• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.3-8
• /
• 1988

Nonstoichiometric solid solutions of the $Sr_{1+x}Dy_{1-x}FeO_{4-y}$ system (x = 0. 00, 0. 25, 0. 50, 0. 75 and 1. 00) with layered $K-2NiF_4$ type structure were prepared at 1200$^{\circ}$C under atmospheric pressure. X-ray powder diffraction spectra show that the crystallographic phases of the samples are tetragonal within the x range. Nonstoichiometric chemical formulas have been determined by Mohr salt analysis and it shows that the amount of $Fe^{4+}$ ion or ${\tau}$ value increases with increasing x. Electrical conductivities of the samples which were measured in the temperature range of $-100{\sim}200^{\circ}$C under atmospheric air pressure are varied within the semiconductivity range of $l0^{-8}{\sim}10^{-2}(ohm^{-1}{\cdot}cm^{-1}$) and the activation energies are also varied from 0.02 to 0.08 eV. Mixed valency state of $Fe^{3+}$ and $Fe^{4+}$ in the sample of $Sr_{1.00}Dy_{1.00}FeO_{4.04}$ was identified again by Mossbauer spectrum at 200K.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.403-404
• /
• 2005

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.628-635
• /
• 1999

Direct preparative method of 2,6-diformyl-p-cresol and 2-hydroxy-3-hydroxy-5-methylbenzaldehyde from 2,6-bis(hydroxymethyl)-4-methylphenol using activated $Mn(IV)O_2$ was described. Hexadentate compartmental Iigands, $H_4L[A]\;and\; H_4L[B]$ were prepared by condensation reactions of 2-hydroxy-3-hydroxy methyl-5-methylbenzaldehyde with ethylenediamine and 1,3-diaminopropane respectively. By the reaction of macrocycle($H_4[20]DOTA$) with Ln(III) nitrate {Ln(III)=Pr, Sm, Cd, Dy }, discrete mononuclear Ln(III) complexes of the type $[Ln(H_2[20]DOTA)(ClO_4)(H_2O)]\;{\cdot}\;3H_2O$ were synthesized in the solid state. $[Ln([20]DOTA)(NO_3)(H_2O)](NO_3)_2\;{\cdot}\;xH_2O$ was placed in methanol for 2 days, and $[Ln([20]DOTA)(NO_3)(CH_3OH)]^{2+}$ was formed. The equilibrium constants(K) for the substitution of coordinated $CH_3OH$ in the Ln-[20]DOTA complexes by various auxiliary ligand, $L_a$(=salicylic acid, p-chlorobenzoic acid, benzoic acid, acetic acid, 4-bromophenol) were determined spectroscopically at 25$^{\circ}C$ and 0.1M $NaClO_4$. The K values calculated were in the order of salicylic acid > p-chlorobenzoic acid > benzoic acid > acetic acid > 4-bromophenol, while pKa of auxiliary ligands was in the opposite trend.

• Korean Journal of Optics and Photonics
• /
• v.35 no.3
• /
• pp.115-120
• /
• 2024

Magneto-optical (MO) materials have attracted much attention, since they can be utilized for various optical applications, such as magnetic field sensors, optical current sensors, optical isolators, and optical circulators. In this study, alumino-borosilicate (ABS) glasses with high concentrations of Dy³⁺ ions were fabricated by a conventional melt-quenching technique, and the dependence of their thermal, optical, and magneto-optical properties on Dy³⁺ ion concentration was investigated. The MO property of the glasses was investigated by measurement of Faraday rotation at 1550 nm. The Faraday rotation angle increased linearly with the increase of Dy³⁺ ion concentration in the glasses. A very high Verdet constant of -6.86 rad/(T·m) was obtained for glass with a Dy³⁺ ion concentration of 30 mol%. In addition, the ABS-Dy glasses showed good thermal stability of greater than 128 ℃ against crystallization, and high optical transmission of 70% in the visible to near-infrared windows of 480-720, 1390-1560, and 1800-2400 nm. Due to the high Verdet constant and good thermal stability, the ABS-Dy glasses in this study could be candidate optical materials for MO device applications at 1550 nm.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.538-548
• /
• 2003

