• Journal of Pharmaceutical Investigation
• /
• v.35 no.5
• /
• pp.355-360
• /
• 2005

The purpose of the present study was to evaluate the bioequivalence of two cetirizine HCl tablets, Zyrtec tablet (UCB Pharm. Co., Ltd. Korea, reference product) and Zyrix tablet (Kukje Pharm. Co., Ltd., Korea, test product), according to the guidelines of Korea Food and Drug Administration (KFDA). After adding an internal standard (diazepam), plasma samples were extracted using 1 mL of dichloromethane. Compounds extracted were analyzed by reverse-phase HPLC with ultra-violet detector. This method for determination cetirizine is proved accurate and reproducible with a limit of quantitation of 10 ng/mL in male plasma. Twenty-four healthy male Korean volunteers received each medicine at the cetirizine HCl dose of 10 mg in a $2{\times}2$ crossover study. There was a one-week wash out period between the doses. Plasma concentrations of cetirizine were monitored for over a period of 24 hr after the administration. AUC (the area under the plasma concentration-time curve) was calculated by the linear trapezoidal rule. $C_{max}$ (maximum plasma drug concentration) and $T_{max}$ (time to reach $C_{max}$) were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed AUC and $C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals for the log transformed data were acceptable range of log 0.8 to log 1.25 $(e.g.,\;log\;0.93-log\;1.08\;for\;AUC_{0-t},\;log\;0.91-log\;1.08\;for\;AUC_{0-{\infty}}\;and\;log\;1.01-log\;1.11\;for\;C_{max})$. The major parameters, AUC and $C_{max}$ met the criteria of KFDA for bioequivalence indicating that Zyrix tablet is bioequivalent to Zyrtec tablet.

• YAKHAK HOEJI
• /
• v.6 no.1
• /
• pp.1-4
• /
• 1962

A new tannin, polygagallin, related to acertannin, is isolated from air-dried leaves of Acer ginnala Max. as prismatic crystals with 1/2 H$_{2}$O per mole, m.p.154-155.deg. and [.alpha.]$_{D}$$^{29}$ +43.79.deg. C. Polygagllin gives hexaacetate, m.p.164.5.deg. C, [.alpha.]$_{D}$$^{28}$ +42.deg. C, on treating with anhydroacetic acid and on treating with diazomethane, gives trimethyl ether, m.p.176.deg. C, [.alpha.]$_{D}$$^{22}$ +53.43, which yields triacetate, m.p.160.5.deg. C, [.alpha.]$_{D}$$^{22}$ + 132.5.deg. C, on acetylation and is not attacked by periodate. On hydrolysis, trimethoxypolygagallin yields one mole of polygalitol and that of trimethoxygallic acid. By the above results polygalallin has been established as 3-galloylpolygalito.ygalito.galallin has been established as 3-galloylpolygalito.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.87-92
• /
• 2016

Due to its stability at high temperature and its layered structure, $Ti_3SiC_2$ MAX phase was considered to the interphase of $SiC_f/SiC$ composite. In this study, $Ti_3SiC_2$ MAX phase powder was deposited on SiC fiber via the electrophoretic deposition (EPD) method. The Zeta potential of the $Ti_3SiC_2$ suspension with and without polyethyleneimine as a dispersant was measured to determine the conditions of the EPD experiments. Using a suspension with 0.03 wt.% ball milled $Ti_3SiC_2$ powder and 0.3 wt.% PEI, $Ti_3SiC_2$ MAX phase was successfully coated on SiC fiber with an EPD voltage of 10 V for 2 h. Most of the coated $Ti_3SiC_2$ powders are composed of spherical particles. Part of the $Ti_3SiC_2$ powders that are platelet shaped are oriented parallel to the SiC fiber surface. From these results we expect that $Ti_3SiC_2$ can be applied to the interphase of $SiC_f/SiC$ composites.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.2
• /
• pp.137-146
• /
• 1999

Interactions among dexamethasone, dehydroepiandrosterone (DHEA), lipopolysaccharide (LPS), and antimycin A on the glutamate uptake and the polyamine uptake were investigated in primary cultures of rat cerebral cortical astrocytes to examine the effects of dexamethasone and DHEA on the regulatory role of astrocytes in conditions of increased extracellular concentrations of glutamate or polyamines. 1. $[^3H]Glutamate$ uptake: LPS and antimycin A decreased $V_{max},$ but both drugs had little effect on $K_m.$ Dexamethasone also decreased basal $V_{max}$ without any significant effect on $K_m.$ And dexamethasone further decreased the antimycin A-induced decrease of $V_{max}.$ DHEA did not affect the kinetics of basal glutamate uptake and the change by LPS or antimycin A. 2. $[^{14}C]Putrescine$ uptake: LPS increased $V_{max},$ and antimycin A decreased $V_{max}.$ They showed little effect on $K_m.$ Dexamethasone decreased $V_{max}$ of basal uptake and further decreased the antimycin A-induced decrease of $V_{max},$ and also decreased $V_{max}$ to less than control in LPS-treated astrocytes. DHEA did not affect $K_m$ and the change of $V_{max}$ by LPS or antimycin A. 3. $[^{14}C]Spermine$ uptake: Antimycin A decreased $V_{max},$ and LPS might increase $V_{max}.\;K_m$ was little affected by the drugs. Dexamethasone decreased basal $V_{max}$ and might further decrease the antimycin A-induced decrease of $V_{max}.$ And dexamethasone also decreased $V_{max}$ to less than control in LPS-treated astrocytes. DHEA might increase basal $V_{max}$ and $V_{max}$ of LPS-treated astrocytes. 4. $V_{max}$ of glutamate uptake by astrocytes was increased by putrescine (1000 ${\mu}M$ & 2000 ${\mu}M$) and spermidine (200 ${\mu}M,$ 500 ${\mu}M$ & 2000 ${\mu}M$). Spermine, 200 ${\mu}M$ (and 100 ${\mu}M$), also increased $V_{max},$ but a higher dose of 2000 ${\mu}M$ decreased $V_{max}.\;K_m$ of glutamate uptake was not significantly changed by these polyamines, except that higher doses of spermine showed tendency to decrease $K_m$ of glutamate uptake. In astrocytes, dexamethasone inhibited the glutamate uptake and the polyamine uptake in normal or hypoxic conditions, and the polyamine uptake might be stimulated by LPS and DHEA. Polyamines could aid astrocytes to uptake glutamate.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.1
• /
• pp.107-113
• /
• 2014

