• Title/Summary/Keyword: $CcH_2$

Search Result 407, Processing Time 0.029 seconds

Quality characteristics of soybean sprouts packaged with different packaging materials during their storage (포장 필름의 종류에 따른 저장 중 콩나물의 품질특성)

  • Hwang, Tae-Young
    • Food Science and Preservation
    • /
    • v.20 no.5
    • /
    • pp.602-607
    • /
    • 2013
  • Correct packaging enables processors to pack fresh produce and extend its shelf life. This study was carried out to investigate the effect of different packaging materials on the weight loss, pH, $O_2$, $CO_2$ and sensory characteristics of soybean sprouts during their storage at $5^{\circ}C$ for seven days. Soybean sprouts ($320{\pm}20g$) were packaged with oriented polypropylene (OPP) and cast polypropylene (CPP) films, respectively. The $O_2$ transmission rate of the packaging materials was set to have a control of $10,000cc/m^2$.day.atm, and an OP15 and CP15 with $15,000cc/m^2$.day.atm through a pre-screening test. The average weight loss of the soybean sprouts during their storage was less than 10%, and that of the soybean sprouts with a CPP film was higher than that of the OPP film. The pH of the soybean sprouts increased during their storage regardless of their packaging materials; but compared to the pH of the soybean sprouts packaged with OPP, those packaged with CPP were higher. The $CO_2$ content of the packaging increased with a decrease in the $O_2$ content. The ratio of $CO_2$ to $O_2$ in the soybean sprouts with the OPP film was 3.5 times higher than in the soybean sprouts with the CPP film. The results of the overall sensory test showed that the marketability of the soybean sprouts packaged with OPP film and stored at $5^{\circ}C$ seemed to have been maintained effectively for six days (at a $15,000cc/m^2$.day.atm $O_2$ transmission rate). When the correlation coefficients of the control, OP15 and CP15 were analyzed, the highest correlation was shown between a control and OP15 (0.986; p<0.01).

Measurement and Analysis of the Flux Profiles of the Coated Conductors using Magneto-optical Image and Scanning Hall Probe (Coated conductor에서 magneto-optical image와 scanning hall probe를 이용한 flux profile의 측정 및 분석)

  • Lee, H.Y.;Kwak, K.S.;Rhyee, J.K.;Yoo, J.;Youm, D.
    • Progress in Superconductivity
    • /
    • v.11 no.2
    • /
    • pp.128-134
    • /
    • 2010
  • The magnetic flux profiles in SmBCO and YBCO coated conductors(CC) in the presence of the external field were comparatively investigated by magneto-optic image and scanning hall probe measurements. The current distributions calculated by using the inversion method from measured field profiles show that the decrease of current densities near the edges of SmBCO CC is more significant than those of YBCO CC. Through the comparison of the numerical analysis based on Kim's critical state model and the Brandt and Indenbom's solution, we found that this feature is related to their different field dependant properties of the critical current densities.

Experimental Study on the Microencapsulated PCM as a Thermal Storage Medium (미립잠열재를 이용한 축열 특성에 관한 실험적 연구)

  • 이효진;이재구
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.13 no.2
    • /
    • pp.80-87
    • /
    • 2001
  • Microencapsulated PCM particles are mixed with distilled water and utilized to evaluate its characteristics and performance as a thermal storage medium transporting heat. For the present study, tetradecane(C$_14H_30, T_m=5.5^{\circ}C$) is capsulated in the core with the melamine of its surface. The size of particles is well-controlled under 10${\mu}{\textrm}{m}$ in the way of in-situ polymerization with melamine-formaldehyde resin. For the experiment, the concentrations of slurries are prepared for 20wt%, 30wt%, and 40wt%. The results are compared with those of water and 100% tetradecane oil. The pure water and tetradecane start solidifying within 20 minutes after introducing cooling water into the thermal storage tank whose tank whose flow rates are varied by 125cc/min, 250cc/min, and 500cc/min. However, MicroPCM slurries are required relatively longer period of time for their phase change than pure phase change materials. That is, the entrained MicroPCM particles control its heat transfer in terms of natural convection and conducting to them.

