• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.913-921
• /
• 2021

Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.2
• /
• pp.99-105
• /
• 2000

The classifying distribution by the action style was opticion 100, photoartist 100, college student 100 for the simple myopic 35%, for the simple myopic astigmatism 2%, for the compound myopic astigmatism 30.6% for the mixed astigmatism 62.6% for the compound hyperopic astigmatism 37.4% for the ratio of emmetropia 22.4% respectively. The retractive erroreye were -0.50~-2.00Dptr for the simple myopia 14%, -2.00~-6.00Dptr 16%, -6.00Dptr 5%, C-0.25(90.180)~C-2.00DptrAxis(90, 180) 2% for the simple myopicastigmatismS-0.25C-0.25DptrAxis(90, 180)~S-1.00C-1.00DptrAxis (90, 180) 22.6%, S-1.00C-1.00 DptrAxis (90, 180)~S-2.00C-2.00DptrAxis(90, 180) 8% for the compound myopic astigmatism. S+0.25C -0.25DptrAxis(90, 180)~S+2.00C-2.00DptrAxis(90,180) 6.2% for the mixed astigmatism. S+0.25C+0.25DptrAxis(90,180)~S+1.00C+1.00DptrAxis(90,180) 3.4%, S+1.00C+1.00DptrAxis(90,180)~S+2.00C+2.00DptrAxis(90,180) 0.34% for the compound hyperopic astigmatism.

• Journal of the Korean Ceramic Society
• /
• v.35 no.12
• /
• pp.1336-1336
• /
• 1998

A twt -step carbothermal reduction scheme has been employed for the synthesis of SiC whiskers in an Ar or a H2 atmosphere via vapor-solid two-stage and vapor-liquid-solid growth mechanism respectively. It has been shown that the whisker growth proceed through the following reaction mechanism in an Ar at-mosphere : SiO2(S)+C(s)-SiO(v)+CO(v) SiO(v)3CO(v)=SiC(s)whisker+2CO2(v) 2C(s)+2CO2(v)=4CO(v) the third reaction appears to be the rate-controlling reaction since the overall reaction rates are dominated by the carbon which is participated in this reaction. The whisker growth proceeded through the following reaction mechaism in a H2 atmosphere : SiO2(s)+C(s)=SiO(v)+CO(v) 2C(s)+4H2(v)=2CH4(v) SiO(v)+2CH4(v)=SiC(s)whisker+CO(v)+4H2(v) The first reaction appears to be the rate-controlling reaction since the overall reaction rates are enhanced byincreasing the SiO vapor generation rate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.43-47
• /
• 2001

The classifying distribution by the Spherical lens and Aspherical lens was middle myopic, middle myopic astigmatism middle mixed astigmatism compared. The refractive erroeye spherical lens were S-3.00 ~ S-6.00Dptr for the middle myopic 16%, S-6.00Dptr 19%, S-3.00C-0.50(90.180) ~ S-6.00C-2.00Asix(90.180)57%, S-3.00C+0.50(90.180) ~ S-6.00C+2.00Axis(90.180) 8% for the compound myopic astigmatism. Aspherical lens were S-3.00 ~ S-6.00Dptr for the middle myopic 31%, S-6.00Dptr 36%, S-3.00C-0.50(90.180) ~ S-300C-2.00Axis(90.180) 21%, S-3.00C+0.50(90.180) ~ S-3.00C+2.00Axis(90.180)12%, for the compound hyperopic astigmatism.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.65-70
• /
• 2001

We obtained the sum of two curvature ($C_x+C_y$) in toric lens which two toroidal surface is the right angle each other. $$C_x+C_y=\frac{x^2+y^2}{2r_1}+\frac{x^2}{2}(\frac{1}{r_2}-\frac{1}{r_1})$$ and the sum of two curvature ($C_a+C_b$) in toric lens about the cross angle. $$(C_a+C_b)=\frac{x^2cos^2{\alpha}_1}{2r_1}+\frac{x^2cos^2{\alpha}_2}{2r_2}+\frac{y^2sin^2{\alpha}_1}{2r_1}+\frac{y^2sin^2{\alpha}_2}{2r_2}$$ and claculated the parameter S, C, ${\theta}$ of a combination power in toric lens of the cross angle including surface curvature ($C_x$, $C_y$) values. $$S=(n-1)\[\frac{C_x}{x^2}+\frac{C_y}{y^2}\]-\frac{C}{2},\;C=-\frac{2(n-1)}{sin2{\theta}}\[\frac{C_x}{x^2}+\frac{C_y}{y^2}\]$$ $${\theta}=\frac{1}{2}tan^{-1}\[-\frac{{C_xy^2sin2{\theta}_1}+{C_yx^2sin2{\theta}_2}}{{C_xy^2cos2{\theta}_1}+{C_yx^2cos2{\theta}_2}}\]$$.

