• 한국해양공학회지
• /
• 제13권1호통권31호
• /
• pp.62-69
• /
• 1999

67Ni-22Cr-10Al-1Y and $ZrO_2-8Y_2O_3$ were coated on the substrate surface of ST304 and Al2024 by the plasma spraying method. The adgesion of the films varies depending on the substrates and the laminating method. In the case of STS304, the cracks were observed at thermal shock temperature difference ${Delta}T$ of $900^{circ}C$ in the non functionally gradient material(NFGM) and at $1100^{circ}C$ in the functionally gradient material(FGM). The film adhesion of the FGM is better than that of the NFGM in ST304. The cumulative AE count of the FGM of STS304 increased continuously at the bending test. But the NFGM of STS304 showed discontinuity of the AE count. The total AE count for the FGM of STS304 decreased as the number of thermal shock increased, and this tendency was evident as the thermal shock temperature difference increased.

• 수산해양교육연구
• /
• 제10권1호
• /
• pp.79-86
• /
• 1998

In this study, the adhesive effect, blistering behavior and electrochemical polarization behavior of red lead film by the pretreatment work of sandblasting and potassium chromate($K_2CrO_4$) were investigated to prevent the corrosion of gas storage tank under marine environment. The main results obtained are as follows : 1) The adhesive effect of red lead film by the pretreatment work of sandblasting and potassium chromate is more improved than that of red lead film. 2) The blistering occurrence of red lead film by the pretreatment work of sandblasting and potassium chromate is more delayed than that of red lead film. 3) As the anodic potential is increased, corrosion current density of red lead film by the pre treatment work of sandblasting and potassium chromate is lower drained than that of red lead film.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.181-186
• /
• 2010

Since it was developed by Joseph Aspdin, cement has been a common construction materials up to the present time. However, there are trace constituents in cement clinker. One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The aim of the present study was to investigate the concentration of water-soluble hexavalent chromium in cement clinker by using industrial by-products. For that reason, raw materials were prepared to add different $SiO_2$, $Al_2O_3$, and $Fe_2O_3$ sources. After the raw materials such as the limestone, the sand and the clay, iron ore was pulverized and mixed, and the raw meal was burnt at about $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. The part in the raw materials of the clinker was substituted with slag, sludge, etc. and this was used to manufacturing cement clinker. To investigate the water-soluble hexavalent chromium content in clinker, raw meal was prepared by changing the modulus, the type, and the content of clinker materials and tested concentrations of hexavalent chromium in the clinkers. To determine $Cr^{+6}$ formation of the clinker, tests were done with raw meals adding chromium by using different industrial by-products. Consequently because the chromium was to be included in the raw materials of the clinker, production of Portland cement clinker was included with the chromium. Also, the chromium was converted into hexavalent chromium in the burning process.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.256-260
• /
• 2014

Columnar-structured cesium iodide (CsI) scintillators doped with thallium (Tl) are frequently used as x-ray converters in medical and industrial imaging. In this study we investigated the imaging characteristics of CsI:Tl films with various reflective layers-aluminum (Al), chromium (Cr), and titanium dioxide ($TiO_2$) powder-coated on glass substrates. We used two effusion-cell sources in a thermal evaporator system to fabricate CsI:Tl films on substrates. The scintillators were observed via scanning electron microscopy (SEM), and scintillation characteristics were evaluated on the basis of the emission spectrum, light output, light response to x-ray dose, modulation transfer function (MTF), and x-ray images. Compared to control films without a reflective layer, CsI:Tl films with reflective layers showed better sensitivity and light collection efficiency, and the film with a $TiO_2$ reflective layer showed the best properties.

