• Journal of the Korean institute of surface engineering
• /
• v.28 no.3
• /
• pp.142-151
• /
• 1995

In this research, a thin layer of Cr was coated on the pure Ni and Inconel 601 by PECVD (Plasma Enhanced Chemical Vapor Deposition) in order to study the effect of Cr on the oxidation behavior at high temperature. Cr coated Inconel 601, which was oxidized at $1100^{\circ}C$ for 24 hours, formed a protective $Cr_2O_3$ oxide layer and the resistance to isothermai oxidation was improved. On the other hand, oxidation resistance of Cr coated Inconel 601 at 100$0^{\circ}C$ was not significantly improved, probably due to the formation or insufficient $Cr_2O_3$ layer. But, when oxidized at $1000^{\circ}C$ and $1100^{\circ}C$ for 100 hours, Cr coated Inconel 601 improved isothermal oxidation resistance by the formation of continuous $Cr_2O_3$ external scale and by the development of $Al_2O_3$ subscales. Cr coated Ni formed inner layer of $Cr_2O_3$ within almost pure NiO, which provided additional cation vacancies, thus increasing the mobility of Ni ions in this region. It is believed that this doping effect resulted in an increase in the observed oxidation rate compared with pure Ni and did not improve the oxidation resistance.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.95-103
• /
• 2001

The properties of the detonation sprayed cermet coating are investigated through the mechanical, corrosion and erosion test. The test results are also compared with the properties of the substrate materials, STS 329J1, dual phase stainless steel and the plasma sprayed cermet coatings. The two kinds of carbide cermet power, WC+NiCr, Cr$_3$C$_2$+NiCr were used in this experiment. The experimental results showed that the anti-corrosive and anti-erosive properties of the detonation sprayed cermet coatings are superior to the plasma sprayed cermet coatings. The WC+NiCr cermet coating appears to be more effective than Cr$_3$C$_2$+NiCr cermet coating in abrasive erosion environment, whereas the Cr$_3$C$_2$+NiCr cermet coatings are more effective in cavitation erosion environment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2013

Mechanical alloying was carried out to produce $CrSi_2$ thermoelectric compound using a mixture of elemental $Cr_{33}Si_{67}$ powders. An optimal milling and heat treatment conditions to obtain the single phase of $CrSi_2$ compound with fine microstructure were investigated by X-ray diffraction and differential scanning calorimetry measurement. $CrSi_2$ intermetallic compound with a grain size of 70 nm could be obtained by MA of $Cr_{33}Si_{67}$ powders for 70 hours and subsequently annealed at $650^{\circ}C$. Consolidation of the MA powders was performed in a spark plasma sintering (SPS) machine using graphite dies at $600{\sim}1000^{\circ}C$ under 60 MPa. The shrinkage of MA samples during SPS consolidation process increased gradually with increasing temperature up to $1000^{\circ}C$ and relatively significant at about $600^{\circ}C$. We tend to believe that these behaviors are deeply related to form a $CrSi_2$ compound during heating process, as can be realized from the DSC measurement. Electrical conductivity and Seebeck coefficient of sintered bodies were measured up to $900^{\circ}C$. Seebeck coefficient and power factor of $Cr_{33}Si_{67}$ compact prepared by MA and SPS at $1000^{\circ}C$ showed the maximum value of $125{\mu}V/K$ at $400^{\circ}C$ and $4.3{\times}10^{-4}W/mK^2$ at $350^{\circ}C$, respectively.

• Journal of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.231-236
• /
• 1986

Oxidation of $[Mo_2O_4(C_2O_4)_2(OH_2)_2]^{2-}$ with hydrogen chromate yields the molybdenum (VI) complex, $[Mo_2O_4(C_2O_4)_2(OH_2)_2]^{2-}$. Stoichiometry for the reaction of $[Mo_2O_4(C_2O_4)_2(OH_2)_2]^{2-}$ with hydrogen chromate are expressed as ${3Mo_2}^V+2Cr^{VI}\;{\rightleftharpoons}\;{3Mo_2}_{VI}+2Cr^{III}$. Observed rate constants are dependent on $[H+]^2$. The kinetic data are consistent with a mechanism in which three successive single-electron steps convert $Cr^{VI}$to $Cr^{III}$ by way of intermediate Cr^V$ and $Cr^{IV}$. Mechanism of the reaction are presented and discussed.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.33-40
• /
• 1987

The investigation includes phase equilibria of Al2O3-HfO2 Cr2O3-ZrO2, Cr2O3-HfO2, Al2O3-Cr2O3-ZrO2, Al2O3-Cr2O3-HfO2, Al2O3-ZrO2-HfO2, Cr2O3-ZrO2-HfO2, Al2O3-Cr2O3-ZrO2-HfO2. In the systems the solubility near the end members has been studied at 1500$^{\circ}C$ and 1600$^{\circ}C$, respectively. Selective Compositions were investigated in the area of the guarternary system where the phae relation was examined.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.119-120
• /
• 2013

공구, 다이몰드 등에 널리 쓰이는 TiC, TiN, CrN, TiCrN, TiAlN 코팅의 산화특성을 비교하기 위하여 $600^{\circ}C-900^{\circ}C$에서 대기중 산화시험을 실시하였다. 내산화성은 (TiC, TiN), TiAlN, TiCrN, CrN 코팅의 순서로 증가하였다. 코팅원소중 Ti는 $TiO_2$로, Cr은 $Cr_2O_3$로, Al은 $Al_2O_3$로 산화되었다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.11
• /
• pp.1182-1186
• /
• 1997

