• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.404-413
• /
• 2010

A study surveyed to visitors' expectation and satisfaction about trail in the Hanbat Arboretum by using Importance-Satisfaction Analysis (ISA). As the results of the research, the mean of importance was 3.85 and the mean of satisfaction was 3.67 in West Garden. Also the mean of importance was 3.99 and the mean of satisfaction was 3.78 in East Garden. Also appeared the evaluation factors of questionnaire the mostly importance that were higher than satisfaction. West Garden appeared necessary for items of safety features, drain facilities and board for risk area. Also East Garden appeared necessary for items of easy move for the wheelchair and carriage and safety features of trail. The research result are expected to provide clear path towards more effective adminstration and management tactics. Also expects with the research result that will be the possibility of raising the qualitative satisfaction of the visitor.

• Hwankyungkyoyuk
• /
• v.22 no.1
• /
• pp.12-30
• /
• 2009

The relationship between marine environmental improvement and environmental perception of the inhabitants was investigated. For this purpose, the seawater and bottom materials were analysed. Apart from this, the questionnaire surveys were also conducted around the Sun-so coastal area. In order to examine the improvement in the marine environment, 12 monitoring sites, which are located around Sun-so coast and can be divided into two parts such as inland (GW1-GW6) and outland (GW7-GW12) sea, were chosen. All the collected samples were analyzed to find out the quality of seawater (temperature, pH, salinity, dissolved oxygen: DO, chemical oxygen demand: COD and suspend solid: SS), nutrients (total nitrogen: TN and phosphate: $PO_4-P$) and bottom materials (COD, volatile solids: VS) as per the standard analytical procedures. In addition, the questionnaire mainly focused on the following three factors: 1) social economy, 2) dependent environmental awareness and 3) independent environmental awareness related with the environmental education. The monitoring studies indicated that the marine environment of the Sun-so coast showed various trends for analyzing parameter. No significant temporal changes in temperature, pH and salinity were observed. However, the other parameters showed decreasing (COD, SS, TN, $PO_4-P$ and VS) and increasing (DO) trends according to the quality of seawater and bottom materials. The questionnaire survey clearly showed that most of the residents in Sun-so recognized the improvement of marine environment as compared with the situation experienced in the past. The dredging project which is closely related with economic and living conditions of the local residents led to alter the environmental perceptions and attitudes. The survey also indicated that the inhabitants perceived the necessity of the environmental education (87% of respondents) and preferred regular schooling (55% of respondents) as effective and practical education methods.

• Nuclear Engineering and Technology
• /
• v.53 no.9
• /
• pp.3003-3011
• /
• 2021

A FAC (flow-accelerated corrosion) test was performed for a straight pipe composed of the SA335 Gr P22 and SA106 Gr B (SA106-SA335-SA106) types of steel with welds as a function of the flow rate in the range of 7-12 m/s at 150 ℃ and with DO < 5 ppb at pH levels ranging from 7 to 9.5 up to a cumulative test time of 7200 h using the FAC demonstration test facility. Afterward, the experimental pipe was examined destructively to investigate opposite effects as well as entrance effects. In addition, the FAC rate obtained using a pipe specimen with a 50 mm inner diameter was compared with the rate obtained from a rotating cylindrical electrode. The effects of the complicated fluid flows at the elbow and orifice of the pipeline were also evaluated using another test section designed to examine the independent effects of the orifice and the elbow depending on the distance and the combined effects on orifice and elbow. The tests were performed under the following conditions: 130-150 ℃, DO < 5 ppb, pH 7 and a flow rate of 3 m/s. The FAC rate was determined using the thickness change obtained from commercial room-temperature ultrasonic testing (UT).

