• Korean Journal of Food Science and Technology
• /
• v.46 no.4
• /
• pp.470-476
• /
• 2014

This study was performed to evaluate the quality characteristics and antioxidant activity of sikhe prepared using various concentrations of hot water extracts roasted coffee ground residue (CR-sikhe; 0.2, 0.4, 0.6, 0.8, and 1.0%). The pH increased with increasing CR concentration. The reducing sugar content after 5 h saccharification was the highest when 0.8% CR extract was used. Total polyphenol and flavonoid contents increased in a concentration-dependent manner reaching maximum levels when 1.0% CR-extract was used. The antioxidant activities of CR-extracts were higher than that of the control and increased dose-dependently. The CR-0.6 showed the best taste (4.28), color (4.56), flavor (4.08), and overall acceptability (4.28). After 10 day of storage at $4^{\circ}C$, the total cell count in CR-sikhe was approximately 1-2 log cycle, which was less than that in the control.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.6
• /
• pp.627-632
• /
• 1992

The effect of dietary pectin in the upper gastrointestinal transit rate was studied. Rats fed fiber-free diet or 10% pectin diet were offered 51-$CrCl_3,$ a transit marker. The movement of 51-Cr dose through the gastrointestinal tract was measured at intervals from 20 minutes to 6 hours after dosing. pectin significantly increased gastric emptying rate upto 3 hours after dosing. Pectin also increased small intestinal transit rate from 3 hours to 4 hours after dosing. The results suggest that delayed gastric emptying is not likely the important aspect of the mechanism by which pectin could flatten the post-prandial response of serum glucose and insulin.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.390-395
• /
• 2013

Nanocrystalline CrN films were deposited on Si (100) substrates by means of asymmetric pulsed DC reactive magnetron sputtering. We investigated the growth behavior, corrosion resistance and mechanical properties of CrN films with a change in the duty cycle and pulse frequency. The grain size of the CrN films decreased from 25.4 nm to 11.2 nm upon a decrease in the duty cycle. The corrosion potentials for the CrN films by DC sputtering was approximately - 0.6 V, and it increased to - 0.3 V in the CrN films which underwent pulsed sputtering. The nanoindentation hardness of the CrN films also increased with a decrease in the duty cycle. This enhancement of the corrosion resistance and mechanical properties of pulsed sputtered CrN films could be attributed to the densification and surface smoothness of the microstructure of the films.

• Korean Journal of Environmental Agriculture
• /
• v.27 no.4
• /
• pp.382-388
• /
• 2008

This study was initiated to elucidate the relation between the toxicity of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ and sludge age (Solids retention time, SRT). The effect of SRT on the toxicity of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ in activated sludge system was investigated with INT-dehydrogenase assay. Experimental results showed that the inhibitory effects of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ were reduced as the sludge age increased from SRT 5 d to SRT 25 d. It is noteworthy that the experimental results enabled to determine the relative toxicity of the tested metals depending on the sludge age. At the SRT of 5 and 9 days, the order of toxicity of the three metals to the activated sludge was $Cr^{6+}$ > $Zn^{2+}$ > $Cd^{2+}$ (the $IC_{50}$ value of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ was 16.15, 25.90, and 32.49 mg/L, respectively) and $Zn^{2+}$ > $Cr^{6+}$ > $Cd^{2+}$ (the $IC_{50}$ value of $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$ was 39.12, 27.93, and 42.31 mg/L, respectively), respectively. However, the toxicity of three metals was almost same at the SRT of 14 and 25 days (the range of $IC_{50}$ in SRT 14 and 25 days was from 49.80 mg/ L to 53.44 mg/L among three heavy metals). This results would be explained by that the quantity of biopolymer formed in short SRT was small, whereas that in long SRT was large. Consequently, it is recommended that sludge age be maintained at long SRT in order to avoid the toxicity inhibition of heavy metals such as $Cr^{6+}$, $Zn^{2+}$, and $Cd^{2+}$.

