• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.125-140
• /
• 2022

The Xiquegou Pb-Zn deposit is located at the Qingchengzi orefield which is one of the largest Pb-Zn mineralized zone in the northeast of China. The geology of this deposit consists of Archean granulite, Paleoproterozoinc migmatitic granite, Paleo-Mesoproterozoic sodic granite, Paleoproterozoic Liaohe group, Mesozoic diorite and Mesozoic monzoritic granite. The Xiquegou deposit which is a Triassic magma-hydrothermal type deposit occurs as vein ore filled fractures along fault zone in unit 3 (dolomitic marble and schist) of Dashiqiao formation of the Paleoproterozoic Liaohe group. Xiquegou Pb-Zn deposit consists of quartz, apatite, calcite, pyrite, arsenopyrite, pyrrhotite, marcasite, sphalerite, chalcopyrite, stannite, galena, tetrahedrite, electrum, argentite, native silver and pyrargyrite. Wallrock alteration of this deposit contains silicification, pyritization, dolomitization, chloritization and sericitization. Based on mineral petrography and paragenesis, dolomites from this deposit are classified two type (1. dolomite (D₀) as wallrock, 2. dolomite (D₁) as wallrock alteration in Pb-Zn mineralization quartz vein ore). The structural formulars of dolomites are determined to be Ca_1.03-1.01Mg_0.95-0.83Fe_0.12-0.02Mn_0.02-0.00(CO₃)₂(D₀) and Ca_1.16-1.00Mg_0.79-0.44Fe_0.53-0.13Mn_0.03-0.00As_0.01-0.00(CO₃)₂(D₁), respectively. It means that dolomites from the Xiquegou deposit have higher content of trace elements compared to the theoretical composition of dolomite. The dolomite (D₁) from quartz vein ore has higher content of these trace elements (FeO, PbO, Sb₂O₅ and As₂O₅) than dolomite (D₀) from wallrock. Dolomites correspond to Ferroan dolomite (D₀), and ankerite and Ferroan dolomite (D₁), respectively. The structural formular of chlorite from quartz vein ore is (Mg_1.65-1.08Fe_2.94-2.50Mn_0.01-0.00Zn_0.01-0.00Ni_0.01-0.00Cr_0.02-0.00V_0.01-0.00Hf_0.01-0.00Pb_0.01-0.00Cu_0.01-0.00As_0.03-0.00Ca_0.02-0.01Al_1.68-1.61)_5.77-5.73(Si_2.84-2.76Al_1.24-1.16)_4.00O₁₀(OH)₈. It indicated that chlorite of quartz vein ore is similar with theoretical chlorite and corresponds to Fe-rich chlorite. Compositional variations in chlorite from quartz vein ore are caused by mainly octahedral Fe²⁺ <-> Mg²⁺ (Mn²⁺) substitution and partly phengitic or Tschermark substitution (Al^3+,VI+Al^3+,IV <-> (Fe²⁺ 또는 Mg²⁺)^VI+(Si⁴⁺)^IV).

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.3
• /
• pp.223-234
• /
• 2019

The geology of the Samdeok Mo deposit consists of Paleozoic Hwajeonri formation, Kowoonri formation, Suchangri formation, Iwonri formation, Hwanggangri formation, Cretaceous, leucocratic porphyritic granite and granitic porphyry. This deposit consists of three quartz veins that filled NS oriented fractured zones in Suchangri formation. Quartz veins vary from 0.05 m to 0.3 m in thickness and extend to about 400 m in strike length. Quartz veins occur as massive, breccia, and cavity textures. Wallrock alteration has silicification, sericitization, argillitization and chloritization. The mineralogy of the quartz veins consists of quartz, fluorite, white mica, biotite, apatite, monazite, rutile, ilmenite, molybdenite, chalcopyrite, Fe-Mg-Mn oxide and Fe oxide. White mica from Samdeok Mo deposit occurs as fine or coarse grains in quartz vein and hostrock and has four mineral assemblages (I type: quartz, molybdenite, Fe oxide and Fe-Mg-Mn oxide, II type: quartz, Fe oxide and Fe-Mg-Mn oxide, III type: quartz and biotite, and IV type: quartz). The structural formular of white mica from quartz vein is $(K_{0.89-0.60}Na_{0.05-0.00}Ca_{0.01-0.00}Sr_{0.02-0.00})_{0.94-0.62}(Al_{1.54-1.12}Mg_{0.36-0.18}Fe_{0.26-0.09}Mn_{0.04-0.00}Ti_{0.02-0.00}Cr_{0.02-0.00}Zn_{0.01-0.00})_{1.91-1.72}(Si_{3.40-3.11}Al_{0.92-0.60})_{4.00}O_{10}(OH_{1.68-1.42}F_{0.58-0.32})_{2.00}$, but white mica of I type has higher FeO content, and lower $SiO_2$ and MgO contents than white micas of other types. Also, compositional variations in white mica from the Samdeok Mo deposit are caused by phengitic or Tschermark substitution ($(Al^{3+})^{VI}+(Al^{3+})^{IV}{\leftrightarrow}(Fe^{2+}{\text{ or }}Mg^{2+})^{VI}+(Si^{4+})^{IV}$) and direct $(Fe^{3+})^{VI}{\leftrightarrow}(Al^{3+})^{VI}$ substitution.

