• 한국대기환경학회지
• /
• 제15권3호
• /
• pp.249-255
• /
• 1999

We sdudied effect of additives on catalytic activity in thermal catalytic de-NOx process which was composed of thermal reduction, catalytic reduction and catalytic oxidation stage. Pd-Pt/${\gamma}$-$Al_2O_3$ catalysts with the addition of transition metals(Co, Cu, Fe, Ni, W, Zn, Zr) and rare earth metals(Ce, Sr) were prepared by the conventional washcoating method. Those catalysts were characterized by CO pulse chemisorption, ICP, $N_2$ adsorption, SEM and XRD. The effect of catalyst additives on NOx removal for diesel emission was studied in thermal catalytic de-NOx process at reduction temperature(350~50$0^{\circ}C$), space velocity(5,000~20,000 $hr^{-1}$) and the engine load(0~120kW). The concentraton of CO, $CO_2$, NO and $NO_2$ in the exhaust gas increased with the engine load. On the other hand the concentration of $O_2$ decreased. The de-NOx activityof all prepared catalysts increased with respect to high CO and low $O_2$ level in the thermal reduction stage of the process. Insertion of Ce to Pt-Pd/${\gamma}$-$Al_2O_3$ catalyst showed the best activity of all the catalysts under these experimental conditions. De-NOx catalysts are effective to remove CO in addition to NOx in the catalytic reduction stage.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.49.2-49.2
• /
• 2011

$PbMoO_4$ nanoparticles were successfully obtained in the presence of ethylene glycol (EG) with the assistance of a prolonged sonication process. The nanoparticles were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), diffuse reflectance spectroscopy (DRS) and adsorption-desorption $N_2$ isotherms (BET). The catalyst prepared sonochemically showed higher photocatalytic activity than $PbMoO_4$ prepared by solid-state reaction in the degradation reactions of rhodamine B (rhB), indigo carmine (IC), orange G (OG), and methyl orange (MO) under UV-Vis light radiation. In order to elucidate aspects of the degradation mechanism of the organic dyes, some experimental variables were modified such as pH, $O_2$ level in solution, and radiation source. In general, the photocatalytic activity for the degradation of organic dyes followed the sequence IC>OG>rhB>MO.

• 공업화학
• /
• 제20권6호
• /
• pp.653-657
• /
• 2009

아산화질소($N_2O$)는 각종 화학산업의 제조공정은 물론 유기 및 화석연료의 각종 연소공정으로부터 배출되는 대표적 온실가스이다. 온난화 효과는 $CO_2$의 310배에 달하고 성층권에 도달해서는 오존층을 파괴하는 물질이지만 화학적으로 매우 안정하여 분해처리가 쉽지 않다. 각종 환원제를 이용한 SCR 반응도 대부분 $450^{\circ}C$ 이상의 높은 온도를 요구하며 NOx 존재시에는 활성이 현저하게 떨어지는 문제점을 가지고 있다. 본 연구는 $N_2O$ 분해촉매의 실용화를 위한 기초연구로 진행되었으며, hydrotalcite형 화합물 전구체로부터 얻어진 혼합금속산화물촉매(MMO)와 CO 환원제를 이용한 $N_2O$ 분해에서 $SO_2$ 및 $NH_3$ 등 성분이 촉매의 반응성과 내구성에 미치는 영향을 실험적으로 분석하여 실용화에 대비한 기본 자료로 삼고자 하였다. 본 실험에 사용된 MMO 촉매는 CO 환원제와 같이 사용할 경우 $N_2O$ 분해 성능이 크게 향상되어 $200^{\circ}C$ 근처에서도 완전히 분해되는 것으로 나타났다. 또한 $NH_3$ SCR에 의한 NOx 분해반응의 경우와 달리 $SO_2$ 영향이 치명적으로 나타나지 않았고, $NH_3$에 의한 효과도 미미하여 촉매의 활성점을 공유하는 불순물 성분 정도의 영향에 불과한 것으로 판단되었다.