We studied effects by Re$_2$O$_3$(R=Dy, Gd, Ho) addition on the properties of Mn-Zn ferrite. The doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ceramics. With increasing the rare earth oxides, specific density and initial permeability increased on the whole. But, the tendencies such as upper result had the measured value on limitation and characteristics saturated or decreased properties after that. In case of excessive addition of additive beyond some level, initial permeability properties of ferrite have gone down in spite of anomalous grain. With increasing the content of additive, both the real and imaginary component of complex permeability and the magnetic loss (tan$\delta$) increased. Because the increased rate of real component had higher than imaginary component, magnetic loss increased none the less for increasing the real component related with magnetic permeability. But, the magnetic loss of ferrite doped with the rare earth oxides was lower than that of Mn-Zn ferrite at any rate. The small amount of present rare earth oxides in Mn-Zn ferrite composition led to enhancement of resistivity in bulk, and more so in the grain boundary. It was seem to be due to the formation of mutual reaction such as between iron ions and rare earth element ions.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1116-1117
• /
• 2006

Lanthanide tantalite $LnTaO_4$ (Ln= La, Nd, Sm, Dy, Er and Tm) was synthesized by a solid state reaction between mixed powders of $Ln_2O_3$ and $Ta_2O_5$. The single-phase $LnTaO_4$ was prepared by sintering at temperatures of 1423-1673 K in air. The SEM observation showed that the particles were provided with the growth steps and the depeloped facets. The photocatalytic activity for water splitting of $LnTaO_4$ prepared was measured under UV light irradiation. The activity obtained was higher than that previously reported. These results suggested the crystallinity of $LnTaO_4$ photocatalysts correlates closely with the efficiency of water splitting.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.4
• /
• pp.221-225
• /
• 2015

The sintering effect on the microstructure, electrical properties, and dielectric characteristics of ZnO-V₂O₅-MnO₂-Nb₂O₅-Dy₂O₃-based ceramics was investigated. With the increase of sintering temperature from 875 to 950℃, the density of the sintered pellets decreased from 5.57 to 5.45 g/cm³ and the average grain size increased from 4.3 to 10.9 μm. The breakdown field decreased noticeably from 6,095 to 996 V/cm with the increase of sintering temperature. The varistor ceramics sintered at 900℃ exhibited the best nonlinear properties: 39.2 in the nonlinear coefficient and 0.24 mA/cm² in the leakage current density. The dielectric constant increased sharply from 658.6 to 2,928.8 with the increase of sintering temperature. On the whole, the dissipation factor exhibited a fluctuation with the increase of the sintering temperature, and a minimum value of 0.284 at 900℃.

• Korean Journal of Materials Research
• /
• v.14 no.8
• /
• pp.529-534
• /
• 2004

$Sr_{4}Al_{14}O_{25}$ was synthesized by solid state reaction with flux. $H_{3}BO_3$ was used to synthesize $SrO-Al_{2}O_{3}$ phosphor system as a flux. The effect of doping system such as Eu+Dy, Eu, and Ce on the luminescent properties of $Sr_{4}Al_{14}O_{25}$ was investigated. Both PL spectra of $Sr_{4}Al_{14}O_{25}$:Eu and $Sr_{4}Al_{14}O_{25}$:Eu+Dy excited at 390 nm showed greenish-blue emission at about 490 nm, while the emission wavelength was shifted to 400 nm by doping Ce. The reduction of $Eu^{3+}$ ions to $Eu^{2+}$ could be accomplished by the annealing process under $N_{2}^{+}$ vacuum atmosphere, and attributed to the emission at 490 nm. It is verified that $Sr_{4}Al_{14}O_{25}$:Eu phosphor is suitable for white LEDs became of a broad absorption band peaking at 390 nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.260-260
• /
• 2013

Multiferroic materials have attracted much attention due to their fascinating fundamental physical properties and technological applications in magnetic/ferroelectric data-storage systems, quantum electromagnets, spintronics, and sensor devices. Among single-phase multiferroic materials, $BiFeO_3 $ is a typical multiferroic material with a room temperature magnetoelectric coupling in view of high magnetic-and ferroelectric-ordering temperatures (Neel temperature $T_N$~647 K and Curie temperature $T_C$~1,103 K). Rare-earth ion substitution at the Bi sties is very interesting, which induces suppressed volatility of Bi ion and improved ferroelectric properties. At the same time, Fe-site substitution with magnetic ions is also attracting, and the enhanced ferromagnetism was reported. In this study, $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$ (x=0, 0.05 and 0.1) bulk ceramic compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ or 24 h to produce $Bi_{1-x}Dy_xFe_{0.95}Co_{0.05}O_3$. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ nd sintered in air for 30 min. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies).

• 한국초전도학회:학술대회논문집
• /
• v.14
• /
• pp.43-43
• /
• 2004