• Journal of Ocean Engineering and Technology
• /
• v.13 no.1 s.31
• /
• pp.62-69
• /
• 1999

67Ni-22Cr-10Al-1Y and $ZrO_2-8Y_2O_3$ were coated on the substrate surface of ST304 and Al2024 by the plasma spraying method. The adgesion of the films varies depending on the substrates and the laminating method. In the case of STS304, the cracks were observed at thermal shock temperature difference ${Delta}T$ of $900^{circ}C$ in the non functionally gradient material(NFGM) and at $1100^{circ}C$ in the functionally gradient material(FGM). The film adhesion of the FGM is better than that of the NFGM in ST304. The cumulative AE count of the FGM of STS304 increased continuously at the bending test. But the NFGM of STS304 showed discontinuity of the AE count. The total AE count for the FGM of STS304 decreased as the number of thermal shock increased, and this tendency was evident as the thermal shock temperature difference increased.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.79-86
• /
• 1998

In this study, the adhesive effect, blistering behavior and electrochemical polarization behavior of red lead film by the pretreatment work of sandblasting and potassium chromate($K_2CrO_4$) were investigated to prevent the corrosion of gas storage tank under marine environment. The main results obtained are as follows : 1) The adhesive effect of red lead film by the pretreatment work of sandblasting and potassium chromate is more improved than that of red lead film. 2) The blistering occurrence of red lead film by the pretreatment work of sandblasting and potassium chromate is more delayed than that of red lead film. 3) As the anodic potential is increased, corrosion current density of red lead film by the pre treatment work of sandblasting and potassium chromate is lower drained than that of red lead film.

• Korean Journal of Materials Research
• /
• v.20 no.4
• /
• pp.181-186
• /
• 2010

Since it was developed by Joseph Aspdin, cement has been a common construction materials up to the present time. However, there are trace constituents in cement clinker. One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The aim of the present study was to investigate the concentration of water-soluble hexavalent chromium in cement clinker by using industrial by-products. For that reason, raw materials were prepared to add different $SiO_2$, $Al_2O_3$, and $Fe_2O_3$ sources. After the raw materials such as the limestone, the sand and the clay, iron ore was pulverized and mixed, and the raw meal was burnt at about $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. The part in the raw materials of the clinker was substituted with slag, sludge, etc. and this was used to manufacturing cement clinker. To investigate the water-soluble hexavalent chromium content in clinker, raw meal was prepared by changing the modulus, the type, and the content of clinker materials and tested concentrations of hexavalent chromium in the clinkers. To determine $Cr^{+6}$ formation of the clinker, tests were done with raw meals adding chromium by using different industrial by-products. Consequently because the chromium was to be included in the raw materials of the clinker, production of Portland cement clinker was included with the chromium. Also, the chromium was converted into hexavalent chromium in the burning process.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.256-260
• /
• 2014

Columnar-structured cesium iodide (CsI) scintillators doped with thallium (Tl) are frequently used as x-ray converters in medical and industrial imaging. In this study we investigated the imaging characteristics of CsI:Tl films with various reflective layers-aluminum (Al), chromium (Cr), and titanium dioxide ($TiO_2$) powder-coated on glass substrates. We used two effusion-cell sources in a thermal evaporator system to fabricate CsI:Tl films on substrates. The scintillators were observed via scanning electron microscopy (SEM), and scintillation characteristics were evaluated on the basis of the emission spectrum, light output, light response to x-ray dose, modulation transfer function (MTF), and x-ray images. Compared to control films without a reflective layer, CsI:Tl films with reflective layers showed better sensitivity and light collection efficiency, and the film with a $TiO_2$ reflective layer showed the best properties.