• 한국지구과학회지
• /
• 제21권3호
• /
• pp.323-336
• /
• 2000

충남지역의 초염기성암체는 주로 활석과 석면광상의 모암을 이루는 사문암체로서 홍성-광천과 온양-유구-청양을 연결하는 선 내부의 선캄브리아기 편마암복합체내에서 북북동 방향에 따라 단속적으로 평행하게 발달하는 10여개조의 렌즈상관입암체들이다. 사문암체의 규모는 폭 수십 cm${\sim}$1km, 연장 수 m${\sim}$5km로서 곳에 따라 그 규모가 다양하다. 이 사문암들은 주로 SiO$_2$(평균 39.99wt.%)와 MgO(평균 38.46wt.%)로 구성되었고, Cr(>1011ppm), Ni(>1660ppm) 및 Co(>80ppm)의 함량이 많다. 이 사문암들은 주로 사문석의 양이 50% 이상인 것이 대부분이며, 부위에 따라 기원암의 잔류광물인 감람석과 휘석, 크롬철석 등이 발견되는 데 사문암체 내에는 부분적으로 이들 잔류광물의 함량이 50% 이상 되는 사문석화감람암과 활석 및 석면광체를 포함한다. 충남지역 사문암의 기원암은 알파인형 초염기성암으로서 약간 결핍된 상부 맨틀(깊이: 30${\sim}$40km)기원의 더나이트 내지 해즈버자이트였으며, 대규모 단층을 따라 상승한 것으로 해석된다. 이들 사문암의 기원암으로부터의 주 사문석화작용은 충남지역에서 일어난 녹색편암상 내지 각섬암상의 광역변성작용시에 일어난 것으로 해석된다.

• 한국염색가공학회지
• /
• 제14권1호
• /
• pp.1-10
• /
• 2002

The aim of study was to elucidate dyeability and antimicrobial and antifungal activity of silk fabrics dyed with Sophora Radix extracts according to different mordants. Dyes were extracted from Sophora Radix using ethanol. Then, silk fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60%(owf), the mordant was 3%(owf), L.R was 1:20, the temperature was $60~60^\circ{C}$, the time of dyeing was 60min., and the time of mordanting was 60min. The dyeability was evaluated by surface color, K/S values and durability of dye. The skin microorganisms used in this study was S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E coli, A. niger, C. albicans and T. mentatrophytes. The results are as follows; 1. When mordants were added, K/S value of silk dyed was not improved much and surface color was 2.2Y to 8.8Y in H(hue) value which indicated greenish yellow to raddish yellow 2. The color fastness tests to light, perspiration, dry-cleaning, rubbing, and stain fabric washing show 4~5th degree which were valuated excellent. The color fastness to fade washing was improved to 3~4th degree by addition of $K_2CrO_7$ mordants. 3. Antibacterial activity of silk dyed using no-mordant as well as mordants was excellent on S. aureus, B. subtilis, S.epidermidis and P.acnes, but showed poor antibacterial activities on P.aeruginosa and E.coli such as gram negative baterials 4. Antifungal activity of silk dyed with ethanol extracts was good on A.niger, C.candida and T.mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 gous in silk dyed mordanting with $SnCl_2\cdot{2H}_2O$.

• 한국식품과학회지
• /
• 제37권4호
• /
• pp.542-548
• /
• 2005

대나루(왕대)를 여러 가지 방법으로 추출하고 그 추출액의 화학 성분을 분석하였다. 대나무 추출액의 pH는 5.0-5.5였고, 가용성고형분과 총페놀 함량은 알코올 추출액이 각각 $13.7^{\circ}Brix$와 0.42%로 가장 높았으며, 증발잔사는 직접가열 추출액이 3.8%로 가장 높았다. 무기성분은 K이 가장 높은 함량을 보였으며, 추출방법에 따라서는 간접가열이 가장 높은 무기물 함량을 나타내었다. 중금속은 Al, Cr, Cu, Mn, Ni, Pb, Zn, 등이 검출되었으며, 유해중금속 중 As, Cd, Hg는 검출되지 않았고 Cr, Pb는 극미량 검출되었다. 폴리페놀은 catechin, chlorogenic acid, caffeic acid, 3-hydroxy benzoic acid, ferulic acid등 5종이 확인되었으며 이중 3-hydroxy benzoic acid와 catechin이 주종을 이루는 것으로 나타났다. 유리당은 galactose, glucose, fructose 및 sucrose가 검출되었으며 glucose와 sucrose의 함량이 가장 높았다. 유기산은 citric acid, tartaric acid, malic acid, succinic acid, acetic acid 등이 검출되었으나 직접가열 추출액은 tartaric acid가, 물 추출액과 알코올 추출액은 citric acid, tartaric acid 및 succinic acid가 검출되지 않았다. 항산화 활성은 간접가열 추출액과 알코올 추출액이 상업용 항산화제인 BHA와 ${\delta}-tocopherol$ 보다 우수하였다. 아질산염소거능은 pH 1.2와 3.0에서 효과가 우수하였으나 pH 6.0에서는 급격히 감소하였다. Tyrosinase 저해활성은 물 추출액이 가장 높았으며, SOD 유사활성과 ACE 저해활성은 간접가열 추출액이 가장 높았다. 식품 부패균에 대한 항균활성은 Bacillus subtilis, E. coli O157, Staphylococcus aureus에 대하여 높은 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.643-643
• /
• 2013

