• Korean Journal of Soil Science and Fertilizer
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2003

Time domain reflectometry (TDR) is a newly developed method for measuring simultaneously solute concentrations and volumetric water content of soil. Bulk electrical conductivity ($EC_a$) of soil is obtained from TDR signal using several equations proposed, and electrical conductivity of soil solution ($EC_w$) can be calculated using the linear relationship $EC_a=EC_w\theta(a\theta+b)+EC_s$ between $EC_a$ and $EC_w$ at constant soil water content. The objectives of this study were to evaluate $EC_a$ proposed by several workers and to obtain the empirical constants (a, b, and $EC_s$) for $EC_w$ of the soils from A, Bl, and B2 horizon of an agricultural field (Coarse loamy, Fluvaquentic Eutrudepts). The $EC_a$ proposed by Yanuka et al. responded most sensitively to the KCl solute concentrations. The empirical constants of a, b, and $EC_s$ for $EC_w$ were -0.249, 1.358, and 0.054 for A horizon, -2.518, 2.708, and 0.097 for Bl horizon, and 2.490, -0.250, and 0.103 for B2 horizon, respectively. Therefore, the results of this study showed that Yanuka et al. equation was most useful one in determining $EC_a$, from TDR signal for agricultural soil with low salinity and that the empirical constants for the calculation of $EC_w$, from $EC_a$ can be obtained through a simple calibration experiment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.63-65
• /
• 2021

This paper describes an integrated H/W-S/W implementation of elliptic curve digital signature algorithm (EC-DSA) using a security system-on-chip (SoC). The security SoC uses the Cortex-A53 APU as CPU, and the hardware IPs of high-performance elliptic curve cryptography (HP-ECC) core and SHA3 (secure hash algorithm 3) hash function core are interfaced via AXI4-Lite bus protocol. The signature generation and verification processes of EC-DSA were verified by the implementation of the security SoC on a Zynq UltraScale+ MPSoC device.

• Journal of Pharmaceutical Investigation
• /
• v.19 no.2
• /
• pp.63-69
• /
• 1989

Dissolution characteristics of indomethacin (IMC) from hydrophobic polymer solid dispersions were investigated. IMC-polyvinyl chloride (PVC) and IMC-ethylcellulose (EC) solid dispersions were prepared. The dissolution patterns of pure IMC, IMC-PVC and IMC-EC solid dispersions prepared at various ratios (1:1, 1:3, 1:5, 1:9 and 1:19 w/w), and those of corresponding physical mixtures were compared. It was found that the dissolution rates of IMC from solid dispersions with PVC or EC decreased in the order of 1:1>1:3>1:5>1:9>1:19 as the drug to polymer ratios decreased. Also the dissolution rates of IMC from EC solid dispersions increased according to flow rate, but PVC solid dispersions were not affected significantly. After all, PVC and EC matrices could be applied in sustained-release preparation of IMC.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.170-179
• /
• 2012

We examined pretreatment methods eliminating potassium and sodium efficiently for coir bag used in hydroponics by analyzing drainage coming from coir bags. In the first experiment we investigated for six coir bags with the high market shares. The three types of pretreatment were washing coir bags with only water for 7 days (W7S0), washing with water for 4 days and further with nutrient solution for 3 days (W4S3), and washing with only nutrient solution for 7 days (W0S7). In the second experiment we tested reproducibility of the experiment results for Bio Grow and coco Mix among six coir bags used in the first experiment to verify the results. As a result, the best pretreatments for the pH stabilization were W4S3 and W0S7. The EC value of the drainage was stabilized to less than 1.0 that is the same as EC of the supply solution on the fourth day in all treatments. The nutrients of the drainage in W7S0 was stabilized in 3~4 days but calcium and magnesium were depleted. We assessed that washing longer than 4 days was waste of water. The stabilization of coir bags in W0S7 was similar to it in W4S3, but washing with the nutrient solution for 7 days seemed to be uneconomical. The reproducibility experiment for two coir bags ensured the results in the first experiment. Therefore, the pretreatment method, which is the most simple to implement and economic, seems to wash with water for 3 days and then with the nutrient solution for 1 day before planting on coir bag.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.632-637
• /
• 2009

Poly(${\varepsilon}-caprolacton$)/ethyl cellulose (PCL/EC) microcapsules containing pluronic F127 were prepared by a spray drying method. The aqueous phase, 20% of pluronic F127 was dissolved in distilled water, and the organic phase, 5% of PCL and EC were dissolved in dichloromethane. The microcapsules were obtained by spray drying the water-in-oil (W/O) emulsion. According to the data of scanning electron microscopy and particle analyzer, tens of micro size microcapsules were observed. On a differential scanning calorimeter, the phase transition temperatures of microcapsules were observed and they were found around those of pluronic F127 and poly(${\varepsilon}-caprolacton$), which were the main components of the microcapsules. At the range of $30{\sim}45^{\circ}C$, temperature-dependent release properties were investigated using fluorescein isothicyanate-dextran (FITC-dextran) and blue dextran as a model drug. When the temperature was increased, the degree of release of microcapsule was also increased. FITC-dextran, the relative low molecular weight, was more released than blue-dextran.

