• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.347-353
• /
• 2002

This study was conducted to investigate the characteristics of chloramination as a secondary disinfection in a drinking water distribution system. At the range from pH 6 to pH 8, monochloramine was predominant with a trace of dichloramine, and the free chlorine was detected after breakpoint. At $25^{\circ}C$, the breakpoints of pH 6, 7 and 8 appeared when the weight ratios of chlorine to ammonia nitrogen were 11:1, 9:1 and 10:1 respectively, and the peak points on the breakpoint curves at pH 6, 7 and 8 were in the Cl$_2$ / NH$_3$-N ratio of 9:1, 6:1 and 5:1 respectively. As pH increased from 6 to 8, maximum point of monochloramine on the breakpoint curve was moved from 7:1 to 5:1 in the weight ratio of chlorine to ammonia nitrogen. The maximum concentration of monochloramine was formed at the pH values of 7~8 and in the Cl$_2$ / NH$_3$-N ratio below 5:1. As the Cl$_2$/NH$_3$-N ratio increased and the pH lowered, chloramines decay proceeded at an increased rate, and residual chloramines lasted longer than the residual free chlorine. The monochloramine and the dichloramine were formed at pH 6, and then the dichloramine continued increasing with contact time.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.77-82
• /
• 1999

This study was carried to investigate the characteristics of chloramination as a disinfection in drinking water distribution system. The raw water comes from midstream of Han river. In the range of pH 6~8, preformed chloramine of $Cl_2/NH_3-N$ ratio 5:1 had the HPC inactivation of more than 99% with lower pH and shorter contact time and available chloramine residual was decreased a little. In the chloramines of $Cl_2/NH_3-N$ ratio 3:1~5:1, the higher $Cl_2/NH_3-N$ ratio, the much inactivation of HPC was increased, but as contact time was longer, HPC inactivation of $Cl_2/NH_3-N$ ratio 3:1~5:1 were equaled. Bactericidal activity of three chlorine and postammoniation was influenced by free available chlorine completely and that of preammoniation was as follows : free chlorine ${\fallingdotseq}$ postammoniation>preammoniation>preformed chloramine.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.3
• /
• pp.348-354
• /
• 1996

This study was carried out to investigate factors influencing on the groundwater quality at controlled horticulture in Honam area in 1995. The deeper groundwater sampling, the lower concentrations of $NH_4-N$ and $NO_3-N$ were observed. There was no difference in concentrations of $SO_4\;^{2-}$ and $Na^+$ in the groundwater below 15m. Contents of $NH_4-N$, $NO_3-N$ and $PO_4\;^{3-}$ in groundwater were the highest at rice transplanting season(the late May) and that of $SO_4\;^{2-}$, $Na^+$ and $Cl^-$ were the highest at dry season(the mid-February). Continuous cultivation of horticultural crops showed higher concentration of $NH_4-N$, $NO_3-N$, $PO_4\;^{3-}$, $Na^+$ and $Cl^-$ in groundwater than rotational culture with rice. The longer cultivation years with horticultural crops, the higher concentrations of $NO_3-N$, $PO_4\;^{3-}$, $SO_4\;^{2-}$ and $Cl^-$ were shown, and constitutional ratio of $NO_3-N$ among the anions increased gradually. Nitrate-N level, exceeded 20mg/l, the critical level for agricultural usage, frequently at Yongjinmyeon Wanju and Janglockdong Kwangju, and $PO_4\;^{3-}$ levels were higher at Seogtandong Iksan than the other places.

• Journal of Environmental Science International
• /
• v.10 no.3
• /
• pp.247-252
• /
• 2001

This study was performed to evaluate the inactivation and microbial regrowth of heterotrophic and nitrifying bacteria using chloramine as a secondary disinfectant for drinding water distribution system. Three sets of the three reactors filled with the $Cl_2/NH_3-N$ ratio of 3:1, 4:1, and 5:1 were used in these experiments. Chloramine concentration were applied to each set of the reactors with $1mg/\ell$,\;2mg/\ell\;and\;3mg/\ell$, respectively. For the set with elapsed time and reached to zero level after 7 days. Heterotrophic bacteria remarkably increased and nitrification through the experimenatal period (21 day). Furthermore the regrowth of heterotrophic bacteria and nitrification were not found. More than $2mg/\ell$ of chloramine with $Cl_2/NH_3-N$ ratio of 3:1, the nitrification could be inhibited by 2 days of contact time.

• Microbiology and Biotechnology Letters
• /
• v.31 no.2
• /
• pp.171-176
• /
• 2003

Productivity of biosurfactant (rhamnolipid) by Pseudomonas aeuginosa F722 was investigated in the several culture conditions and culture composition. Biosurfactant production by P. aeuginosa F722 was amounted to 0.78 g/l as the result of the nitrogen sources and carbon sources without investing of optimum conditions. As for that one was investigated, biosurfactant production by P. aeruginosa F722 was amounted to 1.66 g/l. Biosurfactant production increased twofold because the composition of a modified C-medium was investigated efficiently. $NE_4$Cl or $NaNO_2$ inorganic nitrogens and yeast extract or trypton organic nitrogens were effective, but others inorganic nitrogens and organic nitrogens tested were not efficient far biosurfactant production by P. aeruginosa F722. The optimum concentration of $NH_4$Cl; inorganic nitrogen and yeast extract; organic nitrogen were 0.05% and 0.1%, respectively. In various carbon sources, others with the exception of hydrophobic property substrate (n-alkane) and hydrophilic property substrate (glucose, glycol) were not found to be effective fur biosurfactant production, and 3.0% was better in yield than other concentration of glucose. This yielded C-to-N ratios between 17 and 20. In our experiment, the highest biosurfactant production by P. aeruginosa F722 were observed in 5 days cultivation, containing glucose 3.0%, $NH_4$Cl 0.05%, and yeast extract 0.1% and C-to-N ratio was 20. Optimal pH and temperature for biosurfactant production were 7.0 and $35^{\circ}C$, respectively. Under the optimal culture conditions with glucose, biosurfactant production was amounted to 1.66 g/l. Velocity of biosurfactant production and strain growth increased after nitrogen depletion. The average surface tension of 30 mN/m after the 3 days of incubation under optimal culture condition was measured by ring tensionmeter.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.11-16
• /
• 1999

