• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.4
• /
• pp.203-208
• /
• 2014

In this study, Sputtering method was used to grow Al-dopes ZnO films on a CIGS absorber layer, in order to examine the effect of TCO on properties of CIGS solar cell devices. Structural, electrical and optical properties were investigated by varied thickness of Al-dopes ZnO films. Also, relation to the application as a window layer in CIGS thin film solar cell were studied. It was found that the electrical and structural properties of ZnO:Al film improved with increasing its thickness. However, the optical properties degraded. Jsc of the fabricated CIGS based solar cells was significantly influenced by the variation of the ZnO:Al window layer thickness. Because ZnO:Al window layer is one of the Rs factors in CIGS solar cell. Rs has the biggest influence on efficiency characteristic. In order to obtain high efficiency of CIGS solar cell, ZnO:Al window layer should be fabricated with electrically and optically optimized.

• Journal of Powder Materials
• /
• v.18 no.6
• /
• pp.552-561
• /
• 2011

This study attempted to manufacture a Cu-15 at.%Ga coating layer via the cold spray process and investigated the effect of heat treatment environment on the properties of cold sprayed coating material. Three kinds of heat treatment environments, $5%H_2$+argon, pure argon, and vacuum were used in this study. Annealing treatments were conducted at $200{\sim}800^{\circ}C$/1 hr. With the cold sprayed coating layer, pure ${\alpha}$-Cu and small amounts of $Ga_2O_3$ were detected in the XRD, EDS, EPMA analyses. Porosity significantly decreased and hardness also decreased with increasing annealing temperature. The inhomogeneous dendritic microstructure of cold sprayed coating material changed to the homogeneous and dense one (microstructural evolution) with annealing heat treatment. Oxides near the interface of particles could be reduced by heat treatment especially in vacuum and argon environments. Vacuum environment during heat treatment was suggested to be most effective one to improve the densification and purification properties of cold sprayed Cu-15 at.%Ga coating material.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.101.1-101.1
• /
• 2010

$Cu(InGa)Se_2$ (CIGS) 태양전지는 박막형 태양전지 중 가장 높은 에너지 변환 효율이 보고 되고 있다. CIGS 태양전지를 제조하는 방법은 3 단계 동시 증착법, 금속 전구체의 셀렌화 공정법, 전기 증착법 등이 있다. 이 중 금속 전구체의 셀렌화 공정법은 다른 제조 방법에 비해 대면적 생산에 유리하고, 비교적 공정 과정이 간단하다는 장점이 있다. 하지만 금속 전구체의 미세구조 및 제조 방법, 셀렌화 공정의 최적화에 대한 연구가 부족하다. 본 실험에서는 후면전극으로 사용되는 Mo 층이 증착된 소다회 유리(soda-lime glass)를 기판으로 사용하였다. Cu-In(4:6), Cu-Ga(6:4) 타겟을 DC 스퍼터링 시스템을 이용하여 금속 전구체를 증착하였다. 이 후 미국 Delawere 대학교의 IEC 연구소와 한국전자통신연구원 (ETRI)에서 금속 전구체의 셀렌화 공정을 진행하였다. 셀렌화 공정 전후의 금속 전구체의 결정 크기와 미세구조의 변화를 관찰하기 위하여 주사전자현미경 (SEM)과 X선 회절 분석기 (XRD)를 사용하였다. 센렌화 공정이 진행된 금속 전구체 위에 버퍼층으로 사용되는 CdS와 전면전극으로 사영되는 ZnO, ITO 층을 합성한 후 에너지 변환 효율을 측정하였다. 최고 효율은 9.7%로 관찰되었다.

• Electrical & Electronic Materials
• /
• v.5 no.2
• /
• pp.175-181
• /
• 1992

Y-Ba-Cu-O계 보다 화학적 내구성이 좋은 Bi-Sr-Ca-Cu-O계 초전도체 wire를 중합 binder와 초전도체 파우더를 혼합하여 sol-gel법으로 제조하였다. 여러가지 혼합비와 열처리 조건하에서 제조한 wire의 특성분석 결과 Bi$_{2}$Sr$_{2}$Ca$_{2}$Cu$_{3}$O계 초전도체와 binder의 최적 혼합율은 22.25%이었고 가열비는 0.33.deg.C/min로 500.deg.C까지는 Ar gas와 $O_{2}$ gas분위기로 열처리하고 500.deg.C에서 835.deg.C까지는 $O_{2}$ gas분위기에서 40h동안 열처리하였을때 임계온도 98K를 갖는 초전도 선재를 얻을 수 있었다.

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.140-145
• /
• 1997

Carbon dioxide hydrogenation reaction was carried out over hybrid catalyst composed of $Cu/ZnO/ZrO_2$, and MFI zeolites such as HZSM-5, H-Ga-Silicate and H-Fe-Silicate. The hybrid catalyst composed of $Cu/ZnO/ZrO_2$, catalyst and HZSM-5 showed the highest yield and selectivity to $C_2{^+}$ hydrocarbon, which seemed to be due to the largest amount of Br nsted acid sites. Higher yield to $C_2{^+}$ hydrocarbon was obtained over HZSM-5 with lower $SiO_2/Al_2O_3$ ratio and also with longer ion exchange time, which showed larger amount of Br nsted acid sites, respectively. When a metal ion was exchanged into HZSM-5, the highest yield to $C_2{^+}$ hydrocarbon was obtained with descending order $Ga/HZSM-5{\simeq}HZSM-5>Zn/HZSM-5$, i.e., with the amount of $Br\ddot{o}nsted$ acid sites.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.109-112
• /
• 2005