  • PDF

Study on Scale-up of Electro-Electrodialysis [EED] Cell for HI Concentration (HI 농축을 위한 전해-전기투석 셀의 스케일-업에 관한 연구)

  • Lee, Sang-Ho;Hong, Seong-Dae;Kim, Jeong-Keun;Hwang, Gab-Jin;Moon, Il-Sik
    • Journal of Hydrogen and New Energy
    • /
    • v.18 no.4
    • /
    • pp.458-463
    • /
    • 2007
  • An experimental study on scale-up of Electro-electrodialysis(EED) to increase the efficiency of HI decomposition section in the IS(Iodine-Sulfur) process was carried out. The EED stack extends the effective area of the membrane to 20 times of that formerly used in a single EED unit cell. The experiment was carried out using HIx solution($HI:H_2O:I_2=1:8.4{\sim}9:1.85{\sim}1.9$) at $100^{\circ}C$ and various solution flow rates of 20, 30, 40 and 50 cc/min. The increased HI molality in catholyte after one-pass throughout from the EED stack was 3 mol/kg-$H_2O$, 2.2 mol/kg-$H_2O$, 2 mol/kg-$H_2O$ and 1.37 mol/kg-$H_2O$ at 20, 30, 40 and 50 cc/min, respectively. These values satisfied the target of HI molality(the increase of HI molality: 2 mol/kg-$H_2O$) in the IS process for hydrogen production of 20 L/hr.

Comparisons of Soil Characteristics between Campsites and Their Adjoining Forest Areas in the Eastern Area of Jirisan National Park (지리산국립공원 동부지역 야영장 조성지와 인접 산림지역의 토양 특성 비교)

  • Kim, Choon-Sig;Jang, Kyoung-Su;Lee, Hong-Woo;Cho, Hyun-Seo
    • Korean Journal of Environment and Ecology
    • /
    • v.21 no.6
    • /
    • pp.487-493
    • /
    • 2007
  • This study was carried out to evaluate soil property between campsites located at Joongsanri, Daewonsa old, Daewonsa new, Baekmudong and their adjoining forest areas in the eastern area of Jirisan National Park. The survey results showed that there existed a significant difference(p<0.05) between the two areas in soil property, such as soil bulk density, soil hardness, soil pH, water infiltration and soil respiration rates. However, there was no difference in soil property by depth between surface soil($0{\sim}15cm$) and subsurface soil($15{\sim}30cm$) for the two areas(p>0.05). In case of soil bulk density, its values in campsites were significantly higher ($1.29{\sim}1.44g/cm^3$) than in forest areas($0.95g/cm^3$), while soil hardness was significantly lower(p<0.05) in forest areas($1.44kg/cm^2$) than in campsites($2.9{\sim}4.0kg/cm^2$). Soil pore space was significantly lower in campsites($45.7{\sim}51.4%$) than in forest areas(64.3%), and soil pH in forest areas indicated pH 5.46 and that of the campsites was distributed at the range from pH 6.49 to pH 6.38. In addition, water infiltration was significantly lower in campsites($0.79{\sim}2.06cc/sec$) than in forest areas(18.7cc/sec), while soil respiration rates were significantly higher in forest areas($0.58gCO_2/m^2/h$) than in campsites($0.13{\sim}0.34gCO_2/m^2/h$).

Synthesis of Alkylidyne Complexes of Br$(CO)_2(tmeda)M{\equiv}CC_{6}H_{4}Me$ (M = Cr, Mo, W). Crystal Structure of Br$(CO)_2(tmeda)M{\equiv}CC_{6}H_{4}Me$

  • Park, Joon T.;Cho, Jeong-Ju;Suh, Il-Hwan;Lee, Jin-Ho;Lim, Sung-Su;Ryu, Bo-Young
    • Bulletin of the Korean Chemical Society
    • /
    • v.14 no.2
    • /
    • pp.266-271
    • /
    • 1993
  • The reaction of $(CO_5$)M=C(OMe)Tol (M=Cr, Mo, W and $Tol=p-C_6H_4Me)$ and $BBr_3$ followed by treatment with tetramethylethylenediamine (TMEDA) yields a mixture of two diastereomers, trans, $cis-Br(CO)_2(tmeda)M{\equiv}$CTol [M=Cr(1a), Mo(2a), W(3a)] and cis, $trans-Br(CO)_2(tmeda)M{\equiv}$CTol [M=Cr(1b), Mo(2b), W(3b)], respectively. These compounds have been isolated as crystalline solids and characterized by spectroscopic (infrared, mass, $^1H$ and $^{13}C-NMR)$ data. The trans, cis-Br(CO)2(tmeda)Cr${\equiv}$CTol (1a), has been examine via a single crystal X-ray diffraction study : $BrCrO_2N_2C_{16}H_{23}$, Mr=407.27, triclinic, $P{\bar{1}},\;a=12.792(2),\;b=13.400(5),\;c= 11.645(4)\;{\AA},\;{\alpha}=101.26(2)^{\circ},\;{\beta}=103.04(2)^{\circ},\;{\gamma}=91.88(2)^{\circ},\;{\nu}=1907(1){\AA}^3,\;Z=2,\;{\rho}(calcd)=1.418\;gcm^{-3},\;{\lambda}(MoK{\alpha})=0.71069\;{\AA},\;{\mu}=26.25 cm^{-1},\;F(000)=831.97,\;T=295K,\;R=0.0977$ for 1332 significant reflections $[F_0>5{\sigma}(F_0)]$. There are two essentially equivalent molecules in the crystallographic asymmetric unit. Each molecule is octahedral with the bromide ligand trans to the alkylidyne carbon, the two cis-carbonyl ligands, and the bidentate TMEDA ligand.

