• 한국재료학회지
• /
• 제10권7호
• /
• pp.471-477
• /
• 2000

Fe-Ni-Cr 합금의 용융염 부식거동을 $650~850^{\circ}C$ 온도범위에서 조사하였다. 용융염 LiCl에서 Cr을 포함하지 않는 KSA(Kaeri Superalloy)-1 합금은 Fe의 내부산화가 발생하고, Cr을 포함한 KSA-4, Incoloy 800H와 KSA-5는 LiCrO$_2$의 치밀한 보호막이 형성되었다. 혼합용융염 $LiCl-LiO_2$O에서 KSA-1은 Fe의 내부산화, KSA-4는 Cr의 내부산화가 발생하였고, Cr 농도가 높은 Incoloy 800H와 KSA-5는 $LiCrO_2$의 다공성 피 이 형성되었다. 혼합용융염 $LiCl-Li_2$O 에서는 Cr 농도의 증가에 따라 부식속도가 증가하였으며, 부식속도는 시간의존선을 8%Cr 이하의 합금에서는 포물선법칙, 8%Cr 이상의 합금에서는 직선법칙을 나타내었다. 이러한 현상은 Li$_2$O에 의한 보호성 산화물 $Cr_2O_3$의 염기성 용해기구로 설명할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1303-1305
• /
• 1998

In order to reduce or avoid oxidation problem at operation the interconnects in SOFCs have so far mostly been made of ceramic material. It has high chemical stability both under cathode and anode condition, relatively thermal expansion coefficient that matchs that of electrolyte material YSZ. But this material shown rather weak in the low oxygen atmosphere and thermal shock, and it has lower mechanical strength than alloys. To avoid these problems one may consider to use metals or alloys as materials for interconnects. Metallic interconnects are advantageous because of their high thermal and electronic conductivities. But it has some problems, Those are high thermal expansion and oxidation at high temperature in air. To solve these problems in the interconnection material in this study, $LaCrO_3$-dispersed Cr alloys for metallic interconnector of SOFC have been investigated as a fuction of $LaCrO_3$ content in the range of 5 to 25 vol.%. The Cr alloy were prepared by mixing Cr and $LaCrO_3$ powders in high-energy ball mill for 48h and by sintering under Ar atmosphere with 5vol.% $H_2$ for 10h at $1500^{\circ}C$. The alloys had a relative density of 95% and above. The Cr alloys in composed of two kind of small $LaCrO_3$ and large Cr particles. As the $LaCrO_3$ content increased, the Cr particle size decreased but the $LaCrO_3$ particle size remained contant. Also the oxidation tests show that the $LaCrO_3$-dispersed Cr is very resistant to oxidation in air. These results means that $LaCrO_3$-dispersed Cr is a useful material for metallic interconnect of planar SOFC.

• 한국표면공학회지
• /
• 제50권5호
• /
• pp.339-344
• /
• 2017

Highly corrosion resistance performance of CrAlSiN coatings were obtained by applying ultrathin $Al_2O_3$ thin films using atomic layer deposition (ALD) method. CrAlSiN coatings were prepared on Cr adhesion layer/SUS304 substrates by a hybrid coating system of arc ion plating and high power impulse magnetron sputtering (HiPIMS) method. And, ultrathin $Al_2O_3$ passivation layer was deposited on the CrAlSiN/Cr adhesion layer/SUS304 sample to protect CrAlSiN coatings by encapsulating the whole surface defects of coating using ALD. Here, the high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy dispersive X-ray spectrometry (EDX) analysis revealed that the ALD $Al_2O_3$ thin films uniformly covered the inner and outer surface of CrAlSiN coatings. Also, the potentiodynamic and potentiostatic polarization test revealed that the corrosion protection properties of CrAlSiN coatings/Cr/SUS304 sample was greatly improved by ALD encapsulation with 50 nm-thick $Al_2O_3$ thin films, which implies that ALD-$Al_2O_3$ passivation layer can be used as an effect barrier layer of corrosion.

• 한국표면공학회지
• /
• 제27권2호
• /
• pp.91-98
• /
• 1994

For the plasma sprayed as well as the EB-PVD thermal barrier coatings, the fracture paths within the oxidation products developed at the interface between the partially stabilized zirconia ceramic coating and NiCoCrAlY bond coat during cyclic thermal oxidation has been investigated. It was observed that the fracture in the oxidation products primarily took place within the oxide such as $Ni_{1-x}Co_3(Al_,Cr)_2O_4$ or at the interface between the oxide and $Al_2O_3$. It was found that Al2O3 developed first, followed by the Ni/Co/Cr rich oxides such as ,,$Ni_{1-x}Co_x(Al_,Cr)_2O_4$ $Cr_2O_3$and NiO at the interface between the ceramic coating and the bond coat in a cyclic high temperature environment. It was therfore concluded that the formation of the oxide containing Ni, Cr and Co was a life-limiting event for thermal barrier coatings during cyclic thermal oxidation.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.99-105
• /
• 2008

본 연구에서는 MLCC용 $BaTiO_3$에 첨가되는 $Cr_2O_3$와 $Mn_2O_3$의 나노코팅에 의한 core-shell 구조의 $BaTiO_3$ 분말을 제조하였다. 예비실험을 통해서 $KMnO_4$ 및 $K_2Cr_2O_4$ 그리고 sulfur를 사용하는 최적의 액상반응조건이 확립되었다. 본 연구에서는 두 첨가제 분말을 합성하였고 동일한 반응조건으로 두 첨가제를 $BaTiO_3$ 분말표면에 코팅하였다. 코팅은 one-step과 two-step의 두 방법으로 구분하여 시행하였고 그 결과를 분석 비교하였다. 결론적으로 말해서, $Cr_2O_3$와 $Mn_2O_3$의 두 첨가제는 용이한 반응조건에서 높은 수율로 우수한 품질의 코팅막을 형성하므로써, 첨가제 함량과 코팅막 특성의 정밀한 조절이 용이함을 보여주었다.

