• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.275-284
• /
• 2017

Rice quality should be considered as a primary consumer requirement. Regarding marketing, characteristics such as appearance, physicochemical properties, and palatability of brand rice are of high economic importance. Therefore, this study was conducted to select the optimal rice cultivars representing the commercial rice brands of Gyeongsangbuk-do province in Korea. Various rice grain quality components, grain appearance, several physicochemical properties of rice grain, and texture or palatability of cooked rice grains of ten cultivars (namely 'top quality rice') cultivated at three different locations, such as inland mountainous and southern plain areas of Gyeongsangbuk-do province in 2013~2014, were evaluated, and the obtained data was analyzed. 'Hiami' showed slightly higher protein contents and lower palatability of cooked rice than the other rice cultivars. Rice production and head rice yield produced at Gumi were the highest. The protein content of milled rice produced at Andong, an inland mountainous region, was approximately 0.3% point lower than that from other locations, whereas the amylose content of milled rice was approximately 1% point higher than those from the other plain regions, Daegu and Gumi. We evaluated the texture, Glossiness value determined using a Toyo teste meter and palatability of cooked rice of ten cultivars. The hardness of cooked rice produced in Andong was slightly lower than that produced in Daegu and Gumi, and additionally, the palatability of cooked rice produced in Andong was the best, followed by that producted in Gumi and Daegu. Considering rice yield and grain quality in the major rice cultivation areas of Gyeongsangbuk-do province, the rice cultivars that may be suitable for each region could be recommended mid-late maturation: 'Younghojinmi' and 'Mipum' in Daegu, 'Daebo', 'Samgwang', Chilbo' and 'Younghojinmi' in Gumi, 'Samgwang', 'Jinsumi' and 'Sukwang' in Andong. These results obtained in this study imply that the selected cultivars with high yield and quality could be recommended with high priority to rice farmers in the regions.

• Clean Technology
• /
• v.5 no.1
• /
• pp.49-61
• /
• 1999

Fenton's oxidation can improve the biodegradability of refractory organic wastewater by generating $OH{\cdot}$ which is one of the most reactive species. Fenton's reagent is used to treat a variety of industrial waste containing a range of toxic organic compounds. But this process cannot be economical because of high chemical cost of $H_2O_2$, ferrous ion solution and high sludge disposal cost. In this study, we proposed a modified Fenton's oxidation process which can reduce the reagent cost and obtain better removal efficiencies with less Fenton's reagents, and have a good potential of sludge recycling. In modified Fenton reaction, ferrous ion solution is adjusted to optimal pH with NaOH. Then it added to the sample and reacted to $H_2O_2$. For the experiment, synthetic wastewater made of phenol, which is one of the typical water pollutants, was used and the ionic strength of this wastewater was controlled by adding $NaHCO_3$. The effects of DO, ionic strength, and $H_2O_2$ dosing methods were investigated. As a result, modified Fenton's treatment efficiencies are better than conventional Fenton's reaction treating leachate and dyeing wastewater. And modified Fenton's treatment efficiencies combined to the sludge recycling for a half of Iron dosage are as good as the conventional Fenton's for a normal Iron dosage.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.175-184
• /
• 2021

Fold axis of fold, a representative ductile deformation structure, is important for collecting information on the 3D fold structure and the orientation of maximum horizontal principal stress at the time of deformation. For this reason, several fold axis measurement methods based on the fold-related structural elements have been suggested and used even in areas where it is impossible to measure it directly. Thus, these various measurement methods are briefly introduced here, and the measured data with different methods are compared to estimate these methods' reliability. For this purpose, we acquired fold axes at six sites across the Manhang formation of the Pyeongan supergroup and limestones of the Joseon supergroup in Danyang, Chungcheongbuk-do, where fold structures are well developed. The data from the different methods are generally consistent, indicating practical applicability. Most of the fold axes from the measured sites show NNNE or NE trends indicating WNW-ESE or NW-SE trending maximum horizontal principal stress, except for the one site with a WNW trend. The WNW-ESE trending fold axis might be related to a different orogeny or secondary folding. The minor difference in the trends between N-NNE and NE was interpreted as being due to different scale; however, further research is needed to confirm this.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.4
• /
• pp.158-165
• /
• 2010