• Journal of Korean Society on Water Environment
• /
• v.37 no.4
• /
• pp.306-314
• /
• 2021

The application of organic fertilizer could be accompanied by potential hazards to soil and humans due to trace metals. Livestock manure compost·liquefied fertilizer is a well-established approach for the stabilization of nutrients and the reduction of pathogens and odors in manures, which can be evaluated as compost·liquefied. In this study, the livestock manure compost·liquefied fertilizers produced at 333 liquid manure public resource centers and liquid fertilizer distribution centers were collected from May to December 2019. The nutrient content (nitrogen, phosphorus, and potassium), physicochemical properties, and heavy metal content were investigated. The livestock manure compost·liquefied fertilizer was measured using a mechanical maturity measurement device. The organic matter, arsenic, cadmium, mercury, lead, chromium, copper, nickel, zinc, E. coli (O157:H7), Salmonella, etc. of the livestock manure compost·liquefied fertilizers were analyzed. The average heavy metal content in the livestock manure compost·liquefied fertilizer was as follows: Cr 2.9 mg/kg (0.2~8.7 mg/kg), Cu 20.4 mg/kg (1.6~74.1 mg/kg), Ni 1.3 mg/kg (0.4~4.2 mg/kg), and Zn 79.8 mg/kg (3.0~340.7 mg/kg). Although large-scale organic fertilizer plants and resources recycling centers produce good organic (liquid) fertilizers with proper components, it is necessary to standardize livestock manure compost·liquefied fertilizer in order to facilitate efforts to turn livestock manure into useful resources.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.393-398
• /
• 2012

We investigated the changes in chemical properties of paddy field soils at 300 different sampling sites containing 4 topography in Jeonbuk province, Korea. The soil samples were collected 43.0% from local valley and fans, 39.3% from fluvio-marine deposits, 15.0% from alluvial plains, and 2.7% from diluvium sites. The optimal values of soil properties in the total soil samples were as follows: 65.3% of total samples in soil pH value, 48.3% of total samples in cation exchange capacity (CEC) value, and 22.3% of total samples in available phosphorus content, whereas the deficient values of soil properties were 63.3% of total samples in soil organic matter (SOM) content, 75.7% of total samples in available silicate content, and 61.3%, 51.0%, and 59.3% of total samples in exchangeable $K^+$, $Ca^{2+}$, and $Mg^{2+}$ concentrations, respectively. There were different soil types in the paddy fields: that is, 34.4% immature paddy and 33.6% sandy paddy in the local valley and fans, 57.8% sandy paddy in the alluvial plains, 47.4% normal paddy in the fluvio-marine deposits, and 75.7% immature paddy in the diluvium. Soil textures were also different: 53.5% loam in the local valley and fans, 37.8% sandy loam in the alluvial plains, and 55.1% silty loam in the fluvio-marine deposits. Soil pH and SOM contents were not different among the different topographical sampling sites. However, the mean value of available phosphorus content, 224 mg $kg^{-1}$, was exceeded optimal values in the diluvium. The contents of exchangeable cations were optimal in all the sites, except exchangeable $Ca^{2+}$ contents in the local valley and fans. The contents of available silicate ranged between 112 and 127 mg $kg^{-1}$ in all the sites, which were lower than optimal value. In addition, soil pH values were proportionally correlated to the order of available silicate, exchangeable $Ca^{2+}$, $Mg^{2+}$, $Na^+$, CEC, and exchangeable $K^+$. The contents of SOM were proportionally correlated to the order of CEC, available $P_2O_5$, exchangeable $Ca^{2+}$, and available silicate. The contents of heavy metals, Cd, Cr, Cu, Ni, Pb, and Zn, were only 10% of the threshold levels of the metals, and As content was about 20 to 30% of the threshold level.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.5
• /
• pp.45-51
• /
• 2007

