• Journal of Magnetics
• /
• 제11권1호
• /
• pp.51-54
• /
• 2006

Variation of magnetic properties through Cr substitution for Co in inverse-spinel $CoFe_2O_4$ has been investigated by vibrating-sample magnetometry (VSM) and conversion electron $M\ddot{o}ssbauer$ spectroscopy (CEMS). $Cr_{x}Co_{1-x}Fe_2O_4$ samples were prepared as thin films by a sol-gel method. The lattice constant of the $Cr_{x}Co_{1-x}Fe_2O_4$ samples was found to remain unchanged, explainable in terms of a reduction of tetrahedral $Fe^{3+}$ ion to $Fe^{2+}$ due to substitution of $Cr^{3+}$ ion into octahedral $Co^{2+}$ site. The existence of the tetrahedral $Fe^{2+}$ ions in $Cr_{x}Co_{1-x}Fe_2O_4$ was confirmed by CEMS analysis. Room-temperature magnetic hysteresis curves for the $Cr_{x}Co_{1-x}Fe_2O_4$ films measured by VSM revealed that the saturation magnetization $M_s$ increases by Cr doping. The $M_s$ is maximized when x = 0.1 and decreases for higher x but is still bigger than that of $CoFe_2O_4$. The increase of $M_s$ can be explained partly by the reduction of the tetrahedral $Fe^{3+}$ ion to $Fe^{2+}$.

• 열처리공학회지
• /
• 제11권3호
• /
• pp.186-191
• /
• 1998

An oxidation behavior of 304 and 316 stainless steels were studied in dry air. After solution treatment, specimens were polished up to $1{\mu}m$ $A1_2O_3$ grade and then subjected to oxidation treatment in dry air at $800^{\circ}C{\sim}1200^{\circ}C$. The oxidation behavior between matrix and oxide scale was analyzed with SEM, EDS and XRD. When oxidation treatment was conducted at $1200^{\circ}C$, large thickness of Fe oxide scale was formed on top of surface and fine $(Cr,Fe)_2O_3$ oxide film was formed below it. Cr rich zone existed at interface between metal and $(Cr,Fe)_2O_3$ oxide layer, and it was believed that this zone acted as obstacle to oxidation. Most of Ni was detected at the interface between metal and $(Cr,Fe)_2O_3$ and also detected at the interface between $Fe_2O_3$ and $(Cr,Fe)_2O_3$.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.854-858
• /
• 2010

In this study, we have investigated the effects of Cr dopant on the sintering and electrical properties of ZnO-$Sb_2O_3$ (ZS) ceramics for varistor application. Spinel phases including $\alpha-$ and $\beta$-type was formed at ZS system and $\alpha$-spinel was stabilized by Cr doping in ZS system. Densification of ZS and ZSCr system was retarded to $1000^{\circ}C$ by the formation of spinel at $800^{\circ}C$. The morphology and its distribution of spinel phases in ZS system was homogeneous but disturbed by Cr doping. In ZSCr the densification of ZnO compared with ZS system was more retarded by low concentration of Zn interstitial defects induced by Cr doping in addition to the effect of spinel phase formation. The defects in each system were identified as attractive coulombic center (ZS: 0.13 eV, ZSCr: 0.12 eV) and singly charged oxygen vacancy $V_0^{\cdot}$ (ZSCr: 0.33 eV). In all ZS and ZSCr system have week varistor behavior by the formation of double Schottky barrier at grain boundary but its stability of barrier was very sensitive to sintering temperature.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.687-693
• /
• 2006

