• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.188-192
• /
• 2000

In this study PZT etching was performed using planar inductively coupled Ar/Cl$_2$/BCI$_3$ plasma. The etch rate of PZT film was 2450 $\AA$/min at Ar(20)/BCl$_3$(80) gas mixing ratio and substrate temperature of 8$0^{\circ}C$. X-ray photoelectron spectroscopy(XPS) analysis for films composition of etched PZT surface was utilized. The chemical bond of PbO is broken by ion bombardment and Cl radical, and the peak of metal Pb in a Pb 4f narrow scan begins to appear upon etching. As increasing additive BCl$_3$content the relative content of oxygen decreases rapidly in contrast with etch rate of PZT thin film. So we though that the etch rate of PZT thin film increased because abundant B and BCl radicals made volatile oxy-compound such as B$_{x}$/O$_{y}$ and/or BClO$_{x}$ bond. We achieved etch profile of about 80$^{\circ}$ at Ar(20)/BCl$_3$(80) gas mixing condition and substrate temperature of 8$0^{\circ}C$TEX>X>.

• 한국식품영양과학회지
• /
• 제17권1호
• /
• pp.25-31
• /
• 1988

난각과 초산용액으로부터 조 calcium acetate 하여 두부용 응고제로의 활용성을 검토한 것이다. 난각을 $100^{\circ}C$에서 $20{\sim}30$분간 가열 살균하고 것을 $20{\sim}30$mesh로 분쇄한 후 난각분에 10%초산 용액을 가하여 난각의 calcium염중 Ca을 수용성인 calcium acetate$[(CH_3COO)_2Ca]$로 만들었다. 난각 1개의 무게는 약 5.6g이었고, 난각 1개로 부터 3.8g의 CCA를 얻을 수 있었다. 300g짜리 두부 1모들 만드는데는 난각 약 1.2개 필요하였다. 난각으로부터 얻은 응고제를 이용하여 만든 두부는 기존 응고제($MgCl_2$, $CaCl_2$등)를 이용하여 만든 두부와의 비교에서 즉 수율, 단백질함량, 경도 맛에서 큰차이가 없었다. 따라서 기존응고제 대신 CCA사용은 닭이라는 생체 중에서 농축된 calcium을 두부로 이행시킴으로써 폐기물을 활용하는 효과와 아울러 두부의 자연성을 높이는데 의미가 있다고 하겠다.

• Investigative Magnetic Resonance Imaging
• /
• 제9권1호
• /
• pp.30-35
• /
• 2005

목적 : 본 논문은 뇌 기능 자기공명영상(Brain Functional Magnetic Resonance Imaging: Brain fMRI)을 이용하여 짠 맛 자극에 대한 인지활동으로 뇌 신경세포의 활성화에 따른 국소 대사 및 혈류역학적 변화가 일어나는 뇌 영역을 분석 및 가시화함으로써 맛에 대한 뇌 활성화 부위의 기초자료를 마련하고자 하였다. 대상 및 방법 : 건강한 비흡연 남자 12명을 대상으로 1.5T MRI 장치에서 혈액산소수준의존(Blood Oxygen Level Dependent, 이하 BOLD) 방법을 이용한 fMRI 실험을 수행하여 인간의 미각 중 짠맛에 대한 반응을 관찰하였다. 잔 맛의 자극은 $3\%$ 농도의 소금물(NaCl)을 미각 자극기를 이용하여 혀 전체에 자극을 주었다. 미각 자극기인 Auto Syringe Pump는 일정한 자극을 반복적으로 가할 수 있도록 마이크로프로세서를 이용하여 연구실에서 자체 제작되었다. 자극의 패러다임은 5회의 휴식기간과 4회의 자극기간으로 구성되었으며, 자극기간은 15초씩 진행되고 휴식기간은 30초로 하여 각 slice당 42 영상을 연속적으로 획득하였다. 자극에 대해 얻은 fMRI 영상은 SPM99'(Statistical Parametric Mapping, UCL)를 이용하여 분석하였다. 활성화 영상은 EPI 영상과 동일한 부위의 T1 강조영상에 registration 기법을 이용하여 overlapping시켜 활성화 부위의 해부학적 판별을 용이하도록 하였다. 결과 : 농도 $3\%$ 소금물의 짠맛 자극에 대해서 insula, amygdala, frontal opercular taste cortex (OFC), orbitofrontal cortex 영역에서 활성화 영역을 fMRI로 확인하였으며, dorsolateral prefrontal cortex (DLPFC) 영역에서도 유효한 신호를 관찰하였다. 결론 : 본 연구의 결과는 미각의 주요 신경이 뇌의 insula, OFC 그리고 DLPFC 영역에 주로 분포한다는 기존의 결과와 잘 일치하고 있다. 마이크로 프로세서로 동작하는 자동펌프를 미각 자극기로 사용함으로써 미각자극에 대한 뇌의 활성화 영역을 안정되게 관찰할 수 있었다. 본 연구의 결과는 fMRI를 이용한 고차원적 미각작용 과정 연구에 튼튼한 밑거름이 될 것으로 생각된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.196-196
• /
• 2017