This study was carried out to investigate various heavy metal contents in packaging papers by pre-treatments for ICP-ES (Inductively Coupled Plasma Emission Spectrometry) analysis. Pre-treatment methods of heavy metals in this study include extraction, migration and decomposition methods (dry ashing, $HNO_3-HClO_4-HF,\;HNO_3,\;and\;H_2SO_4-HNO_3$). Test results were compared with conventional extraction (water) and migration (3% acetic acid) methods. The five representative heavy metals (Cd, As, Pb, Cr and Hg) were analyzed. For Cd, Hg, and As, the results were below detection limit of the instrumental technique. It was considered that the migration test was a better method compared to extraction test, but all the decomposition methods showed much higher detection values than the extraction or migration test. In case of recycled corrugated containers, 3% acetic acid solution extracted about 25% of chromium and 30% of lead compared to the content by decomposition methods. Among all decomposition methods, the nitric acid - perchloric acid - hydrofluoric acid treatment brought a slightly higher detection value than others, but there was no significant difference among them except sulfuric acid - nitric acid method.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.1
• /
• pp.26-33
• /
• 1988

To investigate the effects of paper sludge on the growth response of paddy rice, paper sludge was applied to pots at the rate of either 300, 600, 900 or 1,200 kg/l0a which was either preadjusted at a C/N ratio of 30 : 1 or not adjusted. The effects were compared with those of the control. 1. Plant heights, number of tillers and dry weight were significantly reduced with the increasing application of paper sludge in the early stages of rice growth, whereas opposite results were observed after the heading stage when treated with C/N ratio preadjusted paper sludge. 2. The uptake of $N,P_2O_5,K_2O$ and $SiO_2$ by rice plants grown in paper sludge treated soil was significantly reduced in the early stages of rice growth. Conversely, uptake was enhanced in the C/N ratio preadjusted plot in the young panicle formation stage. 3. Zn, Cu and Cd content in rice straw was in the range of $39{\sim}101$, $0{\sim}0.11$ and $0.03{\sim}0.14ppm$, respectively, and Pb and Cr in rice straw were not detected at all. However, there was no difference in the content of all these heavy metals in rice straw irrespective of treatment.

• Journal of Powder Materials
• /
• v.23 no.5
• /
• pp.397-401
• /
• 2016

A lean alloy is defined as a low alloy steel with a minimum amount of the alloying element that maintains the characteristics of the sintered alloy. It is well known that the addition of elements such as Cr, P, Si, or Mn improves the mechanical characteristics of the alloy, but decreases the sinterability. The mother alloy is used to avoid an oxidation reaction with the alloying elements of Cr, P, Si or Mn. The purpose of this study is to determine the change in the mechanical properties of Fe-P-Mo and Fe-P-Mn alloys as a result of the addition of Si. In this article, the Fe-P-Mo and Fe-P-Mn alloys to which Si is added are compacted at $7.0g/cm^3$ and then sintered in $H_2-N_2$ at $1120^{\circ}C$. The P around the macropores and large grains reduces due to the formation of $SiO_2$ as the Si content increases. This is caused by the increase in strength owing to reducing intergranular fracture by suppressing the reaction with oxygen.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.21-29
• /
• 2018