Chromium(III) complexes, cis-[Cr([14]-decane)$(HOC _6H _4COO) _2$]$ClO _4$ I and cis-[Cr([14]-decane)(OH) $(OC _6H _4NO _2)$]$ClO _4{\cdot}H _2O$ II ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) are synthesized and structurally characterized by a combination of elemental analysis, conductivity, IR and VIS spectroscopy, and X-ray crystallography. The complexes crystallizes in the monoclinic space groups, $C2 _1$/a in I and $P2 _1$/n in II. Analysis of the crystal structure of complex I reveals that central chromium(III) ion has a distorted octahedral coordination environment and two hydrogensalicylato ligands are unidentate to the chromium(III) ion via the carboxyl groups in the cis-position. For monomeric complex I the hydrogensalicylato coordination geometry is as follows: Cr-O(average) = 1.984(3) $\AA$;Cr-N range = 2.105(3)-2.141(4) $\AA$;C(24)-O(4) = 1.286(5) $\AA$;N(2)-Cr-N(4) (equatorial position) = 96.97(15)${^{\circ}}$; N(1)-Cr-N(3) (axial position) = 168.27(15)${^{\circ}}$; O(1)-Cr-O(4) = 85.70(13)${^{\circ}}$. The crystal structure of II has indicated that chromium(III) ion is six-coordinated by four secondary amines of the macrocycle, hydroxide anion and nitrophenolate anion.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.23-27
• /
• 2006

역스피넬 산화물 $CoFe_2O_4$에서 Co를 Mn 또는 Cr클 치환하여 얻어지는 $Mn_xCo_{1-x}Fe_2O_4$ 및 $Cr_xCo_{1-x}Fe_2P_4$ 박막시료 들을 졸-겔 방법을 이용하여 제작하고 그 구조적, 자기적 특성들을 비교분석 하였다. X-ray diffraction 측정 결과, Mn 치환의 경우는 치환량의 증가에 따라 격자상수가 증가하였지만 Cr치환의 경우는 격자상수가 거의 변화하지 않음이 관측되었다. 이와 같은 결과는 Mn 치환의 경우 팔면체 자리의 Co이온과 같은 원자가 +2를 가지게 되는 것으로 설명 가능하며 Cr치환의 경우는 +3을 가지게 되어 같은 양의 $Fe^{3+}$이온들의 $Fe^{2+}$로의 환원이 발생하는 것으로 설명되어질 수 있다. $Cr_Co_{1-x}Fe_2O_4$박막들에 대한 Mossbauer 스펙트럼 측정 결과 사면체 자리에 $Fe^{2+}$이온의 존재가 관측되었으며 이는 $Cr^{3+}$이온의 팔면체 자리 치환에 의하여 야기되는 사면체 자리의 $Fe^{3+}{\rightarrow}Fe^{2+}$ 환원에 의한 것으로 해석된다. 반면에 $Mn_xCo_{1-x}Fe_2O_4$ 박막들에 대한 Mossbauer스펙트럼 측정 결과, $Fe^{2+}$ 이온의 존재는 관측되지 않았으며 Mn 치환량이 큰 경우 (>0.47)팔면체 자리의 $Fe^{3+}$이온들의 사면체 자리로의 이동이 관측되었다. 박막들에 대한 진동시료자화(vibrating sample magnetometry)측정 결과, Mn, Cr 치환의 경우 모두 $CoFe_2O_4$와 비교하여 포화자화량이 증가함이 나타났으며 치환에 관여한 이온들 간의 스핀 자기 능률 크기의 비교를 통하여 그 정성적인 설명이 가능하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.419-422
• /
• 2000

This paper was to measure the structure, piezoelectric properties of 0.05Pb($A1_{0.5}$$Nb_{0.5}$)-0.95Pb($Zr_{0.52}$$Ti_{0.48}$)$O_3$ ceramics dopped with additive after creating the specimens with a general method. It is shown that X-ray diffraction pattern variation of lines (200) have tendency to move in simple peak by addition of additive. According to the increase of $Cr_2$$O_3$, tetragonality hardly have variation, according to the increase of $Fe_2$$O_3$, tetragonality decreased on the whole. According to dopping with $Cr_2$$O_3$ and $Fe_2$$O_3$, electromechanical factor(kp) largely increased, in case of sintering at $1200^{\circ}C$ kp was maximum value of 40.04[%] at $Cr_2$$O_3$ 0.3wt%, and maximum value of kp 42.9 [%] at $Fe_2$$O_3$, 0.9wt%. In case of sintering at 120$0^{\circ}C$, mechanical duality factor(Qm) was maximum value of Qm 268.8 at $Cr_2$$O_3$, 0.9 wt%.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1245-1252
• /
• 1999

