due to absorption by the bulge of the outer accretion disk. The purpose of this study is to search for orbital period changes using archived X-ray data over a time span of 20 years. We present our preliminary results from analyzing light curves observed by RXTE, BeppoSAX, XMM-Newton and Suzaku. We used the method proposed by Hu et al. (2008) to estimate dip center time and adopted the Observed - Calculated method to measure changes in period. We obtained an orbital period of 2.941917(36) hr and a period derivative of $\dot{P}_{orb}/P_{orb}=(-9.9{\pm}3.5){\times}10^{-7}yr^{-1}$. The F-test result shows that the quadratic ephemeris is describes the evolution of the dip phases better than the linear ephemeris at a greater than 95% confidence level. More X-ray data collected from the early 80s will be included to further refine the orbital ephemeris.

• Journal of Radiation Protection and Research
• /
• v.2 no.1
• /
• pp.24-30
• /
• 1977

Les eaux de $g\'{e}n\'{e}rateur$ de vapeur d'un $r\'{e}acteur$ P. W. R peuvent $\^{e}tre$ $contamin\'{e}es$ par des $radio-\'{e}lements$. Ces eaux sont habituellement $condition\'{e}es$ 'phosphate' pour limiter leur $agressivit\'{e}$ et la tendence actuelle est de remplacer les phosphate par un conditionment 'Amoniaques'. La $pr\'{e}sente$ $\'{e}tude$ a pour but de definir la $possibilit\'{e}$ $d'{\'{e}}purer$ des eaux $condition\'{e}es$ $\'{a}$ l'ammoniaque $\'{a}$ l'aide $d'{\'{e}}changeurs$ d'ion organiques. Des Facteurs de $D\'{e}contamination$ (F. D) en Cesium 137 et Strontium 90 et la $dur\'{e}e$ du cycle $d'{\'{e}}puration$ ont $d\^{u}$ $\^{e}tre$ bien meilleurs avec une colonne de 10 ml de $r\'{e}sine$ Carborylique Duolite $CC_4$ mise sous forme acide, suivie d'une colonne de 10 ml de $r\'{e}sine$ cationique Amberlite IR 120 mise sous forme acide et suivie d'une colonne de 10 ml de $r\'{e}sine$ anionique Amberlite IRA 400 mise sous forme hydroxyde.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.3
• /
• pp.75-83
• /
• 2019

Purpose: There are no clear criteria for slip performance in the BF certification process, so the evaluator relies on subjective judgments depending on the field situation. Physical criteria for determining the slip performance of various floor finishes are not clear. C.S.R., the only criterion currently being used to check slip performance, may raise questions about its coverage, feasibility and reliability. Method: For an analysis of domestic standards and status, KS L 1001, KS M 3510, and KS F 2375. External standards are analyzed for ADA Standard, ANSI Standard, and BS EN Standard. Analyze the test methods and evaluation criteria of O-Y-PSM, BPT, and the dynamic slip resistance test used in these criteria. It also presents an improvement plan for the rational presentation of standards. Results: To date, various kinds of test methods and measuring devices of the slip resistance coefficient have been developed, but there are not many ways to trust useful results related to user safety. Reliability and thoroughly verified test methods and criteria should be used to assess the slip performance of the floor. In order to improve the standard for the evaluation of slip performance in Korea, the existing standard should first be raised to the same level as the overseas standard, and the application of the discriminatory standard should be applied considering the characteristics and usage patterns of each space. Implication: Currently, Korean standards propose various test methods, but the proper use of test methods, scope and assessment criteria are not established, so improvement of the comprehensive standard is necessary.

• Wind and Structures
• /
• v.34 no.6
• /
• pp.483-497
• /
• 2022

Three-dimensional (3D) computational fluid dynamics (CFD) analysis of flow around a hipped-roof building representative of UK inland conditions are conducted. Unsteady simulations are performed using three variations of the k-ϵ RANS turbulence model namely, the Standard, Realizable, and RNG models, and their predictive capability is measured against current European building standards. External pressure coefficients and wind loading are found through the BS 6399-2:1997 standard (obsolete) and the current European standards (BS EN 1991-1-4:2005 and A1:20101). The current European standard provides a more conservative wind loading estimate compared to its predecessor and the k-ϵ RNG model falls within 15% of the value predicted by the current standard. Surface shear stream-traces and Q-criterion were used to analyze the flow physics for each model. The RNG model predicts immediate flow separation leading to the creation of vortical structures on the hipped-roof along with a larger separation region. It is observed that the Realizable model predicts the side vortex to be a result of both the horseshoe vortex and the flow deflected off it. These model-specific aerodynamic features present the most disparity between building standards at leeward roof locations. Finally, pedestrian comfort and safety criteria are studied where the k-ϵ Standard model predicts the most ideal pedestrian conditions and the Realizable model yields the most conservative levels.