• Horticulture, Environment, and Biotechnology : HEB
• /
• 제59권6호
• /
• pp.847-856
• /
• 2018

This research aimed to evaluate the effectiveness of hot water ($43-53^{\circ}C{\cdot}5min^{-1}$; $47^{\circ}C{\cdot}2-6min^{-1}$), 1-methylcyclopropene (1-MCP) at $50-300nL\;L^{-1}$ and a combination of hot water ($47/49^{\circ}C{\cdot}5min^{-1}$) and phosphite $40%\;P_2O_5+20%\;K_2O$;$40%\;P_2O_5+10%\;Zn$) in anthracnose control and the effect on fruit quality [fresh weight loss (FWL-%); pH, total soluble solids ($TSS-^{\circ}Brix$), and titratable acidity (TA = % citric acid (CA)] of passion fruit ( Passiflora edulis f. flavicarpa ) at the postharvest stage. When the fruits were in the stage of 0% dehydration and fully yellow peels, they were disinfested and inoculated with Colletotrichum gloeosporioides. They were then subjected to the above mentioned treatments; this was followed by incubation for 120 h. The diameter of the disease lesions was monitored daily. After the incubation, a physico-chemical analysis was performed. Hot-water treatment resulted in disease reduction at 47 and $49^{\circ}C$ for 4 and 5 min. The combination of hot-water treatment at $47^{\circ}C$ (4 or 5 min) and application of the phosphite of K or Zn significantly reduced disease severity in fruits. The 1-MCP treatment reduced anthracnose severity in passion fruit mainly at $200nL\;L^{-1}{\cdot} 24h^{-1} $. None of the treatments significantly changed the physico-chemical characteristics of the fruit [FWL (2.6-4.1%); pH (3.2-3.5), TSS ($8.9-10.9^{\circ}Brix$), and TA (1.8-2.5% CA)].

• 청정기술
• /
• 제24권3호
• /
• pp.212-220
• /
• 2018

순산소 연소기술은 화력발전에 적용 가능한 유망한 온실가스 감축 기술로 평가되고 있다. 본 연구는 환경적 관점에서 순환유동층을 활용한 순산소 연소조건에 로 내 탈황 및 탈질법을 적용하여 NO 및 $SO_2$의 거동을 살펴보는 한편, $SO_3$, $NH_3$, 그리고 $N_2O$의 발생 경향도 관측하였다. 이를 위해, 연소로 내 석회석 및 요소수를 투입하였다. 로 내 탈황법은 연소가스 내 $SO_2$ 농도를 ~403에서 ~41 ppm까지 저감하였다. 또한 $SO_3$ 형성의 주원료인 $SO_2$가 저감되면서 연소가스 내 $SO_3$ 농도도 ~3.9에서 ~1.4 ppm까지 감소되었다. 그러나 석회석 내 $CaCO_3$가 NO의 발생을 촉진하는 현상도 관측되었다. 연소가스 내 NO 농도는로 내 탈질법을 적용하여 ~26 - 34 ppm까지 저감되었다. 요소수 투입량 증가에 따라 연소가스 내 $NH_3$ 농도가 증가하여 최대 ~1.8 ppm으로 나타났으며, $N_2O$의 농도도 ~61에서 ~156 ppm까지 증가하였다. $N_2O$ 발생량 증가 현상은 요소수의 열분해 과정에서 생성된 HNCO가 $N_2O$로 전환되어 나타난다. 본 연구의 결과를 통해 로 내 연소가스 세정법을 적용할 경우 $NO_x$ 및 $SO_x$의 저감뿐만 아니라, 다른 오염물질의 발생에 대한 주의가 필요할 것으로 보인다.

• Journal of applied mathematics & informatics
• /
• 제16권1_2호
• /
• pp.19-35
• /
• 2004

We develop in this paper some preconditioners for sparse non-symmetric M-matrices, which combine a recursive two-level block I LU factorization with multigrid method, we compare these preconditioners on matrices arising from discretized convection-diffusion equations using up-wind finite difference schemes and multigrid orderings, some comparison theorems and experiment results are demonstrated.