• Journal of the Korean earth science society
• /
• v.21 no.3
• /
• pp.323-336
• /
• 2000

Ultramafic rocks in Choongnam area are mainly serpenitinites which are parent rock of talc and asbestos ore deposits. About 10 $^{\circ}$ NNE-trending parallel serpentinites masses occur as discontineous isolated lenticular intrusive bodies in Precambrian gneiss complex between Hongseong-Kwangcheon line and Onyang-Cheongyang line. The sizes of serpentinites vary from several centimeters to 1 kilometer in width and from several meters to 5 kilometers in length. The serpentinites show high SiO$_2$(39.99wt.% in average), MgO(38.46wt % in average), Cr(>1011ppm), Ni(>1660ppm), and Co(>80ppm). Most serpentinites contain serpentine more than 50%. Some serpentines contain original minerals such as olivine, pyroxene and chromite. Also, serpentinites body may contain a little serpentinized peridotite, and some talc and asbestos ore deposits. The original rocks of the serpentinites interpreted as Alpine type ultramafic rocks, and dunite and/or harzburgite which were originated from slightly depleted upper mantle(30${\sim}$40km deep), and emplaced in the crust through the large fault zones. It seems that main serpentinization from the original rocks was occurred during greenschist and/or amphibolite facies regional metamorphism in Choongnam area.

• Textile Coloration and Finishing
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2002

The aim of study was to elucidate dyeability and antimicrobial and antifungal activity of silk fabrics dyed with Sophora Radix extracts according to different mordants. Dyes were extracted from Sophora Radix using ethanol. Then, silk fabrics were dyed with extracts two times by post-mordanting method in which the extract was 60%(owf), the mordant was 3%(owf), L.R was 1:20, the temperature was $60~60^\circ{C}$, the time of dyeing was 60min., and the time of mordanting was 60min. The dyeability was evaluated by surface color, K/S values and durability of dye. The skin microorganisms used in this study was S. sureus, B. subtilis, S. epidermidis, P. acnes, P. aeruginosa, E coli, A. niger, C. albicans and T. mentatrophytes. The results are as follows; 1. When mordants were added, K/S value of silk dyed was not improved much and surface color was 2.2Y to 8.8Y in H(hue) value which indicated greenish yellow to raddish yellow 2. The color fastness tests to light, perspiration, dry-cleaning, rubbing, and stain fabric washing show 4~5th degree which were valuated excellent. The color fastness to fade washing was improved to 3~4th degree by addition of $K_2CrO_7$ mordants. 3. Antibacterial activity of silk dyed using no-mordant as well as mordants was excellent on S. aureus, B. subtilis, S.epidermidis and P.acnes, but showed poor antibacterial activities on P.aeruginosa and E.coli such as gram negative baterials 4. Antifungal activity of silk dyed with ethanol extracts was good on A.niger, C.candida and T.mentagrophytes. Especially, on T. mentagrophytes there was no growth of fungus during 72 gous in silk dyed mordanting with $SnCl_2\cdot{2H}_2O$.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.542-548
• /
• 2005

Chemical components and physiological activities Bamboo (Phyllostachys bambusoides Starf) extracts obtained by burning, dry heating or extracting with water or 70% ethanol and were investigated. Contents of soluble solid and total phenolic compounds were highest in the ethanol extract. Contents of polyphenols such as catechin, chlorogenic acid, caffeic acid, 3-hydroxy benzoic acid and ferulic acid were determined. Free sugars consisted of galactose, glucose, fructose, and sucrose. Organic acids including citric, tartaric, malic, succinic, and acetic acid were present in the bamboo extracts. Antioxidant activities of dry heat and ethanol extracts were higher than those of BHA or ${\delta}-tocopherol$. Nitrite- scavenging effect of extracts ranged from 84.7 to 99.6% at pH 1.2 ana 3.0. Tyrosinase-inhibitory activity was higher in the water extract, and SOD-like and ACE-inhibitory activity were highest in tile dry kent extract. Antimicrobial activities of the bamboo extracts were strong against Bacillus subtilis, Escherichia coli O157, and Staphylococcus aureus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.643-643
• /
• 2013