• Nutrition Research and Practice
• /
• v.17 no.2
• /
• pp.269-283
• /
• 2023

BACKGROUND/OBJECTIVES: This study aimed to examine the food security status of urban poor adolescents and its association with diet quality. SUBJECTS/METHODS: A cross-sectional survey was conducted among 188 adolescents aged 13-18 yrs living in Kuala Lumpur, Malaysia. Household food insecurity and dietary intake data were collected using the Radimer/Cornell hunger and food insecurity instrument and 2-day 24-h dietary recalls, respectively. Diet quality was determined using the Malaysian Healthy Eating Index (HEI). Weight and height were measured and body mass index-for-age, as well as height-for-age z scores were calculated. RESULTS: The present study revealed that 47.9% of the adolescents experienced household food insecurity, 24.5% experienced individual food insecurity, 18.6% household food security, and 9.0% child hunger. The mean score of diet quality was 56.83 ± 10.09, with a significantly lower HEI score among food insecure adolescents (household food insecure, individual food insecure, and child hunger) than household food secure adolescents (P = 0.001). The differences between food secure and food insecure households were found to be significant for energy (P = 0.001) and nutrients including proteins (P = 0.006), carbohydrates (P = 0.005), dietary fiber (P = 0.001), folate (P < 0.001), and vitamin C (P = 0.006). The multiple linear regression showed that adolescents who experienced food insecurity (β = -0.328; P = 0.003) were found to be significantly associated with poor diet quality (F = 2.726; P < 0.01), wherein 13.3% of the variation in the diet quality was explained by the food security status. CONCLUSIONS: Experiencing food insecurity contributed to poor diet quality among urban poor adolescents. Further longitudinal studies are needed to comprehensively understand this association to improve food insecurity and diet quality among urban poor communities.

• Structural Engineering and Mechanics
• /
• v.86 no.1
• /
• pp.119-137
• /
• 2023

The purpose of this research is to assess the performance of CBN and ceramic tools during the dry turning of gray cast iron EN GJL-350. During the turning operation, the variable machining parameters are cutting speed, feed rate, depth of cut and type of the cutting material. This contribution consists of two sections, the first one deals with the performance evaluation of four materials in terms of evolution of flank wear, surface roughness (2D and 3D) and cutting forces. The focus of the second section is on statistical analysis, followed by modeling and optimization. The experiments are conducted according to the Taguchi design L₃₂ and based on ANOVA approach to quantify the impact of input factors on the output parameters, namely, the surface roughness (Ra), the cutting force (Fz), the cutting power (Pc), specific cutting energy (Ecs). The RSM method was used to create prediction models of several technical factors (Ra, Fz, Pc, Ecs and MRR). Subsequently, the desirability function approach was used to achieve a multi-objective optimization that encompasses the output parameters simultaneously. The aim is to obtain optimal cutting regimes, following several cases of optimization often encountered in industry. The results found show that the CBN tool is the most efficient cutting material compared to the three ceramics. The optimal combination for the first case where the importance is the same for the different outputs is Vc=660 m/min, f=0.116 mm/rev, ap=0.232 mm and the material CBN. The optimization results have been verified by carrying out confirmation tests.

• Journal of Korean Philosophical Society
• /
• v.116
• /
• pp.389-410
• /
• 2010

Augustin wurde sozusagen von der Rhetorik zum Christentum bekehrt. Der einstmalige Rhetorikprofessor (bis 386) distanziert sich von seiner $fr{\ddot{u}}heren$ Kunst. Aber er $kn{\ddot{u}}pft$ als Bischof im vierten Buch seiner weniger bekannten Schrift "De doctrina Christiana" (DDC; abgef. 427) wieder an die antike Rhetorik, speziell an Cicero, an. So wird die augustinische $Sp{\ddot{a}}tschrift$ $f{\ddot{u}}r$ eine antike Rhetorik in christlicher Verwendung gehalten. Es stellt nun die Frage, was Augustin zur $R{\ddot{u}}ckkehr$ zu seiner $fr{\ddot{u}}heren$ Kunst bewegte. Neuere Forschungen sehen in Augustins Werk eine Grundlage der mittelalterlichen Predigttheorie oder einen $blo{\ss}en$ Versuch, die Rhetorik vom Makel des Sophistischen zu befreien. Gewiss ist seine Einstellung zur "leeren Beredsamkeit" der Sophistik eindeutig, aber dies war eine Haltung, die letztlich von allen seinen christlichen Zeitgenossen geteilt wurde und folglich eines geringen Beweises bedurfte. Die Aufmerksamkeit, die Augustins $sp{\ddot{a}}terem$ Einfluss und seiner Ablehnung der Zweiten Sophistik geschenkt wird, kann den Blick $tr{\ddot{u}}ben$ $f{\ddot{u}}r$ seine Rolle bei der $L{\ddot{o}}sung$ eines christlichen Dilemmas aus dem vierten Jahrhundert. Augustin sah die Gefahren einer entgegengesetzten rhetorischen $H{\ddot{a}}resie$. Die $S{\ddot{u}}nde$ des Sophisten besteht darin, dass er die Notwendigkeit des Inhalts verneint und glaubt, nur die forma alleine sei $w{\ddot{u}}nschenswert$. Der gegenteilige Fehler, dem Geschichtsschreiber der Rhetorik niemals einen Namen gegeben haben, beruht auf dem Glauben, dass derjenige, der im Besitz der Wahrheit ist, auch ipso facto in der Lage ist, die Wahrheit anderen zu ${\ddot{u}}bermitteln$. Es handelt sich um eine $ausschlie{\ss}liche$ $Abh{\ddot{a}}ngigkeit$ von der materia. Augustin erkannte eine Gefahr und benutzte DDC dazu, eine Verbindung von Inhalt und Form in der christlichen Predigt voranzutreiben. Nur wenn man daher das Buch als einen Teil der $gro{\ss}en$ Debatte des vierten Jahrhunderts ansieht, tritt seine historische Bedeutung klar hervor. Der Leser ist beeindruckt davon, dass der Autor darauf insistiert, es sei eine Torheit, dem Feind ein $n{\ddot{u}}tzliches$ Instrument zu ${\ddot{u}}berlassen$. Augustin $erkl{\ddot{a}}rt$, dass die Kunst der Beredsamkeit rege in Gebrauch genommen und nicht kurzerhand abgelehnt werden solle, weil sie mit dem Makel des Heidentums behaftet sei. Kurz gesagt, geplant ist das vierte Buch von DDC als eine ratio eloquentiae Christianae.