• 한국재료학회지
• /
• 제9권1호
• /
• pp.3-7
• /
• 1999

The change of phosphorescent property with chemical modification and co-doping of Nd as an auxiliary activator in CaAl$_2$$O_4$: Eu\ulcorner, Nd\ulcorner phosphor, employing Nd\ulcornerion(0.6%) and an co-activator maintained its afterglow for 4.5 hours. And also the initial persistent brightness and phosphorescent property were further improved both by substituting Al by B atoms and incorporation of Nd\ulcorner ion. It was found that the persistent time was 30 hours for&Ca(Al_{0.97}\;B_{0.03}) $_2$$O_4$:EU\ulcorner(0.3%), Nd\ulcorner(0.6%) phosphor.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.90-93
• /
• 2001

Co/$Al_O_3$/NiFe and CO/$Al_O_3$/Co tunnel junctions were fabricated by a radio frequency magnetron sputtering at room temperature with hard mask on glass and $4^{\circ}$ tilt cut Si (111) substrates. The barrier layer was formed through two steps. After the Al layer was deposited, it was oxidized in the chamber of a reactive ion etching system (RIE) with $O_2$plasma at various conditions. The dependence of the TMR value and junction resistance on the thickness of Al layer (before oxidation) and oxidation parameters were investigated. Magnetoresistance value of 7% at room temperature was obtained by optimizing the Al layer thickness and oxidation conditions. Circular shape junctions on $4^{\circ}$tilt cut Si (111) substrate showed 4% magnetoresistance. Photovoltaic energy conversion effect was observed with the cross-strip geometry junctions on Si substrate.

• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.268-275
• /
• 2003

The water-splitting process by the metal oxides using solar heat is one of the hydrogen production method. The hydrogen production process using the metal oxides (NiFe2O4/NiAl2O4,CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite) was carried out by two steps. The first step was carried out by the CH4-reduction to increase activation of metal oxides at operation temperature. And then, it was carried out the water-splitting reaction using the water at operation temperature for the second step. Hydrogen was produced in this step. The production rates of H2 were 110, 160, 72, 29, 17, $21m{\ell}/hr{\cdot}g-_{Metal\;Oxide}$ for NiFe2O4/NiAl2O4, CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite respectively in the second step. CoFe2O4/CoAl2O4 had higher H2 production rate than the other metal oxides.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.757-767
• /
• 2018

고온에서 진행되는 프로판 탈수소 반응에서 촉매의 불활성화의 주된 원인은 코크 침적, 소결현상이 있다. 이러한 불활성화를 줄이는 촉매를 연구하기 위해, 본 연구에서는 열적 안정성이 높은 $MgAl_2O_4$ 를 담체로 적용하여 프로판 탈수소 반응용 촉매로의 활용성을 확인하고자 하였다. Alcohthermal method로 $MgAl_2O_4$를 소성온도 800, 900, $1000^{\circ}C$로 달리하여 제조하였고, Pt와 Sn을 공동함침법으로 담지하여$Pt-Sn/MgAl_2O_4$촉매를 제조하였다. 열적안정성의 확인을 위해 반응온도를 고온의 650, $600^{\circ}C$에서 진행하였다. 반응실험 결과 반응온도에 상관없이 담체의 소성온도가 $800^{\circ}C$인 담체적용 촉매일 때 프로판 탈수소반응 실험의 전환율과 수율이 담체소성온도가 900, $1000^{\circ}C$인 담체적용 촉매보다 높은 것을 확인하였고, 반응온도가 고온인 $650^{\circ}C$일 때는 $Pt-Sn/{\theta}-Al_2O_3$보다도 더 높은 수율을 가지는 것을 볼 수 있었다. 특성분석으로는 TGA, BET, XRD, CO-화학흡착, SEM-EDS 분석을 실시하였다. $MgAl_2O_4-800^{\circ}C$가 좋은 수율과 Pt분산도 및 적은 불활성화 정도의 관계를 서로 연관 지어 확인하였다.