Recently, synthesis of low-dimensional nanostructures is gaining more importance due to their structural properties and growing potential applications. On the other hand, luminescent materials doped with rare earth ions have drawn immense attention. The commercial phosphors are based on many host materials. Among them, tungstates are being currently investigated by many research groups owing to a wide range of applications. Tungstates are formed by different metal cations (e.g., SrWO4, Na2WO4, NiWO4, Cr2WO6, and ZrW2O8) and their structure depends on the size of the metal cation. Tungstates with large bivalent cations (${\gg}0.1\;nm$) have the scheelite structure and the wolframite structure with smaller ions (＜0.1 nm). Strontium tungstate has the scheelite structure which is tetragonal with space group I41/a. The luminescent properties of the tungstate have been extensively explored in application fields such as sensors, detectors, lasers, photoluminiscent devices, photo catalysts, etc. In this work, we synthesized SrWO4 phosphors with different Eu3+ concentrations by using a facile route. The morphology was analyzed by using a field-emission scanning electron microscope, which exhibits the spherical shape. Transmission electron microscope image revealed the spheres composed of nanoparticles. X-ray diffraction patterns confirmed their tetragonal shape. The photoluminescence excitation and emission spectra were analyzed by varying the Eu3+ concentration, which shows a dominant red emission.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.77-82
• /
• 2015

The effect of the electrode type on the dielectric and piezoelectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ (PMN-PZT) single crystals was investigated in an effort to improve their properties for various piezoelectric applications. First, three different types of PMN-PZT single crystals [PMN-PZT-A (piezoelectrically soft type; dielectric constant ~ 10,000), PMN-PZT-B (piezoelectrically soft type; phase-transition temperature between the rhombohedral and tetragonal phases ($T_{RT}$) ~ $145^{\circ}C$), PMN-PZT-C (piezoelectrically hard type; high mechanical quality factor ($Q_m$) ~ 1,000)] were fabricated using the solid-state single crystal growth (SSCG) method. Then, four different types of electrodes [sputtered Au, sputtered Cr/Au, sputtered Ti/Au, and fired Ag] were formed on the single crystals, and their dielectric and piezoelectric properties were measured. The single crystals with a sputtered Ti/Au electrode showed the highest dielectric and piezoelectric constants but the lowest coercive electric field ($E_C$). The single crystals with a fired Ag electrode showed the lowest dielectric and piezoelectric constants but the highest coercive electric field ($E_C$). This dependence on the type of electrode was most significant in the piezoelectrically hard PMN-PZT-C single crystals. However, the effects of the electrode type on the phase transition temperatures ($T_C$, $T_{RT}$) and dielectric loss were negligible. These results clearly demonstrate that it is important to select an appropriate electrode so as to maximize the dielectric and piezoelectric properties of single crystals in each type of piezoelectric application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.55-59
• /
• 2011

Mong Hsu rubies from Myanmar include typically the dark core and blue patch but most of the previous research has merely focused on the dark core. This work is aimed to understanding clearly the characteristic of the dark core and blue patch of Mong Hsu rubies. It was found from the FTIR analysis that the dark core and blue patch region showed the absorption peaks of boehmite ($1986\;cm^{-1}$), diaspore ($2115\;cm^{-1}$) and water ($3400{\sim}3900\;cm^{-1}$) but the absorption peaks of O-H stretching ($3309\;cm^{-1}$ and $3078\;cm^{-1}$) were found only in blue patch region. The UV-VIS-NIR analysis of the dark core region revealed the stronger absorption of $Cr^{3+}$ at 405 and 554 nm compared to the blue patch region. In range of 600~800 nm, the UV absorption characteristic at 659, 675 and 693 nm assigned to $Cr^{3+}$ of core group samples is distinct from that of blue patch. The SEM-EDS examinations disclosed the existence of lots of micro-cracks and pores in the core regions compared to blue patch region.