• KSBB Journal
• /
• v.15 no.1
• /
• pp.49-54
• /
• 2000

Bioluminescence of Photobacterium phosphoreum has been used for the detection of pollutants in the environment. Immobilization method was used to maintain the stability of bioluminescence of P. phosphoreum. The carboxymethylcellulose was investigated to find out whether it was suitable for the immobilization of P. phosphoreum as a matrix without disturbing the bioluminescence emission. A maintenance of bioluminescence was determined from the P. phosphoreum immobilized on the various concentrations of carboxymethylcellulose. A relatively high bioluminescence intensity was shown with immobilized cells on 1%(w/v) carboxymethylcellulose. The effect of carboxymethylcellulose concentrations on the sensitivity of Crcompounds including $Na_{2}CrO_{4}$, $K_{2}CrO_{4}$, $CrO_{3}$, CrK$(SO_4)_{2}$ and $CrCl_{3}$ to the bioluminescence intensity. The calculated $EC_{50}$ showed that the linear relations between such substances and bioluminesence intensity were established.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.326-330
• /
• 2001

The characteristics of used wine yeast strains were as follows, S6U showed low fermentation speed than those of other yeast strains, but this strain fermented completely later. The wine fermented by W-3 was very low contents of total acid, 0.75% and the ones fermented by UCD530 and AC- contained much extract, 3.26 mg/L and 3.22 mg/L respectively. The wine fermented by CEG and CS2 were predominant in yellowness, and EC1118 produced large amount of acetaldehyde, 49.9 mg/L than those of other strains. EC1118 and CY3079 displayed low methylene blue dyeing ratio, below 15%, meaning high alcohol tolerance yeast. UCD530 produced extremely high contents of glycerol, succinate and lactate compared with other strains. These properties revealed that UCD530 was a typical Saccharomyces bayanus species. The main organic acids produced by wine yeasts were pyruvate, lactate, succinate and acetate. The concentration of acetate in experimental wine could be divided into two parts, one group had concentration below 170 mg/L (UCD530, EC1118, AC-, CY3079, W-3), and the other had concentration up to 350 mg/L (S6U, CEG, CS2).

• Microbiology and Biotechnology Letters
• /
• v.25 no.4
• /
• pp.403-407
• /
• 1997

Medium components for maximum activity of NAD$^{+}$-dependent formate dehydrogenase (EC 1.2.1.2; FDH) were optimized with a methanol-assimilating yeast Hansenula sp. MS-364, preserved by our laboratory. The maximum activity of the enzyme was obtained when the strain was cultivated at 30$circ$C for 24 hours in a medium containing methanol 3%(v/v), yeast extract 0.8%(w/v), K$_{2}$HPO$_{4}$, 0.1%(w/v), KH$_{2}$PO$_{4}$ 0.1%(W/V), MgSO$_{4}$, 7H$_{2}$O 0.05%(w/v), and the pH of the culture broth was adjusted at 5.0.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.115.1-115.1
• /
• 2016

Electrochemical anodization has been interested due to its useful way for the nano-scale architecture of metal oxides obtained from a metal substrate. By using this method, it is easy to control the morphology of the oxide materials by controlling electrochemical conditions. Among oxide materials obtained from the transition metals such as Ti, V, W, etc., in this paper, the morphological study of anodized $TiO_2$ was employed at various voltage conditions in fluoric based electrolyte, and the effects of applied voltage (sweep rate and retention time) on the tube morphologies were investigated. Furthermore, by using anodization of tungsten substrate (W), we fabricated the porous structure of $WO_3$ and provided merits of tailored structure for the hybridization of inorganic and organic materials as electrochromic (EC) applications. The hybrid porous $WO_3$ shows multi-chromic properties during the EC reactions at specific voltage conditions. From these results, the anodization process with tailoring nano-structure is one of the promising methods for EC applications.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.2
• /
• pp.97-116
• /
• 2004

Recently, e portion of on-line stock brokerage has been rapidly increased to be more than 50%, on the basis of contracted money. The usage of wCTS(Web Based Cyber Trading Systems) has now got into the steady state over the initial diffusion stage, which means wCTS has got more-than-half customer base in on-line service. Therefore, brokerage service providers have their competitive strategic focus on customer retention through the enhancement of customer loyalty. This study provides framework and survey results on explanation of wCTS user's loyalty, what and how factors affect wCTS user's loyalty. We adopt the results of early studies on information technology acceptance and diffusion such as TAM(Technology Acceptance Model) and IDT(Innovation Diffusion Theory). We also referred loyalty theory of marketing area and studios on CTS usage. We categorized explanation factors as three groups characteristics of users, characteristics of system, social environment. And we assumed that these three factors could affect the loyalty through two parameters : customer satisfaction and trust to the system. This study firstly shows that the ease of use and usefulness, the major factors of TAM. can also be applied to the loyalty of wCTS with resulting that the usefulness is more important than the ease of use In wCTS. Secondly, it shows that the innovative and risk-sensitive user has the lower degree of loyalty. Thirdly, it shows that the satisfaction and trust impact the loyalty simultaneously, the trust particularly impacts more strongly than the loyalty, due to the characteristics of monetary transaction in wCTS. This study provides meaningful results to the other on-line EC service fields as a first empirical research regarding the loyalty to wCTS which is a typical on-line EC service.