Phytoplankton community structure is one of the indicators that can explain the enviromnental characteristics of coastal waters. In this study, phytoplankton community structure and water quality of aquaculture area were investigated for understanding regional enviromnental characteristics. Thirty stations in aquaculture areas of Tongyeong, southeast coast of Korea, were investigated monthly from January to December, 2009. Phytoplankton community, meteorologic dada and enviromnent factors including temperature, salinity, transparency, nutrients and chlorophyll a were also examined. Chaetoceros spp. and unidentified small flagellates were dominant species in all the year round. Pseudo-nitzschia spp., Dictyocha spp., and Nitzschia longissima were dominant in June to October being summer season, and Skeletonema costatum, Thalassiosira spp., Eucamphia zodiacus, Akashiwo sanguinea, Gymnodinium spp. and Asterionella japonicus appeared as dominant species in the rest of months. Dinoflagellate blooms occurred 3 times in near Hansan Bay and around Saryang-do, and the highest chlorophyll a was found in Hansan Bay. Species diversity of phytoplankton was lower in Hansan and Womnum Bay, and diatom was more abundant than dinoflagellates in Mireuk-do waters. These results showed that phytoplankton community varied by the seasonal and geographical characteristics, and recent increase of water temperature and heavy rain may affect on phytoplankton community structure.

• Journal of Soil and Groundwater Environment
• /
• v.10 no.4
• /
• pp.33-44
• /
• 2005

On the basis of a stepwise and careful integration of various field and laboratory methods the analysis of groundwater flow characterization was performed with five boreholes (BH-1, -2, -3, -4, -5) on a pilot site of Natural Forest Park in Guemsan-gun, Chungcheongbook-do, Korea. The regional lineaments of NW-SE are primarily developed on the area, which results in the development of many fractures of NW-SE direction around boreholes made in the test site for the study. A series of surface geological survey, core logging, geophysical logging, tomography, tracer tests, and heat-pulse flowmeter logging were carried out to determine fracture characteristics and fracture connectivity between the boreholes. In the result of fracture connectivity analysis BH-1 the injection well has a poor connectivity with BH-2 and BH-3, whereas a good with BH-4 and BH-5. In order to analyse the hydraulic connectivity between BH-1 and BH-5, in particular, a conspicuous groundwater outflux in the depth of 12 m and influx in the depth of 65 m and 70 m, but partly in/outflux occurred in other depths in BH-5 were observed as pumping from BH-1. On the other hand, when pumping from BH-5 the strong outflux in the depths of 17 m and 70 m was occurred. The spatial connectivity between the boreholes was examined in the depth of 15 m, 67 m, and 71 m in BH-1 as well as in the depth of 15 m, 17 m, 22 m, 72 m, and 83 m in BH-5.

• Journal of Mushroom
• /
• v.2 no.2
• /
• pp.69-75
• /
• 2004

This study was carried out to investigate effect of $CaCO_3$ treatment on cultivation of oyster mushroom for suppression of green mold disease and for promotion of mycelial growth to stabilize mushroom production in field and laboratory experiment. Treatment of $CaCO_3$ in PDA media promoted mycelial growth of mushroom and suppressed that of green mold. Addition of $CaCO_3$ in rice straw substrate increased mushroom mycelial growth compared with control. In that case, growth of green mold increased up to treated 0.6% $CaCO_3$ but decreased in treatment beyond 0.8% $CaCO_3$. There were some differences on effect of $CaCO_3$ treatment according to green mold species. Trichoderma longibrachiatum was effected but T. virens was not effected by treated $CaCO_3$. Differences among mushroom strains by treated $CaCO_3$ were not shown. It is confirmed that treatment of $CaCO_3$ can promote mushroom mycelial growth but it's not clear in the field. In the result of field test, treatment of $CaCO_3$ in rice straw substrates tended to increase yield and decrease incidence of disease compared with non-treatment. These results suggest that $CaCO_3$ treatment on cultivation of oyster mushroom can be applied to take preventive steps against of green mold disease.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.282-295
• /
• 2023

Background: Secretory leukocyte protease inhibitor (SLPI) protects tissues from proteases and promotes cell proliferation and healing. SLPI also reduces periodontal inflammation and alveolar bone resorption by inhibiting proinflammatory cytokine expression in rat periodontal tissues and osteoblasts. However, little is known of the role of SLPI in the expression of osteoclast regulatory factors from osteoblasts, which are crucial for the interaction between osteoblasts and osteoclasts. Therefore, we aimed to determine the effects of SLPI on the regulation of osteoclasts and osteoblasts in LPS-treated alveolar bone and osteoblasts. Methods: Periodontitis was induced in rats using LPS. After each LPS injection, SLPI was injected into the same area. Immunohistochemical analysis was performed with antibodies against SLPI, RANKL, OPG, and Runx2 in the periodontal tissue. RT-PCR and western blotting were performed to determine the expression levels of SLPI, RANKL, OPG, and Runx2 in LPS- and SLPI/LPS-treated MC3T3-E1 cells. SLPI/LPS-treated MC3T3-E1 cells were also stained with Alizarin Red S. Results: Immunohistochemical analysis showed that the expression levels of SLPI, OPG, and Runx2 were higher while that of RANKL was lower in the LPS/SLPI group relative to those in the LPS group. The mRNA and protein expression of SLPI, OPG, and Runx2 was higher in SLPI/LPS/MC3T3-E1 cells than in LPS/MC3T3-E1 cells, and RANKL expression was lower. During differentiation, OPG and Runx2 protein levels were higher whereas RANKL levels were lower in SLPI/LPS/MC3T3-E1 than in LPS/MC3T3-E1 cells on days 0, 4, 7, and 10. In addition, mineralization and matrix deposition were higher in SLPI/LPS/MC3T3-E1 than in LPS/MC3T3-E1 on days 7 and 10. SLPI decreased RANKL expression in LPS-treated alveolar bone and osteoblasts but increased the expression of OPG and Runx2. Conclusion: SLPI can be considered as a regulatory molecule that indirectly regulates osteoclast activation via osteoblasts and promotes osteoblast differentiation.