Cu계$I-III-VI_2$화합물은 직접천이형 반도체로 광흡수계수가 매우 높아 박막형 태양전지 제조에 매우 유리하다 또한 화학적으로 안정하며 Ga, A1등을 첨가하면 에너지 금지대폭을 조절할 수 있어 Wide Bandgap 태양전지 및 탠덤구조 태양전지를 제조하기에도 용이하다. $CuInSe_2(CIS)$ 물질에서 In을 $20-30\%$ 정도 치환한 $Cu(In,\;Ga)Se_2(CIGS)$ 태양전지의 경우 $19.5\%$의 세계 최고 효율을 보고하고 있으며 이는 다결정 실리콘 태양전지의 효율과 비슷한 수준이다. 본 연구에서는 동시 진공증발법을 이용하여 증착한 CIGS 박막 및 $CuGaSe_2(CGS)$ 박막을 이용하여 태양전지를 제조하였다. 공정의 재현성 및 결정립계가 큰 광흡수층 제조를 위하여 실시간 기판 온도 모니터링 시스템을 도입하였으며 버퍼층으로는 용액성장한 CdS 박막을 사용하였다. SLG/MO/CIGS(CGS)/CdS/ZnO/Al구조의 태양전지를 제조하여 면적 $0.5cm^2$에서 각각 $15\%$(CIGS)와 $7\%(CGS)$의 효율을 얻었다.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.238-245
• /
• 2023

0.75(Bi_1/2Na_1/2)TiO₃-0.25SrTiO₃ (BNT-25ST) ceramics with high densities were successfully prepared at a sintering temperature of 1,000℃ by adding a mixture of 1 mol% CuO and 0.5 mol% Na₂CO₃ or 0.5 mol% CuO and 0.25 mol% Na₂CO₃. Double polarization-electric field (P-E) hysteresis curves and sprout-shaped bipolar strain-electric field (S-E) hysteresis curves with small negative strains were observed in the pristine and CuO-added BNT-25ST ceramics whereas the Na₂CO₃-added sample showed similar P-E and S-E curves to a typical ferroelectric. The pristine BNT-25ST ceramics showed an extremely large strain and a large-signal piezoelectric strain constant (d₃₃^*): 0.287 % at 80 kV/cm and 850 pm/V at 20 kV/cm. Similar values, 0.248 % at 80 kV/cm and 655 pm/V at 20 kV/cm, were obtained in the CuO-added sample. However, the pristine and CuO-added samples showed large hysteresis in unipolar S-E curves at an electric field of less than 20 kV/cm. The Na₂CO₃-added sample showed smaller values of the strain and d₃₃^* but displayed a linear change and small hysteresis in the unipolar S-E curve. The co-added sample with CuO and Na₂CO₃ displayed intermediate P-E and S-E hysteresis curves.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.4
• /
• pp.304-308
• /
• 2013

For the application to the window layer of $Cu(In,Ga)Se_2$(CIGS) solar cell, zinc oxide(ZnO) thin film was deposited at various temperatures by in-line pulsed DC sputtering. From the structural, optical, and electrical investigation and analysis, it was possible to obtain the lower thickness, the lower resistivity, and the higher transmittance at a higher process temperature. The energy band gap of ZnO was calculated using the transmittance data and was analyzed in terms of the dependency on temperature. From the X-ray diffraction(XRD) results, it was possible to conclude that a dominant peak was found about $34.2{\sim}34.6^{\circ}$(111) and crystallinity was obtained at a temperature above $150^{\circ}C$.

• New & Renewable Energy
• /
• v.1 no.2 s.2
• /
• pp.6-10
• /
• 2005

[ $CulnSe2$ ]계 화합물은 직접천이형 반도체로 광흡수계수가 매우 높아 박막형 태양전지 제조에 매우 유리하다. 또한 화학적으로 안정하며 Ga, Al 등을 첨가하면 에너지 금지대폭을 조절할 수 있어 Wide Bandgap 태양전지 및 탠덤구조 태양전지를 제조하기에도 용이하다. CIS 물질에서 In을 $20-30\%$ 정도 치환한 $Cu(In,\;Ga)Se_2(CIGS)$ 태양전지의 경우 19.5%의 세계 최고 효율을 보고하고 있으며 이는 다결정 실리콘 태양전지의 효율과 비슷한 수준이다. 본 연구에서는 동시 질공증발법을 이용하여 증착한 CIGS 박막 및 $CuGaSe_2(CGS)$ 박막을 이용하여 태양전지를 제조하였다. 공정의 재현성 및 결정립계가 큰 광흡수층 제조를 위하여 실시간 기판 온도 모니터링 시스템을 도입하였으며 버퍼층으로는 용액성장한 CdS 박막을 사용하였다. SLG/MO/CIGS(CGS)/CdS/ZnO/Al 구조의 태양전지를 제조하여 면적 $0.5cm^2$에서 각각 $17\%(CIGS)$와 $7\%(CGS)$의 효율을 얻었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.63-66
• /
• 2002

Bi-layer Mo films were deposited on sodalime glass substrates using DC magnetron sputtering. As the gas pressure and power density, the resistivity varied from $1.5{\times}10^{-5}$ to $4.97{\times}10^{-4}{\Omega}{\cdot}cm$. Furthermore, stress direction yielded compressive-to-tensile transition stress curves. The microstructure of the compressive stress films which had poor adhesion consists of tightly packed columns, but of the tensile-stressed films had less dense structure. Under all gas pressure conditions, Mo films exhibited distinctly increasing optical reflection with decreasing gas pressure. The expansion of (110) peak width with the gas pressure meant the worse crystalline growth. Also, The highest efficiency was 15.2% on 0.2 $cm^2$. The fill factor, open circuit voltage and short circuit current were 63 %, 570 m V and 42.6 $mA/cm^2$ respectively.