• BMB Reports
• /
• v.44 no.4
• /
• pp.262-266
• /
• 2011

The aac(6')-Ib gene is the most prevalent gene that encodes aminoglycoside-modifying enzymes and confers resistance to tobramycin, kanamycin, and amikacin. The aac(6')-Ib-cr variant gene can induce resistance against aminoglycoside and fluoroquinolone simultaneously. Two main methods, sequence analysis and the restriction enzyme method, can detect the aac(6')-Ib-cr variant in clinical strains. We collected the 85 strains that were believed to be aac(6')-Ib positive from clinical isolates. Among them, 38 strains were the wild-type; the remaining 47 strains were the aac(6')-Ib-cr variant. Of these 47 strains, 19 simultaneously harbored aac(6')-Ib and aac(6')-Ib-cr. Our study aims to report the characteristics of the 19 strains that simultaneously harbored both genes. This study is the first investigation published in Korea of strains that included both aac(6')-Ib and aac(6')-Ib-cr variant.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.241-247
• /
• 2006

Recently, interests and utilization on Computed Radiography(CR) and Digital Radiography(DR) tends to increase owing to an introduction of Picture Archiving and Communication System(PACS) and an accuracy control of special medical equipment for a breast imaging examination. This study was intended to compare and analyze a detector's imaging quality by each system to be used for the breast imaging examination by using ACR Phantom used at the accuracy control. As an evaluation method, a significance and reliability of image's value using the ACR Phantom was analyzed by using SPSS program. The results are followed. 1. For the fiber, there was 3.9 score in Screen-Film, 4.2 score in CR($50{\mu}m$), 3.2 score in CR($100{\mu}m$), and 4.2 score in DR. There was the high score in the order of CR($50{\mu}m$), DR, Screen-Film, and CR($100{\mu}m$)(P<0.05). 2. For the calcification, there was 2.7 score in Screen-Film, 2.5 score in CR($50{\mu}m$), 2.0 score in CR($100{\mu}m$), and 2.9 score in DR. There was the high score in the order of DR, Screen-Film, CR($50{\mu}m$), and CR($100{\mu}m$).(0.025(P<0.05). 3. For Mass, there was 3.8 score in Screen-Film, 3.8 score in CR($50{\mu}m$), 3.6 score in CR($100{\mu}m$), and 4.5 score in DR. There was the high score in the order of DR, CR($50{\mu}m$), Screen-Film, and CR($100{\mu}m$) (P<0.1). 4. As the total score, there was 10.4 score in Screen-Film, 10.6 score in CR($50{\mu}m$), 8.7 score in CR($100{\mu}m$), and 11.3 score in DR. There was the high score in the order of DR, $CR(50{\mu}m$), Screen-Film, and $CR(100{\mu}m$). As shown in the above results, it can be known that DR and Screen-Film System has higher image quality than CR. But, DR has unstability caused by element, and Screen-Film has the low image quality caused by artifact as disadvantages. When Dual-Side CR($50{\mu}m$) was used among CR systems which had the problem of low image quality, it was indicated that there was no difference with Screen-Film System. Because the radiation imaging examination tends to become digitalized, each system for the breast imaging examination will need to be developed and supplemented.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.714-719
• /
• 2005

NiCr thin film was deposited by DC magnetron sputtering on $A;_2O_3$/Si substrate with NiCr (80:20) alloy target. NiCr thin films were annealed at $300^{\circ}C,\;400^{\circ}C,\;500^{\circ}C,\;600^{\circ}C,\;and\;700^{\circ}C$ for 6 hr in $H_2$ after annealing at $500^{\circ}C$ for 6hr in air atmosphere, respectively. To analyze NiCr thin film properties, the changes of its micro structure were Investigated through field emission scanning electron microscope (FESEM). X-ray photoelectron spectroscopy (XPS) was used to analyze a surface of NiCr thin film. Resistance of NiCr thin film was measured by 4-point probe technique. The generated heats were measured by infrared thermometer through the application of DC voltage (5 V/l2 V). NiCr thin film treated by gradational double annealing process had uniform and small grains. Maximum temperature generated heat by NiCr micro heater was $173^{\circ}C$. We expect that our results will be a useful reference in the realization of NiCr micro heater.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.6
• /
• pp.354-359
• /
• 2018