La0.8Ca0.2Cr0.98O3 powder was prepared using the modified Pechini process. Various crystalline phases formed during thermal decomposition were investigated. (La,Ca)CrO4 phase, first formed from the precursor, was transformed to (La,Ca)CrO3 and CaCrO4 above 80$0^{\circ}C$, which remained up to 110$0^{\circ}C$. However, only (La,Ca)CrO3 phase consisting of orthorhombic and intermediate rhombohedral polymorphs was observed after sintering at 125$0^{\circ}C$. The specimens sintered at 140$0^{\circ}C$ exhibited 98% of relative density and rather wide grain size distribution with average grain size of 3-4 ${\mu}{\textrm}{m}$. Densification and grain growth of the specimens observed above 125$0^{\circ}C$ were presumably attributed to liquid phase sintering resulted from melting of Ca3(CrO4)2 phase.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.223-232
• /
• 2003

The co-precipitation method is applied to synthesize the cathode material Li[L $i_{x}$M $n_{1-x-y}$C $r_{y}$ ] $O_2$ for lithium rechargeable batteries at $650^{\circ}C$ (CR650) and 8$50^{\circ}C$ (CR850), respectively. Rietveld indices indicate that $R_{wp}$ with respect to $R_{exp}$ ( $R_{wp}$/ $R_{exp}$) are 9.2%/10.1% for CR650 and 15.9%/9.76% for CR850, respectively. $R_{B}$ and S (GofF) shows 10.9%, 8.54% and 1.9, 1.6, respectively. Rietveld structure refinement reveals that layer structure of LiMn $O_2$ (R3m) coexists with lower symmetry of Li[L $i_{1}$3/M $n_{2}$3/] $O_2$ (C2/c) due to superlattice ordering of Li and Mn in metal-transition containing layers. Unit-cell parameters are calculated as a=2.8520(2)$\AA$, c=14.248(2)$\AA$, V=100.40(l)$\AA^3$ for CR650, and a=2.8504(1)$\AA$, c=14.2371(7)$\AA$, V=100.179(8)$\AA^3$ for CR850. Final chemistry is obtained as Li[L $i_{0.35}$M $n_{0.56}$C $r_{0.09}$] $O_2$ (CR650) and Li[L $i_{0.27}$M $n_{0.61}$C $r_{0.13}$] $O_2$ (CR850), respectively.y...y..vely.y...y..

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.732-739
• /
• 2001

산업부산자원으로부터 유입되는 중금속이 시멘트 수화반응에 미치는 영향에 대하여 연구하였다. 출발물질은 순수시약을 사용하여 $C_3$S와 $C_2$S 조성으로 배합하고 여기에 Zn, Cu, Cr의 중금속 산화물을 1000ppm, 2000ppm, 3000ppm 첨가하여 150$0^{\circ}C$에서 1시간 소결하여 중금속의 고용분배, 결정구조, 용출상태 그리고 수화열을 관찰하였다. 중금속중 Zn는 $C_3$S와 간극질에 집중 고용되고 Cu는 간극물질에 집중 고용되며 Cr은 $C_3$S와 $C_2$S에 집중 고용되었다. 광학현미경 및 XRD 관찰결과 중금속 함량별로 $C_3$S와 $C_2$S의 결정상에는 큰 영향이 없는 것으로 나타났다. 그리고 7일간 수화시 Zn는 40~50%, Cu와 Cr은 전량 용출되었다. Conduction calorimeter 분석결과 중금속 함량별 변화에도 $C_3$S와 $C_2$S 수화열에는 차이가 없었다.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.5
• /
• pp.549-554
• /
• 1993

The CO substitution reactions in the complex, $Cp^*(C_5H_7)$CrCO with $PR_3(PR_3=PMePh_2,\;P(OCH_3)_3,\;PMe_2Ph)$ were investigated spectrophotometrically at various temperatures. For the reaction rates, it was suggested that the CO substitution reaction took place by first-order (dissociative) pathway. Activation parameters in decaline are ${\Delta}H^{\neq}= 21.99{\pm}2.4$ kcal/mol, ${\Delta}S^{\neq}= 8.9{\pm}7.1$ cal/mol·k. Unusually low value of ${\Delta}S^{\neq}$, suggested an ${\eta}^5-S{\to}\;{\eta}^5$-U conversion of the pentadienyl ligand. At various temperature, the rates of reaction for the Cp(pdl)CrCO complexes increase in the order $Cp^*(C_5H_7)$-CrCO < Cp$(C_5H_7)$CrCO < Cp(2,4-$C_5H_{11}$)CrCO, which can be attributed to the usual steric acceration or electronic influence for the ligand substitution of metal complexes. This suggestion was confirmed by the extended-Huckel molecular orbital (EHMO) calculations, which revealed that the energy of $[Cp^*(U-C_5H_7)Cr]^{\neq}$ transition state is about 4.93 kcal/mol lower than that of [Cp(S-$C_5H_7)Cr]^{\neq}$ transition state, and the arrangement of the overlap populations between Cr and the carbon of CO is $Cp^*(C_5H_7)$CrCO > Cp($C_5H_7$)CrCO > Cp(2,4-$C_7H_{11}$)CrCO.