• Korean Journal of Microbiology
• /
• v.41 no.4
• /
• pp.239-245
• /
• 2005

Transformation-Associated Recombination (TAR) cloning technique allows selective isolation of chromosomal regions and genes from complex genomes. The procedure requires knowledge of relatively small genomic sequences that reside adjacent to the chromosomal region of interest. This technique involves homologous recombination during yeast spheroplast transformation between genomic DNA and a TAR vector that has 5' and 3' gene targeting sequences. In this study, we examined the effect of non-homologous spacing sequence in target hooks on homologous recombination using a plasmid model system. The efficiency of homologous recombination between the modified his3-TRP1-his3 fragments and HlS3 gene on plasmid were analyzed by the characterization of $Ura^+$ transformants. The numbers of $Ura^+$ transformant showed same level when seven different modified his3-TRP1-his3 fragments were used. But the percentage of positive recombinants. $Trp^+His^-$, dramatically decreased when used the modified his3-TRP1-his3 fragments contained incorrect spacing of nonhomologous region. As a result, we suggest that incorrect spacing inhibits the homologous recombination between target hook and substrate DNA. Therefore, we should consider the correct spacing in target hook when the target hook are used for cloning of orthologue gene.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.651-660
• /
• 2020

The purpose of this study was to create a phantom with a HU value similar to that of the human Femur using a 3D printer to replace the existing pig bone. A total of 372 people were analyzed to determine the HU value of human Femur. Using a 3D printer, a human bone model phantom was fabricated using PLA-Cu 20% and subjected to CT examination. Pig bones were 6 months old pigs, and bones 2 days after slaughter were used. As a result of the examination, the 3D printing phantom made with 80% of the internal filling showed a similar value to all data of the human body (p<0.05), and there was a difference from the pig bone (p>0.05). In addition, in the case of the HU value of Femur by age group, it was confirmed that the value of HU decreased as the age group increased (p<0.05). 3D printing and HU values confirmed a weak negative correlation with respect to the stacking height, but confirmed a strong positive correlation (R² = 0.996) with 182.13±1.290 in the inner filling (p<0.05). In conclusion, it was confirmed that the human body model phantom using 3D printing can exhibit a similar level of HU value to the human body compared to the existing pig bone phantom, and this study will provide basic data for the production of a human body model phantom using a 3D printer.

• Economic and Environmental Geology
• /
• v.28 no.3
• /
• pp.251-257
• /
• 1995

Three PEA (Pulverised Fuel Ash) samples, which were fresh, 17 and some 40 years weathered, were collected from two major British power plants. Batch leaching tests with these samples using distilled water and simulated industrial leachate showed higher amounts of element liberation from fresh ash, including Ca, Na, K, S (as $SO^{2-}_4$, $Cr_{total}$, Cu, Li Ni, Mo and CI and this seems to indicate their surface association and easier dissolution when contact with water. On the contrary Mg, Al, Ba, Si, V, As and Se do not show such readily leachable concentrations and these elements might be more associated with glass fraction in PFA particle rather than surface. Although element concentrations in the weathered ash are much lower than those in the initial leachate from the fresh ash, elements are still detected as resonable concentrations, with rather constant levels and this seems to demonstrate the element release from unstable glass phase of PFA particle. Fe, Ca, $Cr_{total}$, Cu, Ni, Zn and Hg were removed from the synthetic leachate by PFA and this is also confirmed by gain in solid PFA. The order of element retention is Meaford weathered ash > Drax weathered ash > Drax fresh ash in decreasing order and this conforms with the degree of weathering. Namely, the more wethered, the more wethered, the more effective in metal retention from the synthetic leachate.