• 대한본초학회지
• /
• 제21권1호
• /
• pp.101-107
• /
• 2006

Objectives : It is well known that hexavalent chromium has toxic effect on normal cells. Recently, toxic effect of hexavalent chromium is diminished by the some extracts derived from herbs or plants. But, the toxic or protective mechanism of hexavalent chromium is well unknown. This study was performed to examine the protective effect of poncirin against $Na_2Cr_2O_7$-induced cytotoxicity on NIH3T3 fibroblasts. Methods : The protective effect of the cytotoxicity induced by $Na_2Cr_2O_7$ was measured by the cell viability after NIH3T3 fibroblasts were cultured with or without $Na_2Cr_2O_7$ for 48 hours. Antitoxic effects of poncirin on the cytotoxicity induced by $Na_2Cr_2O_7$ were examined by colorimetric assays such as MTT or XTT assay. Results : $Na_2Cr_2O_7$ decreased cell viability by the decreased absorbance in MTT or XTT assay, but, the poncirin increased cell viability which was decreased by $Na_2Cr_2O_7$-induced cytotoxicity on NIH3T3 fibroblasts. Conclusion : These results suggest that $Na_2Cr_2O_7$ showed cytotoxicity effect on NIH3T3 fibroblasts by the decrease of cell viavility, and poncirin was effective in the protection of $Na_2Cr_2O_7$-induced cytotoxicity in these cultures.

• 한국표면공학회지
• /
• 제39권3호
• /
• pp.129-136
• /
• 2006

The high velocity oxy-fuel sprayed coatings of 38Ni-23Co-20Cr-11Al-3Y-5Ta, 25Ni-34Co-20Cr-11Al-3Y-2Re and 32Ni-34.5Co-22Cr-11Al-0.5Ir (in wt%) were oxidized at 1000 and $1100^{\circ}C$ in air in order to find the alloying effect of Ta, Re and Ir on the oxidation properties of the NiCoCrAlY-base coatings. The primary phase of the coatings was $Ni_3Al$. The oxides formed on the coatings consisted primarily of ${\alpha}-Al_2O_3$, together with some $CoCr_2O_4,\;CoAl_2O_4$, and $Al_5Y_3O_{12}$. Tantalum oxidized to $Ta_2O_5$ and $Ta_2O_{22}$. However, no oxides of Re and Ir were detected by XRD owing to their thermodynamic inertness and/or their small amount.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.898-901
• /
• 2004

[ $ZnCr_2O_4$ ]를 모물질로 하고 MgO, $TiO_2$를 몰비로 2:1, 4:1, 6:1, 및 8:1이 되게 정량적으로 조합한 후, 조사하였다. $ZnCr_2O_4$-MgO와 $ZnCr_2O_4-TiO_2$를 X-선 분석한 결과 Spinel 결정구조를 형성하였으며, 또한 SEM과 EDX 분석결과 각각 $Li_2CrO_4$와 $Li_3VO_4$의 형성으로 인하여 저항 특성이 나타나는 것을 알 수 있었다. $ZnCr_2O_4-MgO$, $ZnCr_2O_4-TiO_2$에서 MgO의 양이 증가할수록 저항값은 약간 감소하는 반면, $TiO_2$의 양이 증가할수록 저항값이 급격히 증가하는 특성을 나타내었고, 감습 특성에서도 M??보다 TiO2가 더 높게 나타내었다. 습에 따른 복원 특성의 경우 $700^{\circ}C$에서 소결한 ($ZnCr_2O_4:MgO=4:1$)과 ($ZnCr_2O_4:TiO_2=6:1$) 조성의 센서가 가장 양호하였다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 춘계총회 및 연구발표회 초록집
• /
• pp.38.3-38.3
• /
• 2004

• 한국표면공학회지
• /
• 제27권2호
• /
• pp.74-82
• /
• 1994

The structure and properties such as adhesion and corrosion resistance of Cr and $Cr_2O_3$ films, deposited on steel plates by the vacuum evaporation method, were investigated. According to the ESCA and AES analy-sis, it could be concluded that chromium oxide with uniform composition could be formed on the steel sub-strate. The deposited Cr and $Cr_2O_3$ films had high adhesion strength, and they did not peeled off by the tape test. The adhesion property, however, was deteriorated as the film thciknes increased. After bending of the deposited specimen many cracks were observed by SEM, and they were assumed to have propagated along co-lumnar boundaries by the bending test. The corrosion resistance of the films was not generally good, which in-dicates that the films had a porous structure with a large number of defects such as pin holes and voids.