• 한국대기환경학회지
• /
• 제3권1호
• /
• pp.1-12
• /
• 1987

A series of supported sulfided Ni-W/$\gamma-Al_2O_3$ and Co-W/$\gamma-Al_2O_3$ catalysts with different nickel and cobalt contents were studied in the hydrodenitrogenation of pyridine dissolved in n-heptane. The ranges of experimental conditions were at the temperatures between 453 and 753 K, and the pressures between 30 and 50 Bar. The catalytic activities with different nickel and cobalt contents were shown to be maximum at Ni/Ni+W = 0.2 - 0.3, Co/Co+W = 0.3 - 0.4. Pyridine conversion increased with pressure and temperature and the step of piperidine formation was found to be irreversible. The reaction orders in Ni-W/$\gamma-Al_2O_3$ and Co-W/$\gamma-Al_2O_3$ catalysts were the first with respect to pyridine and reaction rate constants decreased with increase of initial pyridine concentration and their activation energies were 12.98 and 9.23 kcal/mol, respectively.

• 청정기술
• /
• 제23권1호
• /
• pp.104-112
• /
• 2017

해조류로부터 수열 액화 반응을 통해 생성된 원료를 이용하여 수소가스를 생산하기 위해 개질 반응용 상용화 촉매와 $K_2Ti_xO_y$가 첨가된 니켈(Ni) 제조 촉매를 사용하여 반응온도에 따른 수증기 개질 반응을 수행하였다. 반응원료는 해조류 바이오매스를 503 K의 반응온도에서 2시간 동안 수열 액화를 통해 생성된 액화 원료를 사용하였으며, 상용화 촉매(FCR-4-02)와 제조 촉매($Ni/K_2Ti_xO_y-Al_2O_3$, $Ni/K_2Ti_xO_y-SiO_2$, $Ni/K_2Ti_xO_y-ZrO_2/CeO_2$, Ni/$K_2Ti_xO_y$-MgO) 및 반응온도에 따른 수증기 개질 반응의 활성을 비교 연구하였다. 실험결과 제조 촉매 4종 모두 상용화 촉매와 비교하여 반응활성이 높게 나타나는 것이 확인되었으며, 제조 촉매의 지지체에 따라 생성되는 가스의 조성이 달라지는 것이 확인되었다. 특히, 산성이나 염기성을 띄는 $Al_2O_3$와 MgO의 지지체와 중성을 띄는 $SiO_2$의 지지체에서는 CO가 선택적으로 높게 생성이 되었으며 환원성을 띄는 $CeO_2$를 포함하는 지지체에서는 수성가스 전환 반응이 일어나 $CO_2$가 높게 생성됨을 보였다.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.307-312
• /
• 2009

제주도의 화산쇄설성 퇴적암인 신양리층에서 산출되는 motukoreaite와 quintinite-3T를 보고한다. 두 광물은 Mg-Al 층상복수산화물로서 현무암 유리질 입자 사이를 충전하는 극미립판상 입자들의 구상 또는 포도상 집합체로 산출된다. Quintinite-3T의 집합체 외각에 motukoreaite의 판상 입자들이 과성장하여 피복하였다. 두 광물의 X선회절자료와 화학조성은 대체로 문헌에 보고된 값들과 유사하지만, motukoreaite의 Mg/Al 비는 보고된 값보다 조금 크다. 전자현미화학 분석 값으로부터 구한 motukoreaite와 quintinite-3T의 구조식은 각각 $Na_{1.6}Ca_{0.1}Mg_{40.7}Al_{20.7}Si_{0.9}(CO_3)_{13.6}(SO_4)_{7.4}(OH)_{108}56H_2O$와 $Mg_{3.7}Al_{1.9}Si_{0.2}(OH)_{12}(CO_3)_{0.8}(SO_4)_{0.2}3H_2O$이다. 두 광물은 얕은 바다에 퇴적된 현무암 유리질 입자들이 해수와 반응하여 생성 되었으며, 해저 환경에서 화산쇄설성 퇴적물의 교결 및 고화작용에 기여하였다.