This study was performed to investigate THMs formation by chloramination as a secondary disinfection in drinking water distribution system. As the $Cl_2/NH_3-N$ ratio increased from 1:1 to 4:1, the THMs concentration had actually no change in the breakpoint curve of pH 6, 7. At pH 8, THMs level was not augmented at between 1:1 and 5:1. In the $Cl_2/NH_3-N$ ratio of more than 5:1 and 6:1 respectively, THMs level was raised. Only the chloroform of THMs was insignificantly detected by both preformed chloramine and preammoniation applications, which was probably attributed to the stoichiometrically unstable equilibrium in the preparation of chloramine, whereas $CHCl_3$, $CHCl_2Br$ and $CHClBr_2$ of THMs were found in the application of free chlorine. However it turned out that the THMs levels by chloramine was incomparably inferior to that of free chlorine.

• Journal of the Korean Ceramic Society
• /
• v.29 no.9
• /
• pp.681-688
• /
• 1992

Ultrafine Si3N4 and Si3N4+SiC mixed powders were synthesized through thermal plasma chemical vapor deposition(CVD) using a hybrid plasma, which was characterized by the supersposition of a radio-frequency plasma and arc jet. The reactant SiCl4 was injected into an arc jet and completely decomposed in a hybrid plasma, and the second reactant CH4 and/or NH3 mixed with H2 were injected into the tail flame through double stage ring slits. In the case of ultrafine Si3N4 powder synthesis, reaction efficiency increased significantly by double stage injection compared to single stage one, although crystallizing behaviors depended upon injection speed of reactive quenching gas (NH3+N2) and injection method. For the preparation of Si2N4+SiC mixed powders, N/C composition ratio could be controlled by regulating the injection speed of NH3 and/or CH4 reactant and H2 quenching gas mixtures as well as by adjusting the reaction space.

• Korean Journal of Crystallography
• /
• v.8 no.2
• /
• pp.81-88
• /
• 1997

We investigated the CVPE grown of GaN thin films on (0001) sapphire using the $GaCl_3$ and $NH_3$ as source gases. The growth temperatures are ranged 970 to $1040^{\circ}C$ with the various flow rate ratio of source gases. The nitridation treatment was performed using the $NH_3$ gas before the GaN deposition. The optimal growth conditions were determined to be; growth temperature of $1040^{\circ}C$, III/V flow rate ratio of 2, nitridation time of 3 min. The FWHM at the (0002) peak from the XRD analysis was shown to be 0.32 deg. for the sample grown under those conditions. The growth rate was about $40{\mu}m/hr$ at $1040^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.273-279
• /
• 1990

For poly- $\beta$ -hydroxybutyrate (PHB) production, a pink-pigmented facultative methylotrophic bacterium (PPFM) P-10 was newly isolated from soils through methanol-enrichment culture. The optimal medium composition for cell growth was 1.0% (vlv) of methanol as carbon source and l.Og/l of ,TEX>$NH_4Cl$, equivalent to C/N ratio of 13.2 at pH 7.0 and $30^{\circ}C$. To investigate the optimal condition for YHB accumulation, two-stage culture technique was adopted; first stage for cell growth and second stage for accumulation of PHB providing unbalanced growth conditions. The optimal PHB accumulation was 1.0% (vIv) of methanol and 0.26gll of $NH_4Cl$, C/N of 50.8 at pH 6.0. To overcome methanol inhibition on cell growth, intermittent feeding fed-batch culture technique was employed, and the cell concentration as high as 14gll with 40% of PHB was achieved. The purified PHB was identified using IR and $1^H NMR$ as homopolymer of 8hydroxybutyric acid. The absorption spectrum of extracted pink colored microbial pigment was alsa investigated.

• Clean Technology
• /
• v.28 no.4
• /
• pp.309-315
• /
• 2022

Research was conducted to derive the optimal operation conditions and the optimal cathode for using a DSA electrode as an anode to minimize electrode consumption during the removal of nitrogen from wastewater by the electro-chemical method. Of the various electrodes tested as cathodes, brass was determined to be the optimal electrode. It had the highest NO₃-N removal rate and the lowest concentration of residual NH₃-N, a by-product when Cl is present in the solution. Investigating the effect of current density found that when the initial concentration of NO₃-N was 50 mg L^-1, the optimal current density was 15 mA cm^-2. In addition, current densities above 15 mA cm^-2 did not significantly affect the NO₃-N removal rate. The effect of electrolytes on removing NO₃-N and minimizing NH₃-N was investigated by using Na₂SO₄ and NaCl as electrolytes and varying the reaction times. When Na₂SO₄ and NaCl are mixed at a ratio of 1.0 g L^-1 to 0.5 g L^-1 and reacted for 90 min at a current density of 15 mA cm^-2 and an initial NO₃-N concentration of 50 mg L^-1, the removal rate of NO₃-N was about 48% and there was no residual NH₃-N. On the other hand, when using only 1.5 g L^-1 of NaCl as an electrolyte, the removal rate of NO₃-N was the highest at about 55% and there was no residual NH₃-N.