• 센서학회지
• /
• 제19권3호
• /
• pp.176-183
• /
• 2010

It is considered that the urea injection DeNOx SCR(selective catalytic reduction) system is the only promising method to satisfy the worldwide NOx emission standards. As for the theoretical aspect, reactants of NO and $NO_2$ with $NH_3$ produce $H_2O$, $N_2$ and $O_2$ which do not harm human beings and environmental as well. The realization of maximum NOx conversion (without using a post oxidation catalyst) is only possible with closed loop controlled urea dosing. It means built-in $NH_3$ gas sensor have to be developed for detecting accurate $NH_3$ concentration for the feedback system. Using YSZ(yttria-stabilized zirconia) as a solid state electrolyte and $In_2O_3$ as a sensing material, this paper aims to study dependable $NH_3$ gas sensor for the promising solution of DeNOx technology, which have a reproducible electric output signal, a high sensitivity and fast response.

• 한국재료학회지
• /
• 제32권11호
• /
• pp.496-507
• /
• 2022

For the selective catalytic reduction of NOx with ammonia (NH₃-SCR), a V₂O₅WO₃/TiO₂ (VW/nTi) catalyst was prepared using V₂O₅ and WO₃ on a nanodispersed TiO₂ (nTi) support by simple impregnation process. The nTi support was dispersed for 0~3 hrs under controlled bead-milling in ethanol. The average particle size (D₅₀) of nTi was reduced from 582 nm to 93 nm depending on the milling time. The NOx activity of these catalysts with maximum temperature shift was influenced by the dispersion of the TiO₂. For the V_0.5W₂/nTi-0h catalyst, prepared with 582 nm nTi-0h before milling, the decomposition temperature with over 94 % NOx conversion had a narrow temperature window, within the range of 365-391 ℃. Similarly, the V_0.5W₂/nTi-2h catalyst, prepared with 107 nm nTi-2h bead-milled for 2hrs, showed a broad temperature window in the range of 358~450 ℃. However, the V_0.5W₂/Ti catalyst (D₅₀ = 2.4 ㎛, aqueous, without milling) was observed at 325-385 ℃. Our results could pave the way for the production of effective NOx decomposition catalysts with a higher temperature range. This approach is also better at facilitating the dispersion on the support material. NH₃-TPD, H₂-TPR, FT-IR, and XPS were used to investigate the role of nTi in the DeNOx catalyst.

• 한국인터넷방송통신학회논문지
• /
• 제17권3호
• /
• pp.159-166
• /
• 2017

본 논문은 홀수, 이중 짝수와 단일 짝수 마방진 알고리즘을 제안하였다. 홀수 마방진은 de la $Loub{\grave{e}}re$가 제안한 방법으로 $O(n^2)$회를 수행하는 단점이 있다. 이중 짝수 마방진은 2가지의 교차 알고리즘이 제안되었다. 단일 짝수 마방진은 ${\frac{n}{2}}{\times}{\frac{n}{2}}$의 홀수 마방진에 기반하여 여러 가지 방법이 제안되었지만 Strachey 알고리즘이 적용이 가장 쉽다. 본 논문에서는 홀수 마방진에 대해 3회 수행, 이중 짝수 마방진에 대해서는 4회 수행으로 마방진을 얻는 방법을 제안하였다. 또한, 단일 짝수 마방진에 대해서는 홀수 마방진에 기반을 두지 않고 직접 구하는 알고리즘을 제안하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2326-2333
• /
• 2015

Stator turn faults in permanent magnet synchronous motors (PMSMs) are more dangerous than those in induction motors (IMs) because of the presence of spinning rotor magnets that can be turned off at will. Condition monitoring and fault detection and diagnosis of the PMSM have been receiving a growing amount of attention among scientists and engineers in the past few years. The aim of this study is to propose a new detection technique of stator winding faults in a three-phase PMSM. This technique is based on the image analysis and recognition of the stator current Concordia patterns, and will allow the identification of turn faults in the stator winding as well as its correspondent fault index severity. A test bench of a vector controlled PMSM motor behaviors under short circuited turn in two phases stator windings has been built. Some experimental results of the phase to phase short circuits have been performed for diagnosis purpose.