• Korean Journal of Ichthyology
• /
• v.22 no.2
• /
• pp.90-95
• /
• 2010

Blue devil (Pomacentrus caeruleus, also called Chrysiptera cyanea) is widespread in the Indo-Pacific Ocean and very popular all over the world as an aquarium fish because it is so easy to keep in a marine aquarium. However, tank-breeding techniques are not completely known. In this study, we reared blue devil and investigated its spawning ecology, as a necessary precursor for successful artificial-tank breeding. We investigated the spawning volume according to time with two types of calendars: solar and lunar. Rearing conditions were set at 30 ppt salinity, $27^{\circ}C$ water temperature, in two aquariums with water volumes of 80 and 125 L. We successfully bred P. caeruleus in this artificial-tank system. The aquarium fish formed a spawning harem with one male and more than two females. We harvested about 113,580 eggs in 44 spawning episodes by two spawning harems during the 11-month period from December to October. They showed a peak season of spawning volume and time in May and June. We confirmed the two peak points in spawning volumes and times, which coincided with the first quarter and last (third) quarter of the lunar phases of the moon.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.27 no.5
• /
• pp.625-630
• /
• 2013

Erectile dysfunction (ED) is a highly prevalent disorder that affects millions of men worldwide. ED is now considered an early manifestation of atherosclerosis, and consequently, a precursor of systemic vascular disease. Lycii fructus extracts (LFE) were administered for 4 weeks to assess the improving effects on ED. Animals were divided into one normal group and four LFE-treated groups (0, 0.3, 0.6, and 1.2 g/kg). We induced ED in the study animals by oral administration of 20% ethanol instead of water everyday for 4 weeks. This study was designed to investigate the effects of LFE on the mRNA levels of inducible nitric oxide synthase (iNOS) and endothelial NOS (eNOS) expression; NO levels of nitric oxide (NO) and cyclic guanosine monophosphate (cGMP); blood profile; and erectile response of the corpus cavernosum of the rat penis. The libido of the LFE-administered male rats was higher than that of the ethanol control group. The erectile response of the corpus cavernosum was restored after LFE administration, to a level similar to the normal group. In addition, the iNOS in the corpus cavernosum of the male rats administered LFE decreased. In contrast, compared to the control group, LFE-administered male rats showed increased eNOS, NO and cGMP levels in the corpus cavernosum. These results indicate that LFE effectively restored ethanol-induced ED in male rats.

• Journal of the Korean Ceramic Society
• /
• v.33 no.4
• /
• pp.391-398
• /
• 1996

In order to understand the electrostrictive behavior of Pb(Mg1/3Nb2/3)O3-PbTiO3(PMN-PT) solid solutions the dielectric constants and the electric-field-induced strains in (1-x)PMN-xPT (x=0.0-0.4) were investigated in the temperature range -5$0^{\circ}C$-20$0^{\circ}C$. Powder of (1-x)Pb(Mg2/3Nb2/3)O3-xPbTiO3 (x=0.0, 0.1, 0.2, 0.3, 0.35, and 0.4) were prepared from the oxide forms of Pb, Mg, Nb and Ti via a columbite precursor method As the amount of PbTiO3 increases the temperature of maximum dielectric constant(T$\varepsilon$max) increases and the phase transition become less diffusive. The strain maximum occurs only when the diffuse phase transition occurs from rhombohedral to cubic or rhombohedral to tetragonal as in x=0.1-0.35 The strains monotonically decrease with temperature in the materials in which phase transition occurs from tetragonal to cubic as in x=0.4.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.135-141
• /
• 1997

The early studies demonstrated that the relative amount of FSH was important for stimulating normal ovarian activity and demonstrated the existence of a threshold level for FSH, above which follicular growth was activated. It was found that only a modest increase in circulating FSH level above the threshold (between 10 and 30%) was required to stimulate folliculogenesis. In addition, FSH is primary responsible for initiating estradiol production through the activation of the aromatase enzyme system in granulosa cells, follicular secretion and growth. LH on the other hand, plays a supportive role in ovarian steroidogenesis, stimulating the ovarian thecal cells to produce androgen, the precursor for estradiol synthesis. But there is now an increasing number of reports in the literature demonstrating an adverse effect of LH on fertility and miscarriage in infertile and fertile women. So HP-FSH is the drug of a highly purified FSH preparation which has a higher specific activity and far fewer impurities than FSH. This study was performed to evaluate the efficacy and safety of HP-FSH administered (SC; subcutaneous) versus FSH(IM; intramuscular) for ovulation induction. 20 candidates patients for ovulation induction were participated. All patients underwent pituitary desensitizing with a long gonadotropin-releasing hormone (GnRH) agonist protocol and ovulation induction was started with HP-FSH SC (10 patients; group I) or FSH IM (10 patients; group II). After ovulation, outcome of ovulation induction and local reaction of injection site were compared. There were no difference of outcome of ovulation in two groups except pregnancy rate/embryo transfer. Group I had a higher pregnancy rate/ embryo transfer than Group II (44.4% Vs 28.6%). Pain, redness, tenderness, bruising and itching when the injection received on the first 5 days of treated (50 SC and 50 IM injections) were assessed. There were no significant difference (P>0.05) in the incidence of tenderness, bruising and itching between the IM and SC injection. But IM injection (FSH) had a tendency of higher above incidence. The number of reports of pain, redness were significantly increased in IM injection group (P<0.05). These results indicate that SC administration of HP-FSH has been shown to be as effect for superovulation as traditional gonadotropins, with an improved safety profile due to the removal of extaneous proteins.