The sliding wear behavior of $Al_2O_3/NiCr$ coating deposited on steel(SM45C) was investigated under lubrication. The parameters of sliding wear are normal loads, coating thickness. As a result, the wear resistance of $Al_2O_3/NiCr$ coating was remarkably greater than that of $Al_2O_3$ coating. The optimized coating thickness was found to be $300{\mu}m$ to ensure good anti-wear. The bond coating played important role in decreasing residual stress. The residual stress had much influence on wear mechanism. These results were correlated with the stress state of coating and the microstructure of coating.

• 한국표면공학회지
• /
• 제53권2호
• /
• pp.72-79
• /
• 2020

Two Fe-Cr steels of T22 steel and STS430 steel were corroded at 650 and 750℃ for 100hr in sewage sludge-(0.3% SO₂-6% O₂-10% H₂O-balance CO₂) mixed gas environment. T22 steel corroded faster than STS430, indicating that the Cr content significantly influence the corrosion rates. T22 formed thick and non-protective Fe₂O₃ as the major oxide and Fe₃O₄ as the minor one. With an increase in corrosion temperature, their corrosion rates increased, being accompanied with formation of pores and cracks in the thickened oxide scales that were non-adherent. STS430 steel formed Fe₂O₃, Fe₃O₄ as the outer scale and (Fe, Cr)-O as the inner layer by which its corrosion rate is greatly reduced. Both the T22 and STS430 steel samples formed multi-layered scales by outward diffusion of Fe ions and inward diffusion of oxygen and sulfur ions at high-temperature more than 650℃.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.376-380
• /
• 2008

The optical properties of multi layered thin films with $Sb_2O_3/Na_3AlF_6/Sb_2O_3/Cr$ were simulated by using EMP(Essential Macleod Program). EMP is a comprehensive software package to design and analyse the optical characteristics of multi-layered thin film. $Sb_2O_3$ and $Na_3AlF_6$ were selected as a high refractive index and low refractive index material respectively. Additionally Cr was chosen as mid reflective material. Optical properties including color effect were systematically studied in terms of different optical thickness of low refractive index material. The optical thickness of $Na_3AlF_6$ was changed as 0.25, 0.5, 0.75 and $1.0\lambda$. The film with 0.25, 0.5, 0.75 and $1.0\lambda$ of optical thickness showed mixed color range between purple and red range, yellowish green and bluish green, purple and mixed color range of green and purple respectively.

• 한국재료학회지
• /
• 제8권6호
• /
• pp.538-544
• /
• 1998

열차폐코팅층의 박리는 세라믹/금속접합층 계면에서 취성이 큰 스피텔의 생성, 금속과 세라믹의 열팽창계수의 차이, 세라믹층의 상변태, 코팅층의 잔류응력에 기인한다. 본 연구에서는 인코넬 713C에 전자빔 코팅 및 플라즈마 용사법으로 코팅된 안정화지르코니아/CoNiCrAIY 계면의 산화거동을 조사하기 위하여 $900^{\circ}C$에서 등온산화시험동안 생성되는 산화막층과 스피넬 생성 거동을 관찰, 분석하였다. 코팅 직후 코팅층에 고르게 분포하고 있는 Co,Ni,Cr,AI,Zr의 원소들이 산화시간에 따라 확산하여 산화반응을 하였다. 초기 20시간의 산화기시간에 안정화지르코니아/CoNiCrAIY 계면에 주요 성분이 $\alpha$-$AI_2O_3$인 산화막층이 생성되었고, CoNiCrAIY층에는 AI의 외부확산으로 인한 AI 결핍지역이 생성되었다. 산화시험동안 $\alpha$-AI2O층이 임계두께까지 성장한 후에 산화막층의 성장속도는 감소하였고, 안정화지르코니아/산화막층 계면에 스피넬, $Cr_2O_3$, $CO_2CrO_4$의 형성으로 인한 크랙이 관찰되었다.