The contents of total nitrogen(T-N), phosphate($T-P_2O_5$), and potash($T-K_2O$) are important factors to determine the application rate of the livestock compost to prevent nutrients accumulation and maintain their appropriate levels in arable lands. The concentrations of nutrient, organic matter, salt, water content, heavy metal in livestock compost in circulation were investigated with 659 samples from 2016 to 2017. In order to investigate the fluctuation nutrient contents of livestock composts with the same product name, 19 samples were collected and analyzed T-N, and $T-P_2O_5$, and $T-K_2O$ concentration during two years. The mean levels of T-N, $T-P_2O_5$, and $T-K_2O$ in livestock composts of from 2016 to 2017 were 1.73%, 1.88%, and 1.66%, respectively. The average contents of organic matter, water, and salt were 38.9%, 40.9%, and 1.2%, respectively. There were found that the maximum concentrations of Cr, Ni, Cu, and Zn in some livestock composts were exceeded the criteria of the official standard of commercial fertilizer. The maximum variation coefficient of T-N, $T-P_2O_5$ and $T-K_2O$ content of livestock composts was found to be 24%, 27%, and 50% on average, respectively. In order to manage the nutrients in agricultural soils, it will be reasonable that the error range of T-N and $T-P_2O_5$ content in livestock composts should be recommended to be 27% in mean as variation coefficient in case of displaying the nutrient element in liverstock compost.

• Corrosion Science and Technology
• /
• v.9 no.1
• /
• pp.20-28
• /
• 2010

According to the bipolar model, ion selectivity of some species in the passive film is important factor to control the passivation. An increase of cation selectivity of outer layer of the passive film can stabilize the film and improves the corrosion resistance. Therefore, the formation and roles of ionic species in the passive film should be elucidated. In this work, two types of solution (hydrochloric or sulfuric acid) were used to test high N and Mo-bearing stainless steels. The objective of this work was to investigate the formation of oxyanions in the passive film and the roles of oxyanions in passivation of stainless steel. Nitrogen exists as atomic nitrogen, nitric oxide, nitro-oxyanions (${NO_x}^-$), and N-H species, not nitride in the passive film. Because of its high mobility, the enriched atomic nitrogen can act as a reservoir. The formation of N-H species buffers the film pH and facilitates the formation of oxyanions in the film. ${NO_x}^-$ species improve the cation selectivity of the film, increasing the oxide content and film density. ${NO_x}^-$ acts similar to a strong inhibitor both in the passive film and at active sites. This facilitates the formation of chromium oxide. Also, ${NO_x}^-$ can make more molybdate and nitric oxide by reacting with Mo. The role of Mo addition on the passivation characteristics of stainless steel may differ with the test environment. Mo exists as metallic molybdenum, molybdenum oxide, and molybdate and the latter facilitates the oxide formation. When nitrogen and molybdenum coexist in stainless steel, corrosion resistance in chloride solutions is drastically increased. This synergistic effect of N and Mo in a chloride solution is mainly due to the formation of nitro-oxyanions and molybdate ion. Oxyanions can be formed by a 'solid state reaction' in the passive film, resulting in the formation of more molybdate and nitric oxide. These oxyanions improve the cation selectivity of the outer layer and form more oxide and increase the amount of chromium oxide and the ratio of $Cr_2O_3/Cr(OH)_3$ and make the film stable and dense.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.158-164
• /
• 1996

This survey was conducted to investigate the distribution of heavy metal contents in medicinal plants and soils. Plant and soil samples were collected at 254 sites(Angelica gigas : 81, Astragalus membranceus : 38, Platycodn glandiflorum : 36, Paeonia albilora : 34, Codonopsis lanoceolata : 32, Ligusticum chuanxiong : 17, Bupleurum falcatum : 16, respectively) over the country, Soil texture, pH values and heavy metal content of soils and medicinal plants were evaluated as major factors. Soil texture classification showed that sandy loam, loam, loamy sand and silt loam were 46.1%, 26.0%, 19.3% and 8.6% of the total, respectively. The contents of O.M, Ex.Ca. Ex.Mg and EC value were higher in loamy(sandy loam, loam and silt loam)soils than in sandy(loamy sand)soils, but available $P_2O_5$ contents of loamy sand soils were higher than those of sandy loam, loam, and silt loam. The contents of Cd, Cu, Pb, Zn and Ni in soil were high in loamy soils, while Cr content was high in loamy silt soils. The contents of Cu and Cr in Angelica gigas were high in loamy soils, and those of Pb in Astragalus membranceus, Paeonia albiflora and Codonopsis lanoceolata were high in sandy loam soils. Correlation coefficients between heavy metal contents in medicinal plants and their soils with soil texture were positively correlated in sandy loam and loam at Cu, loam at Zn, sandy loam, loam and loamy sand at Cr, respectively. Correlation coefficients between pH value of the soils and contents of Cd, Zn and Ni in medicinal plants were negatively correlated, but those of Cd, Pb, Zn and Ni in soils were positively correlated.