NaCl-induced hot corrosion behavior of ASTM T22 (Fe-2.25Cr-1Mo), T91 (Fe-9Cr-1Mo), T92 (Fe-9Cr-1.8W-0.5Mo), 347HFG (Fe-18-Cr-11Ni), and 310H (Fe-25Cr-19Ni) steels was studied after spraying NaCl on the surface. During corrosion at $600-800^{\circ}C$ for 50-100 h, thick, non-adherent, fragile, somewhat porous oxide scales formed. All the alloys corroded fast with large weight gains owing to fast scaling and destruction of protective oxide scales. Corrosion rates increased progressively as the corrosion temperature and time increased. Corrosion resistance increased in the order of T22, T91, T92, 347HFG, and 310H, suggesting that the alloying elements of Cr, Ni, and W beneficially improved the corrosion resistance of steels. Basically, Fe oxidized to $Fe_2O_3$, and Cr oxidized to $Cr_2O_3$, some of which further reacted with FeO to form $FeCr_2O_4$ or with NiO to form $NiCr_2O_4$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.113-113
• /
• 2018

환경 친화형 전기자동차, 하이브리드 자동차, 전철 등에서는 고내압 및 소형으로 전력손실을 감소시킬 수 있는 파워 디바이스가 필수이다. 최근, 실리콘 카바이드(SiC, silcon carbide)는 기존 실리콘(Si)보다 스위칭 손실의 저감 및 고온환경에서의 동작 특성이 우수하여, 차세대 저 손실 전력반도체 재료로서 기대를 받고 있다. 용액 성장 법에서 고품질 SiC 결정을 만들 수 있다. 그러나 늦은 성장 속도 때문에 SiC의 양산을 어렵게 하고 있다. 현재까지 성장 속도 향상을 위한 Si용매에 Cr을 첨가하여 탄소 용해도를 높이는 방법이 사용되고 안정된 성장을 위한 Si-Cr용매에 Al를 첨가하는 등 다양한 금속을 첨가하는 방법이 이용되고 있다. 선행 연구에서는 다양한 용매인 탄소 용해도를 실측하고 특히 큰 탄소 용해도를 보인 것은 Co이었다. 본 연구에서는 $Si_{0.6}Cr_{0.4}$원료와 Co를 첨가한 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 용매에 의한 SiC용액 성장을 실시하고 결정 성장 속도 및 표면 상태의 변화를 검토했다. on-axis 4H-SiC(000-1)을 사용한 Top-seeded solution growth(TSSG)법과 원자 비율로 $Si_{0.6}Cr_{0.4}$와 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 용매를 이용하여 SiC 용액 성장을 실시했다. Ar가스에서 저항 가열로 내를 치환 후에 $1800^{\circ}C$까지 가열하고 종자화 후에 120분간 유지하고 결정 성장을 실시했다. 냉각 후에 성장의 표면에 남은 용매를 $HF+HNO_3$에서 제거했다. 광학 현미경을 이용하여 결정면과 두께를 관찰 측정했다. Co를 첨가한 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 경우는 $Si_{0.6}Cr_{0.4}$의 경우보다 결정 성장 속도가 향상됐다. 또한 $Si_{0.6}Cr_{0.4}$보다 step-flow의 성장을 나타낸 결정의 표면이 전반적으로 관찰됐으며 안정된 결정성장을 나타냈다. 본 연구에서 실시한 연구 방법과 결과는 고품질 및 고속의 SiC 용액성장을 위한 매우 유용한 자료로 활용 될 수 있을 것으로 판단한다.

• Proceedings of the KAIS Fall Conference
• /
• 2000.10a
• /
• pp.34-35
• /
• 2000

용접기의 전극에 사용되는 크롬동합금은 일반적으로 높은 전기전도도와 고온강도가 요구되어진다. 크롬동합금은 대표적인 시효경화합금으로 용체화처리와 시효처리를 통하여 최적의 성질들이 얻어진다. 본 연구에서는 Cu-0.6wt%Cr, Cu-1.2wt%Cr 합금을 이용하여 용체화처리온도, 시효처리온도 및 시간 등을 변화시켜 실험하였다. 각 열처리에 따른 전기전도도와 경도를 측정하고 미세구조를 조사하여 최적의 공정조건을 구하였다. Cr이 적은 Cu-0.6wt%Cr 합금이 경도의 큰 감소없이 더 높은 전기전도도를 나타내었다.