Combustion Characteristics and Durability of Diesel Engines Burning BDF 20 (BDF 20을 사용하는 디젤기관들의 연소 및 내구특성)

  • Ryu, Kyung-Hyun;Oh, Young-Taig
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.15 no.3
    • /
    • pp.18-28
    • /
    • 2007
  • Three diesel engines were fueled with BDF 20, a blend of 80% diesel fuel and 20% biodiesel fuel by volume, and run in excess of 200 h to evaluate their combustion characteristics and durability. The engines used for this study were a 4-cylinder 2476-cc displacement IDI diesel engine(Engine 1), a 4-cylinder l732-cc displacement IDI diesel engine(Engine 2), and a single cylinder 673-cc displacement DI diesel engine(Engine 3). Engine dynamometer testing was performed on each engine at regularly scheduled intervals to monitor the performance and exhaust emissions, which were sampled at 1h intervals for analysis, The peak combustion pressure with BDF 20 increased in Engines 1 and 3 over that measured when burning pure diesel fuel, but that in Engine 2 remained constant. Combustion parameters, such as the maximum combustion pressure and corresponding crank angle, did not change over the long-term dynamometer testing. The BSFC with BDF 20 in Engine 1 was less than that measured with pure diesel fuel. The amount of smoke produced with BDF 20 was less for all engines ; the greatest reduction was observed for Engine 3. The NOx emissions were lower in the IDI engines than the DI engine. The traditional trade-off between smoke and NOx emissions was maintained for BDF 20 fuel for Engines 1 and 3. There was not a big difference in the $CO_2\;and\;O_2$ emissions for BDF 20, as compared to pure diesel fuel, but more $CO_2$ was exhausted by Engine 1 than by Engines 2 or 3 and less $O_2$ was exhausted by Engine 1 than by Engines 2 or 3. The engine parts remained clean, except for some carbon attached to the area surrounding the nozzle hole of the DI diesel engine.

Pregnancy Rate by Intrauterine Insemination (IUI) with Controlled Ovarian Hyperstimulation (COH) (자궁강내 인공수정에 의한 임신율)

  • Hong, Jeong-Eui;Lee, Ji-Sam
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.25 no.2
    • /
    • pp.217-231
    • /
    • 1998
  • The effectiveness of intrauterine insemination (IUI) combined with controlled ovanan hyperstimulation (COH) in the treatment of infertility with various etiologies was compared in a total of 152 cycles. Patients received a maximum of three IUI cycles for the treatment. Severe male ($<2\times10^6$ motile sperm) or age factor (> 39 y) patients were excluded in this study. Pregnancy was classified as clinical if a gestational sac was seen on ultrasound. The overall clinical pregnancy rate was 7.9% per cycle (12/152) and 9.7% per patient (12/124). The pregnancy rates were 0% in unstimulated natural (0/18), 7.5% in CC (3/40), 8.2% in CC+hMG (4/49), 5.9% in GnRH-a ultrashort (1/17), 5.9% in GnRH-a long (1/17) and 27.3% in dual suppression cycles (3/11), respectively. The pregnancy rate was higher in dual suppression cycle than other stimulated cycles, but this was not significant. The multiple pregnancy rates were 25.0% (2 twins and 1 triplet). No patient developed ovarian hyperstimulation. Abortion rates were 66.7% in CC (2/3) and 100% in ultrashort cycles (1/1). The livebirth rate was 5.9% per cycle (9/152) and 7.3% per patient (9/124). There were no differences in age, duration of infertility, follicle size, total ampules of gonadotropins and days of stimulation between pregnant and non-pregnant groups. However, significant(P<0.05) differences were observed in the level of estradiol $(E_2)$ on the day of hCG injection ($3,266.6{\pm}214.2$ vs $2,202.7{\pm}139.4$ pg/ml) and total motile sperm count ($212.1{\pm}63.4$ vs $105.1{\pm}9.9\times10^6$) between pregnant group and non-pregnant group. These results suggest that IUI combined with successful ovarian stimulation tends to improve the chance of pregnancy as compared to IUI without COH and a total motile sperm count may be considered predictive of the success for pregnancy.