Recently, synthesis of low-dimensional nanostructures is gaining more importance due to their structural properties and growing potential applications. On the other hand, luminescent materials doped with rare earth ions have drawn immense attention. The commercial phosphors are based on many host materials. Among them, tungstates are being currently investigated by many research groups owing to a wide range of applications. Tungstates are formed by different metal cations (e.g., SrWO4, Na2WO4, NiWO4, Cr2WO6, and ZrW2O8) and their structure depends on the size of the metal cation. Tungstates with large bivalent cations (${\gg}0.1\;nm$) have the scheelite structure and the wolframite structure with smaller ions (＜0.1 nm). Strontium tungstate has the scheelite structure which is tetragonal with space group I41/a. The luminescent properties of the tungstate have been extensively explored in application fields such as sensors, detectors, lasers, photoluminiscent devices, photo catalysts, etc. In this work, we synthesized SrWO4 phosphors with different Eu3+ concentrations by using a facile route. The morphology was analyzed by using a field-emission scanning electron microscope, which exhibits the spherical shape. Transmission electron microscope image revealed the spheres composed of nanoparticles. X-ray diffraction patterns confirmed their tetragonal shape. The photoluminescence excitation and emission spectra were analyzed by varying the Eu3+ concentration, which shows a dominant red emission.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.77-82
• /
• 2015

The effect of the electrode type on the dielectric and piezoelectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ (PMN-PZT) single crystals was investigated in an effort to improve their properties for various piezoelectric applications. First, three different types of PMN-PZT single crystals [PMN-PZT-A (piezoelectrically soft type; dielectric constant ~ 10,000), PMN-PZT-B (piezoelectrically soft type; phase-transition temperature between the rhombohedral and tetragonal phases ($T_{RT}$) ~ $145^{\circ}C$), PMN-PZT-C (piezoelectrically hard type; high mechanical quality factor ($Q_m$) ~ 1,000)] were fabricated using the solid-state single crystal growth (SSCG) method. Then, four different types of electrodes [sputtered Au, sputtered Cr/Au, sputtered Ti/Au, and fired Ag] were formed on the single crystals, and their dielectric and piezoelectric properties were measured. The single crystals with a sputtered Ti/Au electrode showed the highest dielectric and piezoelectric constants but the lowest coercive electric field ($E_C$). The single crystals with a fired Ag electrode showed the lowest dielectric and piezoelectric constants but the highest coercive electric field ($E_C$). This dependence on the type of electrode was most significant in the piezoelectrically hard PMN-PZT-C single crystals. However, the effects of the electrode type on the phase transition temperatures ($T_C$, $T_{RT}$) and dielectric loss were negligible. These results clearly demonstrate that it is important to select an appropriate electrode so as to maximize the dielectric and piezoelectric properties of single crystals in each type of piezoelectric application.

• 한국결정성장학회지
• /
• 제21권2호
• /
• pp.55-59
• /
• 2011

Mong Hsu rubies from Myanmar include typically the dark core and blue patch but most of the previous research has merely focused on the dark core. This work is aimed to understanding clearly the characteristic of the dark core and blue patch of Mong Hsu rubies. It was found from the FTIR analysis that the dark core and blue patch region showed the absorption peaks of boehmite ($1986\;cm^{-1}$), diaspore ($2115\;cm^{-1}$) and water ($3400{\sim}3900\;cm^{-1}$) but the absorption peaks of O-H stretching ($3309\;cm^{-1}$ and $3078\;cm^{-1}$) were found only in blue patch region. The UV-VIS-NIR analysis of the dark core region revealed the stronger absorption of $Cr^{3+}$ at 405 and 554 nm compared to the blue patch region. In range of 600~800 nm, the UV absorption characteristic at 659, 675 and 693 nm assigned to $Cr^{3+}$ of core group samples is distinct from that of blue patch. The SEM-EDS examinations disclosed the existence of lots of micro-cracks and pores in the core regions compared to blue patch region.