• The Korean Journal of Mycology
• /
• v.41 no.3
• /
• pp.181-184
• /
• 2013

Rhodosporidium fluviale 201-C-1 and Kluyveromyces thermotolerans 150-JE-2(1) were isolated from wild flowers in Geumsan-gun, Chungcheongnam-do and Wando-gun, Jeollanam-do, respectively. Rhodosporidium paludigenum 86-J-1 and Candida sp. 80-J-3 were also isolated from flowers in Jeju island, Korea. Characteristics for these yeasts were not reported before. Therefore, morphological and physiological characteristics for these yeasts were investigated in this study. R. fluviale 201-C-1 was halophilic asporogenous yeast and formed pseudomycelium. It also grew at $30^{\circ}C$ and pH 4.0-6.0. K. thermotolerans 150-JE-2(1) was sugar-tolerant and halotolerant asporogenous yeast. It formed pseudomycelium and showed positive urease activity. Candida sp. 80-J-3 and R. paludigenum 86-J-1 were asporogenous yeasts, and grew well in yeast extract-peptone dextrose(YPD) medium, potato-dextrose medium as well as vitamin-free medium and YPD medium containing 5% NaCl.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.197-197
• /
• 2011

In this study, in contrast with cases in which Scanning Tunneling Microscopy (STM) tip-induced reactions were instigated by the tunneling electrons, the local electric field, or the mechanical force between a tip and a surface, we found that the tungsten oxide (WO3) covered tungsten (W) tip of a STM acted as a chemical catalyst for the S-H dissociative adsorption of phenylthiol and 1-octanethiol onto a Ge(100) surface. By varying the distance between the tip and the surface, the degree of the tip-catalyzed adsorption could be controlled. We have found that the thiol head-group is the critical functional group for this catalysis and the catalytic material is the WO3 layer of the tip. After removing the WO3 layer by field emission treatment, the catalytic activity of the tip has been lost. 3-mercapto isobutyric acid is a chiral bi-functional molecule which has two functional groups, carboxylic acid group and thiol group, at each end. 3-Mercapto Isobutyric Acid adsorbs at Ge(100) surface only through carboxylic acid group at room temperature and this adsorption was enhanced by the tunneling electrons between a STM tip and the surface. Using this enhancement, it is possible to make thiol group-terminated surface where we desire. On the other hand, surprisingly, the WO3 covered W tip of STM was found to act as a chemical catalyst to catalyze the adsorption of 3-mercapto isobutyric acid through thiol group at Ge(100) surface. Using this catalysis, it is possible to make carboxylic acid group-terminated surface where we want. This functional group-selective adsorption of bi-functional molecule using the catalysis may be used in positive lithographic methods to produce semiconductor substrate which is terminated by desired functional groups.

• ALGAE
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2005

Daily variation of phytoplankton community and environmental parameters were investigated at the lower Nakdong River (Mulgum) from January 2002 to December 2003 to investigate the dynamics of a phytoplankton community in detail. The daily results of water quality in this investigation showed pH (8.1 $\pm$ 0.7), DO (10.3 $\pm$ 2.7 $mg{\cdot}l^{-1}$), water temp. (18.8 $\pm$ 7.4°C), BOD (2.4 $\pm$ 1.0 $mg{\cdot}l^{-1}$), COD (5.3 $\pm$ 1.2 $mg{\cdot}l^{-1}$) and chl. a (43.5 $\pm$ 35.1 mg ${\cdot}m^{-3}$). The results of nutrient factors were the following: TN (3.1 $\pm$ 0.8 $mg{\cdot}l^{-1}$), NO3-N (2.5 $\pm$ 0.5 $mg{\cdot}l^{-1}$), TP (90 $\pm$ 48 ${\mu}g\;{\cdot}\;l^{-1}$), PO4-P (43 $\pm$ 30 ${\mu}g\;{\cdot}\;l^{-1}$). Dominant phytoplankton species during the study period were diatom (Stephanodiscus hantzschii, Aulacoseira granulata var. angustissima and A. italica) and cyanobacteria (Microcystis aeruginosa, Aphanizomenon flos-aquae). The small centric diatom, Stephanodiscus hantzschii, was repeatedly dominant from late fall to the following spring (mean and maximum cell density, 2.3 × 103 $\pm$ 3.8 × 103, 4.5 × 105 cells $ml^{-1}$, respectively). Pinnate diatom, Aulacoseira granulata var. angustissima and A. italica, were frequently observed all season except January to March. Cyanobacteria, Microcystis aeruginosa and Aphanizomenon flos-aquae, proliferated in summer of 2002 except in 2003 due to heavy precipitation. The dominant zooplankton species (March-early May) was rotifer (Brachionus, Keratella, Polyarthra) and cladocerans (Diaphanosoma). The daily observed dynamics of the phytoplankton community in the lower Nakdong River in this study may play an important role in increasing the detailed resolution of limnological information and serving as ecological data for future studies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.51-55
• /
• 2004