Oilseed crop Camelina (Camelina sativa L.) is a suitable for biodiesel production that has high adaptability under low-nutrient condition like marginal land and requires low-input cost for cultivation. Enhanced abiotic stress tolerance of Camelina is very important for oil production under the wide range of different climate. CsRCI2s (Rare Cold Inducible 2) are related proteins in various abiotic stresses that predicted to localized at plasma membrane (PM) and endoplasmic reticulum (ER). These proteins are consist of eight-family that can be divided into tail (CsRCI2D/E/F/G) and no-tail (CsRCI2A/B/E/H) type of C-terminal. However, it is still less understood the function of C-terminal tail. In this study, CsRCI2D/H genes were cloned through gateway cloning system that used pCB302-3 as destination vector. And we used agrobacterium-mediated transformation system for generation of overexpression (OX) transformants. Overexpression of target gene was confirmed using RT-PCR and segregation ratio on selection media. We analyzed physiological response in media and soil under abiotic stresses using CsRCI2D and CsRCI2H overexpression plant. To compare abiotic stresses tolerance, wild type and CsRCI2D/H OX line seeds were sown on agar plate treated with various NaCl and mannitol concentration for 7 days. In the test of growth rate under abiotic stress on media, CsRCI2H OX line showed similar to NaCl and mannitol stress. In the other hand, CsRCI2D OX line showed to be improved stress tolerance that especially increased in 200mM NaCl but was similar on mannitol media. In greenhouse, WT and CsRCI2D/H OX lines for physiological analysis and productivity under abiotic stresses were treated 100, 150, 200mM NaCl. Then it was measured various parameters such as leaf width and length, plant height, total seed weight, flower number, seed number. CsRCI2H OX line in greenhouse did not show any changes in physiological parameters but CsRCI2D OX line was improved both physiological response and productivity under NaCl stress. Among physiological parameters of CsRCI2D OX line under NaCl stress, leaf length and width were observed shorter than WT but it were slightly longer than WT in 200mM NaCl stress. Furthermore, total seed weight of CsRCI2D OX line under stress displayed to decrease than WT in normal condition, but it was gradually raised with increasing NaCl stress then more than WT relatively. These results suggested CsRCI2D might be contribute to improve abiotic stress tolerance. However, function of CsRCI2H is need to more detail study. In conclusion, overexpression of CsRCI2s family can generate various environmental stress tolerance plant and may improve crop productivity for bio-energy production.

• 한국안전학회지
• /
• 제11권3호
• /
• pp.126-136
• /
• 1996

Synthesis of perfluoromethanesulfonyl fluoride(PFMSF) which is a valuable precursor of perfluoro-chemicals such as surface modifier and fine chemicals was studied by electrochemical fluorination (ECF). In order to determine the termination of preelectrolysis, it was carried to monitor the variation of current during preelectrolysis by means of constant cell voltage operation. In a batch cell, chronopotentiometric electrolysis and various chemical analysis such as GC, GC/MS and If were used to understand the potential change of electrode and synthesis and control of hazardous gases products. Termination of preelectrolysis was determinated by measurement the current and/or detection of $F_2$ gas generation. And during the preelectrolysis, an amount of generated $OF_2$ was shown that a lot of moisture was absorbed from air when a cell was filled with anhydrous hydrogen fluoride( AHF ). Above 4V cell voltage, $F_2$ gas was generated and acted on any form of fluorinating agents. In the ECF of MSC (methane sulfonyl chloride) by constant current operation, the potential of anode was intimately relation with generation of $SO_2F_2$. Exchange of Cl to F was dominatly occured in a initial stage. There were various gaseous products including PFMSF as main product and $C_4$ compounds.

• Journal of Electrochemical Science and Technology
• /
• 제14권4호
• /
• pp.311-319
• /
• 2023

This work was performed to characterize the electrochemical behavior of AZ31 Mg alloy in neutral aqueous solutions where Cl^-, SO₄^2-, PO₄^3-, and F^- ions were present and pH was adjusted to 6 to exclude the contribution of H⁺ and OH^- ions. Open-circuit potential (OCP) transient, electrochemical impedance spectroscopy (EIS) and potnetiodynamic polarization curves were employed. The OCP value appeared to decrease in the order of F^- > Cl^- > SO₄^2- > PO₄^3- ions while corrosion current density increased in the same order. Electrochemical impedance spectroscopy (EIS) data showed two capacitive arcs in all the solutions and one more inductive arc appeared in PO₄^3--containing solution. By fitting of two capacitive arcs, capacitance of dense film (C_df), resistance of porous film (R_pf) and double layer capacitance (C_dl) and charge transfer resistance (R_ct) beneath the porous films were obtained. A simplified model in which various thicknesses and coverages of dense and porous films are assumed to be present on the AZ31 Mg alloy surface, is suggested to explain the effects of four different anions on the electrochemical behavior of AZ31 Mg alloy.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.453-454
• /
• 2004