• Journal of Aquaculture
• /
• v.9 no.1
• /
• pp.83-92
• /
• 1996

This study was conducted to compare the immunochemical properties of female-specific serum proteins (vitellogenin, VTG) and egg yolk proteins in female fusilier, Caesio diagramma. VTG of fusilier was identified and characterized by using immunochemical analysis. Two types of VTG (VTG1 and VTG2) reacted clearly with antiserum against egg proteins, were confirmed in the serum of mature female. The results of sephacryl S-300 showed that the molecular weights of VTG1 and VTG2 were 560,000 and 410,000, respectively. Yolk proteins, E2 and E3, were isolated from egg extracts, and molecular weights of them were estimated 410,000 and 170,000, respectively. The treatment of $17\beta$-estradiol ($E_2$) to males has induced the synthesis of VTG of which immunological characteristics seems to be similar to the yolk proteins. The results suggest that VTG can be synthesized in the liver by the action of $E_2$ stimulation, and incorporated into the oocytes through the blood circulation. The level of serum $E_2$ was moderately high throughout the spawning period of June. The level of serum VTG was also sustained at high in May and June. The concentration changes of serum $E_2$ and VTG were corelated to the ovarian development in female fusilier. The results indicated that $E_2$ may have some important roles for the vitellogenesis in female fusilier. Also) the VTG can be a precursor protein of yolk not only because it could be synthesized in the liver then incorporated into the oocytes but also because an egg yolk protein had the similiar molecular weights and antigenecity with VTG.

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.834-838
• /
• 2001

Attempts were made to improve mechanical properties of zirconia-based electrolyte by preparing yttria-stabilized cubic zirconia/alumina composite. It was performed by precipitating Yag precursor in aqueous m-zirconia slurry. The powder was separated and then followed by heat treatment with expecting yttria to react with m-$ZrO_2$ to give yttria stabilized zirconia and alumina to be dispersed homogeneously. When 17.8wt% Yag(6.3mol% $Y_2O_3$) was used, fracture toughness and strength were substantially improved from 1.44MPa${\cdot}m^{1/2}$ and 270Mpa for YZ8Y to 3.62MPa${\cdot}m^{1/2}$ and 447MPa respectively, but electrical conductivity at $^{\circ}$C in air was decreased from 0.126 to 0.057${\Omega}^{-1}cm^{-1}$. It seemed due to the presence of small amount of tetragonal zirconia. But when 21.58wt% Yag(8.0mol% $Y_2O_3$) was added, fracture toughness of 2.93MPa${\cdot}m^{1/2}$ and flexural strength of 388MPa were obtained with electrical conductivity of ${\Omega}^{-1}cm^{-1}$.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.11
• /
• pp.1659-1663
• /
• 2003

$Al_2O_3$ thin films were grown on H-terminated Si(001) substrates using dimethylaluminum isopropoxide [DMAl: $(CH_3)_2AlOCH(CH_3)_2$], as a new Al precursor, and water by atomic layer deposition (ALD). The selflimiting ALD process by alternate surface reactions of DMAI and $H_2O$ was confirmed from measured thicknesses of the aluminum oxide films as functions of the DMAI pulse time and the number of DMAI-$H_2O$ cycles. Under optimal reaction conditions, a growth rate of ~1.06 ${\AA}$ per ALD cycle was achieved at the substrate temperature of $150\;^{\circ}C$. From a mass spectrometric study of the DMAI-$D_2O$ ALD process, it was determined that the overall binary reaction for the deposition of $Al_2O_3\;[2\;(CH_3)_2AlOCH(CH_3)_2\;+\;3\;H_2O\;{\rightarrow}\;Al_2O_3\;+\;4\;CH_4\;+\;2\;HOCH(CH_3)_2]$can be separated into the following two half-reactions: where the asterisks designate the surface species. Growth of stoichiometric $Al_2O_3$ thin films with carbon incorporation less than 1.5 atomic % was confirmed by depth profiling Auger electron spectroscopy. Atomic force microscopy images show atomically flat and uniform surfaces. X-ray photoelectron spectroscopy and cross-sectional high resolution transmission electron microscopy of an $Al_2O_3$ film indicate that there is no distinguishable interfacial Si oxide layer except that a very thin layer of aluminum silicate may have been formed between the $Al_2O_3$ film and the Si substrate. C-V measurements of an $Al_2O_3$ film showed capacitance values comparable to previously reported values.