  • PDF

Clinical implication of adjuvant chemotherapy according to mismatch repair status in patients with intermediate-risk stage II colon cancer: a retrospective study

  • Kang, Byung Woog;Baek, Dong Won;Chang, Eunhye;Kim, Hye Jin;Park, Su Yeon;Park, Jun Seok;Choi, Gyu Seog;Baek, Jin Ho;Kim, Jong Gwang
    • Journal of Yeungnam Medical Science
    • /
    • v.39 no.2
    • /
    • pp.141-149
    • /
    • 2022
  • Background: The present study evaluated the clinical implications of adjuvant chemotherapy according to the mismatch repair (MMR) status and clinicopathologic features of patients with intermediate- and high-risk stage II colon cancer (CC). Methods: This study retrospectively reviewed 5,774 patients who were diagnosed with CC and underwent curative surgical resection at Kyungpook National University Chilgok Hospital. The patients were enrolled according to the following criteria: (1) pathologically diagnosed with primary CC; (2) stage II CC classified based on the 7th edition of the American Joint Committee on Cancer staging system; (3) intermediate- and high-risk features; and (4) available test results for MMR status. A total of 286 patients met these criteria and were included in the study. Results: Among the 286 patients, 54 (18.9%) were identified as microsatellite instability-high (MSI-H) or deficient MMR (dMMR). Although all the patients identified as MSI-H/dMMR showed better survival outcomes, T4 tumors and adjuvant chemotherapy were identified as independent prognostic factors for survival. For the intermediate-risk patients identified as MSI-low (MSI-L)/microsatellite stable (MSS) or proficient MMR (pMMR), adjuvant chemotherapy exhibited a significantly better disease-free survival (DFS) but had no impact on overall survival (OS). Oxaliplatin-containing regimens showed no association with DFS or OS. Adjuvant chemotherapy was not associated with DFS in intermediate-risk patients identified as MSI-H/dMMR. Conclusion: The current study found that the use of adjuvant chemotherapy was correlated with better DFS in MSI-L/MSS or pMMR intermediate-risk stage II CC patients.

Relationship between Stomach Volume and Tumor Location in Radiation Treatment for Hepatic Tumors (간 종양의 방사선치료에서 위내용적과 종양 위치 간의 관계)

  • Jeon, Mi-Jin;Lee, Chang-Geol;Lee, Ik-Jae;Choi, Won-Hoon;Choi, Yun-Sun;Shin, Dong-Bong;Kim, Jong-Dae;Kim, Sei-Joon;Ha, Jin-Suk;Cho, Yoon-Jin
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.22 no.2
    • /
    • pp.75-83
    • /
    • 2010
  • Purpose: It aims to evaluate the location change and tendency of hepatic and intrahepatic tumors according to gastric volume and change of location. Materials and Methods: It studied 9 patients with hepatic tumors who visited Gangnam Severance Hospital from March 2009 to April 2010 and who underwent CT or PET (Positron Emission Tomography) within 2 weeks before CT-simulation. The patients fasted for 6 hours before CT-simulation and drank 240~250 cc of water just before CT or PET for image fusion. Those two types of images were fused to RTP (Radiation Treatment Planning, Pinnacle 8.0h) focusing on bone structure of individual patients. Results: They drank 240~260 cc of water but their stomach volume after drinking water varied from 259.3 cc to 495.4 cc. Even though individual differences existed in the change of stomach volume before and after drinking water, the volume was increased by 130 cc (174%) on average. The change in absolute distance between the centers of tumors ranged from 0.52 cm to 3.04 cm (1.52 cm on average); from 0.1 cm to 1.35 cm (0.44 cm on average) in cranial-caudal direction; from 0.05 cm to 2.75 cm (1.22 cm on average) in left-right direction; and from 0.05 cm to 1.85 cm (0.33 cm on average) in ventral-dorsal direction. Conclusion: It is hard to predict the movement of tumors by observing stomach movement, due to great individual differences; however, it was observed that the location of hepatic tumors was right-sided as the stomach was filled with water. Thus, it is recommended to maintain the fastened state to secure the accuracy of hepatic tumor treatment. If it cannot maintain the fastened state, it is recommended to measure stomach volumes and movement in the patient to consider the movement of hepatic tumors before radiation treatment.

  • PDF