• Cement
• /
• s.51
• /
• pp.20-30
• /
• 1973

1) electron-microprobe를 응용하여 $CaO-SiO_2-Al_2O_3$ 계에서 생성한 $C_2S$, $C_3S$ 에 존재하는 sulfate의 solid, solution을 정량적으로 구할 수 있었으며 이 결과로 $C_2S$ 에 $Al_2O_3$, $SO_3$ 등이 solid soln 등으로 침적되고 이들이 $C_3S$의 생성을 억제한다는 mechanism이 확인되었다. 2) phase equilibrium(상평형)에 의하면 $Na_2SO_4$, $K_2SO_4$는 mineralizer로서 작용하며 $C_3S$ 의 생성을 돕는다. 그러나 $K_2SO_4$ 와 $Al_2SO_3$ 가 결합상태로 존재할 경우는 1,400 $^{\circ}C$에서 광범위한 liquid를 생성하며 quenching하면 glass질과 $\beta-C_2S$ 만이 얻어지고 $C_3S$ 는 생성되지 않는다. 또 이를 1,250 $^{\circ}C$ 까지 서냉하면 $C_2S$ 와 Ca, K, Al, S, 등을 함유한 새로운 물질이 생성된다. 3) $CaO-SiO_2-Al_2O_3-Fe_2O_3$ 계에서 $C_3S$ 의 생성에 미치는 $Na_2SO_4$, $K_2SO_4$ 의 영향을 실험실적으로 검토한 결과 complex interaction이 확인되었으며 $Na_2SO_4$ 는 어떤 경우에는 mineralizing effect를 상실한다는 재미 있는 사실이 발견되었다.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.45-53
• /
• 2004

The fact that the end-user response time could become unacceptable in the 2-tier C/S system has been well known to C/S system developers. But inexperienced new developers who want to provide mobile solutions using PDA sometimes do not realize the ominous consequences of the 2-tier C/S systems. Except for the easy of development. the 2-tier C/S system has many weak points like in application deployment, security, scalability, application reuse, heterogeneous DBMS support, availability. and response time. This paper analyzes the response time in the 2-tier and 3-tier C/S systems through simulation. Although the problem space is confined to the 2 and 3 tiers, the result could be equally applied to any multi-tier systems.

• Elastomers and Composites
• /
• v.51 no.4
• /
• pp.286-300
• /
• 2016

$MoS_2$ precursors were synthesized by reacting thioacetamide ($C_2H_5NS$) with sodium molybdate dihydrate ($Na_2MoO_4{\cdot}2H_2O$) in aqueous HCl solution. $MoS_2$ nanoparticles were prepared from dried $MoS_2$ precursors by calcination in an electric furnace at $700^{\circ}C$ for 2 h under an inert argon atmosphere. $MoS_2-C_{60}$ nanocomposites were obtained by heating $MoS_2$ nanoparticles and fullerene ($C_{60}$) together in an electric furnace at $700^{\circ}C$ for 2 h. Their morphological and the structural properties were characterized by powder X-ray diffraction and scanning electron microscopy. The $MoS_2$ nanoparticles and $MoS_2-C_{60}$ nanocomposites were used as catalysts in the reductions of 2-, 3-, and 4-nitrophenol in the presence of sodium borohydride. The photocatalytic activities of the $MoS_2$ nanoparticles and $MoS_2-C_{60}$ nanocomposites were evaluated in the degradation of organic dyes (brilliant green, methylene blue, methyl orange, and rhodamine B) under ultraviolet light (254 nm).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.24-25
• /
• 2017

Gamma-C₂S (γ-C₂S) is a substance that is difficult to react with water under normal temperature but can absorb a large amount of CO₂ in the air. The addition of γ-C₂S to cementitious materials through the curing of CO₂ can improve the pore structure and improve the durability of the material. In this study, three kind of Ca-bearing materials : CaO, Ca(OH)₂, CaCO₃, were calcined 2.5h at 1450℃ to synthesize γ-C₂S after mixing with SiO₂ respectively. Among them, Ca(OH)₂ mixed with SiO₂ after calcining shows highest content. Synthesized γ-C₂S was added to the cement mortar, after water curing for 1 month, accelerated carbonation test was experimented. After 28d accelerated carbonation test, pore structure will be detectived by MIP. Based on the MIP result, following the calculation method of Fractal theory, the pore structure will be quantitative described.