• The Korean Journal of Malacology
• /
• v.22 no.1 s.35
• /
• pp.13-22
• /
• 2006

Gonadosomatic index (GSI), oogenesis and reproductive cycle of Glossaulax didyma were investigated by the cytological histological obserbations and morphometric data. Samples were collected monthly from the intertidal zone of Biin Bay, Seocheon, Korea, for one year. Monthly variations in the GSI showed similar patterns with gonadal development. In the early vitellogenic oocyte, the Golgi complex and mitochondria were invovled in the formation of lipid droplet and yolk precursor. In the late vitellogenic oocytes, the rough endoplasmic reticulum and multivesicular bodies were involved in the formation of profeid yolk granules in the cytoplasm. A mature yolk granule was composed of three components: main body (central core), superficial layer, and the limiting membrane. The spawning season was from early June to late August, and the main spawning occurred between July and August when the seawater temperature was above $19^{\circ}C$. The female reproductive cycle can be classified into five successive stages: early active stage (December to February), late active stage (February to March), ripe stage (April to July), spawning stage (June to August), recovery stage (August to November). Fully mature oocytes were approximately $250-270{\mu}m$ in diameter.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.141-146
• /
• 1994

As a foundational study for processing persimmon leaves tea, the physico-chemical characters were investigated in persimmon leaves from Chungdo Bansi, Sagoksi, Kyungsan Bansi and Hiratanenasi during growth. Flesh weights increased rapidly until the middle of May and then decreased slightly. Moisture contents decreased continuously from $79{\sim}81%$ at the beginning of May during growth. Water soluble tannin contents reached $1.55{\sim}2.25%$, maximum values at the middle of May and at the beginning of June, and increased again at the middle of July and then decreased. Contents of catechins, precursor of condensed tannin, indicated $12{\sim}27\;mg%$ at the middle of May and reached $17{\sim}34\;mg%$, maximum values at the middle of June. Contents of catechin were low in order of (+)-catechin, (-)-epicatechin, (-)-epicallocatechingallate, (-)-epigallocatechin and (-)-epicatechingallate. Sugars present in persimmon leaves were composed of sucrose, glucose, fructose, raffinose and mannitol. Sucrose increased continuously, glucose and fructose decreased during growth. Raffinose content was less than 0.1%. Glucose and fructose took more than 90% until the beginning of May, and then sucrose took up $60{\sim}80%$ of total sugar contents. Total vitamin C contents indicated maximum values at the middle of May and at the beginning of June in Chungdo Bansi, Sagoksi and Kyungsan Bansi, maximum vaule at the middle of July in Hiratanenasi. From the basis of these data It was suggested that proper period for picking persimmon leaves prior to processing persimmon leaves tea was from the middle of May to the beginning of June. Since maximum values for most of chemical components occurred at the middle of May and at the beginning of June and persimmon leaves thicken after the middle of June.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.15-19
• /
• 2022

Purpose [⁶⁸Ga]PSMA-11 is needed the high reproducibility, excellent radiochemical yield and purity. In term of radiation safety, the radiation exposure of operator for its production also should be considered. In this work, we performed a comparative study for the fully automated synthesis of [⁶⁸Ga]PSMA-11 between non-cassette type and cassette type. Materials and Methods Two different type of modules (TRACERlab FX N pro for non-cassette type and BIKBox for cassette type) were used for the automated production of [⁶⁸Ga]PSMA-11. According to the previously identified elution profile, Only 2.5 ml with high radioactivity was used for the reaction. After adjusting the pH of the reaction solution with HEPES buffer solution, the precursor was added and reacted with at 95 ℃ for 15 minutes. The reaction mixture was separated and purified using a C18 light cartridge. The product was eluted with 50% EtOH/saline solution and diluted with saline. It was completed by sterilizing filter. In the non-cassette type, the aforementioned process must be prepared directly. However, in the cassette method, synthesis was possible simply by installing a kit that was already completed. Results Both total [⁶⁸Ga]PSMA-11 production time were 25±3(non-cassette type) and 23±3 minutes(cassette type). The radiochemical yield of the non-cassette type(65.5±5.7%) was higher than that of the cassette type(61.6±4.8%) after sterilization filter. The non-cassette type took about 120 minutes of preparation time before synthesis due to washing of synthesizer and reagent preparation. However, since the cassette type does not require washing and reagent preparation, it took about 20 minutes to prepare before synthesis. Both type of synthesizer had a radiochemical high purity(>99%). Conclusion The non-cassette type production of [⁶⁸Ga]PSMA-11 showed higher radiochemical yield and lower cost than the cassette type. However, The cassette type has an advantage in terms of preparation time, convenience, and equipment maintenance.