Hydrogeochemical and isotopic characteristics were investigated for groundwater of Tertiary basin in southeastern part of Korea where deep drilling is in progress for geothermal investigation. According to geology, aquifer was distinguished as alluvial, tertiary sedimentary bedrock (bedrock groundwater), and fractured volcanic rock (deep groundwater). Groundwater of each aquifer is distinctively separated in Eh-pH conditions and concentrations of Cl, F, B and HCO$_3$. Deep groundwater has very low level 3H and 14C whereas alluvial groundwater has those of recent precipitation level. However one of deep groundwater show mixed characteristics in terms of hydrochemistry which indicates effect of pumping. Deep groundwater have temperature of 38 to 43$^{\circ}C$ whereas bedrock and alluvial groundwater have temperature less than 2$0^{\circ}C$. Fractured basement rock aquifer has different hydrogeologicalsetting from bedrock and alluvial aquifer considering hydrogeochemical and isotopic characteristics, and temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.192-195
• /
• 2000

Antimony doped tin oxyde thin films have been deposited by sol-gel method using non-alkoxide precursor SnCl$_2$$.$2H$_2$O as host and SbC1$_3$ as dopant material. Using spin coating method, thin films of thickness up to 200nm have been uniformly deposited on Corning 1737F non-alkali glass substrates. Effect of Sb doping concentration and heat treatment on electrical and optical properties was investigated. Heat treatment was performed at the temperature from 350$^{\circ}C$ to 650$^{\circ}C$ in flowing O$_2$. The resulting ATO films showed widely changing electrical resistivity and optical transmittance values in the visible spectrum depending on the composition and firing condition.

• 한국광물학회지
• /
• 제23권1호
• /
• pp.1-13
• /
• 2010

경북 영덕의 유금광상은 경상분지 북동부 백악기 화강암체 내에 배태되어 있으며, 함금 열수석영맥은 모암인 영해 화강섬록암 내에 $N19^{\circ}{\sim}38^{\circ}W$ 주향의 단층대를 따라 충진되었다. 열수 유체의 유입은 크게 세 시기로 나누어 볼 수 있는데, 첫 번째 시기는 광화되지 않은 소량의 석영맥이 생성되었고, 두 번째 시기에는 다량의 금속원소와 이에 수반된 금을 함유한 유체가 유입되었으며, 세 번째 시기에는 다량의 황화광물이 침전되었다. 금 광화작용을 수반한 열수 유체는 황철석, 황동석, 방연석, 섬아연석, 그리고 유비철석 등의 다양한 황화광물들을 침전시켰으며, 에렉트럼 내 Au의 함량은 최대 92 wt%까지 매우 높은 편이다. 초기 금 광화작용 시기의 유체의 온도와 압력은 각각 $220{\sim}250^{\circ}C$와 730~1800 bar의 범위를 보이며, 이때 산소분압은 $10^{-27}{\sim}10^{-31.7}$ atm에 이른다. 반면, 광화 후기에서의 유체의 온도와 압력은 각각 $250{\sim}350^{\circ}C$와 206~472 bar의 범위를 보이며, 산소분압은 $10^{-26.3}{\sim}10^{-28.6}$ atm에 해당하고, 황화광물과 $H_2S$의 ${\delta}^{34}S$ 값은 각각 $0.2{\sim}4.2^{\circ}/_{\circ\circ}$의 범위와 $1.0{\sim}3.7^{\circ}/_{\circ\circ}$범위를 보여준다. 유금광상에서 산출되는 에렉트럼은 0.15~1.10 범위의 Ag/Au 원자비를 보인다. 주광화작용이 진행되는 동안 비교적 높은 온도 조건과 4.5~5.5 의 pH 범위에서 광화유체 내에서 ${Au(HS)_2}^-$의 안정성을 감소되고, 상대적으로 ${AuCl_2}^-$ 의 안정성은 증가되었다. 압력조건을 고려 할 때 광화유체는 $350^{\circ}C$ 이상의 온도에 이르렀으며 용액 중 ${AuCl_2}^-$가 중요한 운반 수단이었을 것으로 생각된다. 광화작용이 진행되면서, 온도와 log $f_{o2}$의 감소가 일어남에 따라 ${AuCl_2}^-$의 용해도는 낮아지고 황화물들의 침전이 일어나며 이와 함께 에렉트럼도 침전하였을 것으로 생각된다.

• Archives of Pharmacal Research
• /
• 제17권6호
• /
• pp.420-423
• /
• 1994

Various N'-substituted anilino-N-methyl-N'-nitrosoureas(2a-n) were easily prepared from the reaction of substituted phenylhydraines $(3, 4-CH_3, {\;} 3-, {\;} 4-OCH_3, {\;} 3-, {\;} 4-F, {\;} 3, {\;} 4-Cl, {\;} 4-Br, {\;} 2-, {\;} 3-, {\;} 4-NO_2, 4-(NO_2)_2)$ with methyl isocyanate, followed by the nitrosation with 99% HCOOH and dry sodium lnitrite powder. Surprisingly, of these series of analogus, the anilino-nitrocosureas substituted with eletron-withdrawing nitro groups (2k-a) showed significantly low $ED_{30}$ values of $1.4-3.4 {\mu}g/ml.$ In addition, none of these copounds subtituted with electron-donating groups exhibited cytotoxicities.