Generally, aggregate may limit the strength of concrete, and aggregate with undesirable properties including strength, shape and grading etc. cannot produce good concrete. Also, the properties of aggregate greatly affect the durability and structural performance of concrete. Recently, it has increased the using of crushed aggregate for concrete due to the exhaustion of good natural aggregate. In case of Korea, the using ratio of crushed stone occupies about 97％ of whole coarse aggregate, and ratio of crushed sand occupies about 18.3％ of whole fine aggregate. This is an experimental study to compare and analyze the properties of crushed sand for concrete in capital region and concrete according to the replacement ratio of crushed sand to do suitable mix design and improve the concrete quality. According to results, it was found that nearly all the properties of crushed sand satisfied with the value recommended by KS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.339-339
• /
• 2013

We study on the optical and electrical properties of indium-free ZTO(ZnSnO)/Ag/ZTO (ZAZ) multilayer electrodes for the low-cost transparent electrode. In the first step, each single layer was deposited using rf magnetron in-line sputter with various working pressure based on $O_2$/$Ar+O_2$ ratio (0~3%) and power at room temperature. Secondly, we studied the optical and electrical properties by analyzing the refractive index, extinction coefficient, transmittance and resistivity of each layer. Finally, we optimized the thickness of each layer using macleod simulation program based on the analyzed optical properties and fabricated the multilayer electrode. As a result, We achieved a low sheet resistance of $11{\Omega}$/sq and anaverage transmittance of 80% in the visible region of light (380~780 nm). This indicates that indium-free ZAZ multilayer electrode is a promising low-cost and low-temperature processing electrode scheme.

• Journal of Powder Materials
• /
• v.16 no.4
• /
• pp.249-253
• /
• 2009

3-D shape soft magnetic composite parts can be formed by general compaction method of powder metallurgy. In this study, the results on the high density nanostructured Fe-Si/Fe composite prepared by a warm compaction method were presented. Ball-milled Fe-25 wt.%Si powder, pure Fe powder and Si-polymer were mixed and then the powder mixture was compacted at various temperatures and pressures. Pore free density of samples up to 95% theoretical value has been obtained. The warm compacted sample prepared at 650 MPa and 240$^{\circ}C$ had highest compaction properties in comparison with other compacts prepared at 300, 400 MPa and room temperature and 120$^{\circ}C$. The magnetic properties such as core loss, magnetization saturation and coercivity were measured by B-H curve analyzer and vibration sample magnetometer.

• Journal of Powder Materials
• /
• v.18 no.4
• /
• pp.365-371
• /
• 2011

In this study, gradient porous Al-Cu sintered body was fabricated by powder metallurgy processing. Al-Cu powder mixtures were prepared by low energy ball milling with various milling time. After ball milling for 3h, the shape of powder mixtures changed to spherical type with size of 100~500 ${\mu}m$. Subsequently, Al-Cu powder mixtures were classified (under 150, 150~300 and over 300 ${\mu}m$) and compacted (20, 50 and 100 MPa). Then, they were sintered at $600^{\circ}C$ for various holding time (10, 30, 60 and 120 min) in $N_2$ atmosphere. The sintered bodies had 32~45% of porosity. As a result, the optimum holding time was determined to be 60 min at $600^{\circ}C$ and sintered bodies with various porosity were obtained by controlling the compacting pressure.