• Carbon letters
• /
• 제5권2호
• /
• pp.81-87
• /
• 2004

The effect of compositions of $Al_2O_3$ in the mixed $Fe/Al_2O_3$ catalysts on the synthetic behaviors of carbon nanotubes (CNTs) by catalytic chemical vapor deposition (CCVD) process was investigated in wide range of the mixture ratios of support materials. CNTs were synthesized with $Fe/Al_2O_3$ catalysis under the condition of 40 min in synthetic time, and 923 K of synthetic temperature using $C_2H_4$ and $H_2$ as synthetic and carrier gas, respectively. The carbon yield with the content of $Al_2O_3$ showed in a parabolic curve and the maximum carbon yield was 40 wt.% of $Al_2O_3$. As the mixture ratio of $Al_2O_3$ increased, decreasing tendency was observed in the diameter of CNTs. Specific surface areas of CNTs were increased with the increase of the mixture ratio of $Al_2O_3$.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1239-1244
• /
• 2000

A study of K addition to the catalyst of CoMo/ ${\gamma}-Al_2O_3$ was studied. The catalyst with 10 at% of K to Mo atoms in 3C10M, the catalyst added 3 wt% CoO to 10 wt% $MoO_3/{\gamma}-Al_2O_3$, showed the highest activity for water gas shift reaction. The addition of K retarded the reducibility of cobalt-molybdenum catalysts. It gave, however, good dispersion and large BET surface area to the catalysts which were attributed to the disappearance of polymolybdate clustyer such as $Mo_7O_{24}^{6-}$ and the formation of small Mo$O_4^{2-}$ cluster. It was confirmed by the analyses of pore size distribution, activation energy, Raman spectroscopy, and electron diffraction. The activation energies and the frequency factors of the catalysts 3C10M and 5KC10M (the catalyst added 5 at% K for Mo to the catalyst 3C10M) were 43.1 and 47.8 kJ/mole, and 4,297 and 13,505 $sec^{-1}$, respectively. These values were also well correlated with our suggestion. These phenomena were attributed to the direct interaction between K and CoMo oxides irrelevant to the support.

• 한국재료학회지
• /
• 제28권7호
• /
• pp.371-375
• /
• 2018

The manganese-, nickel-, and aluminum-doped cobalt ferrite powders, $Mn_{0.2}Co_{0.8}Fe_2O_4$, $Ni_{0.2}Co_{0.8}Fe_2O_4$, and $Al_{0.2}CoFe_{1.8}O_4$, are fabricated by the sol-gel method, and the crystallographic and magnetic properties of the powders are studied in comparison with those of $CoFe_2O_4$. All the ferrite powders are nano-sized and have a single spinel structure with the lattice constant increasing in $Mn_{0.2}Co_{0.8}Fe_2O_4$ but decreasing in $Ni_{0.2}Co_{0.8}Fe_2O_4$ and $Al_{0.2}CoFe_{1.8}O_4$. All the $M{\ddot{o}}ssbauer$ spectra are fitted as a superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. The values of the magnetic hyperfine fields of $Ni_{0.2}Co_{0.8}Fe_2O_4$ are somewhat increased in the A and B sites, while those of $Mn_{0.2}Co_{0.8}Fe_2O_4$ and $Al_{0.2}CoFe_{1.8}O_4$ are decreased. The variation of $M{\ddot{o}}ssbauer$ parameters is explained using the cation distribution equation, superexchange interaction and particle size. The hysteresis curves of the ferrite powders reveal a typical soft ferrite pattern. The variation in the values of saturation magnetization and coercivity are explained in terms of the site distributions, particle sizes and the spin magnetic moments of the doped ions.