PURPOSE: The purpose of this study was to investigate the correlation between craniovertebral angle (CVA) and cardiorespiratory function ($VO_2max$ and $VCO_2max$) in young adults. METHODS: For this study, the students of D college were questioned and 50 members of D college were participated in our research.. Side-view pictures of each subject were taken in standing positions, in order to assess forward head posture (FHP) by measuring the craniovertebral angle. The craniovertebral angle was measured as the angle between a horizontal line at C7 and a line from the tragus of the ear to the spinous process of C7. And $VO_2max$ and $VCO_2max$ were measured by Quark CPET (cosmed co, USA) while the subjects were performed the treadmill running task of a intensity to set with respiratory mask. Subjucts were Then Pearson's correlation coefficient was calculated to estimate the relationship between craniovertebral and cardiorespiratory function ($VO_2max$ and $VCO_2max$) using SPSS for window. RESULTS: There was a significant positive correlation between craniovertebral angle and $VO_2max$ during treadmill running task (r=0.528, p<0.05). And there was a significant positive correlation between craniovertebral angle and $VO_2max$ during treadmill running task (r=0.566, p<0.05). CONCLUSION: Foreward head posture is related to cardiorespiratory function, and it has a negative correlation with cardiorespiratory function.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.260-264
• /
• 2016

The MAX77846, which is compatible with MAX77826, is a sub-power management IC (PMIC) for the latest Wearable Watch and 3G/4G smart phones. The MAX77846 contains N-MOSFET (N channel Metal-Oxide Semiconductor Field-Effect Transistor), a high-efficiency regulator, and comparator, etc to power up peripherals. The MAX77846 also provides power on/off control logic for complete flexibility and an $I^2C$ (Inter Integrated Circuit) serial interface to program individual regulator output voltages. In this paper, the simplified power macro-model based on MAX77846 is designed to verify the performance of the battery voltage in terms of current and time, and simulated by using of the LTspice. In addition, it is verified how much time can the charged battery capacity for Samsung Galaxy Gear 2 be used to operate a specified function after measuring the currents flowing to carry out the main functions in real time, which will be applicable to design parameters for the advanced power module

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.451-456
• /
• 2009

The purpose of the present study was to evaluate the bioequivalence of two ciprofloxacin tablets, Ciprobay (Bayer Korea Ltd.) and Rofcin (Binex Co., Ltd.), according to the guidelines of Korea Food and Drug Administration (KFDA). The release of ciprofloxacin from the two ciprofloxacin tablets in vitro was tested using KP XIII Apparatus I method with dissolution media (0.01 M HCl). The dissolution profiles of two ciprofloxacin tablets were very similar at dissolution media. Twenty four healthy male volunteers were divided into two groups and a randomized 2$2{\times}2$2 cross-over study was employed. After one tablet (250 mg ciprofloxacin) was orally administrated, blood was taken and the concentrations of ciprofloxacin in serum were determined using HPLC with UV detector. The pharmacokinetic parameters such as $AUC_t,\;C_{max}\;and\;T_{max}$ were calculated. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two ciprofloxacin tablets based on the Ciprobay were -0.63%, 3.98% and -9.23%, respectively. There were no sequence effects between two tablets in these parameter. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log(0.8) to log(1.25)(e.g., log(0.9520)~log(1.0523) and log(0.9689)~log(1.1663) for $AUC_1\;and\;C_{max}$, respectively). Thus, Rofcin tablet was bioequivalent to Ciprobay tablet.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.291-304
• /
• 2022

Maximum shear modulus (G_max or G₀) is an important soil property useful for many engineering applications, such as the analysis of soil-structure interactions, soil stability, liquefaction evaluation, ground deformation and performance of seismic design. In the current study, bender element (BE) tests are used to evaluate the effect of the void ratio, effective confining pressure, grading characteristics (D₅₀, C_u and C_c), anisotropic consolidation and initial fabric anisotropy produced during specimen preparation on the G_max of sand-gravel mixtures. Based on the tests results, an empirical equation is proposed to predict G_max in granular soils, evaluated by the experimental data. The artificial neural network (ANN) and Adaptive Neuro Fuzzy Inference System (ANFIS) models were also applied. Coefficient of determination (R²) and Root Mean Square Error (RMSE) between predicted and measured values of G_max were calculated for the empirical equation, ANN and ANFIS. The results indicate that all methods accuracy is high; however, ANFIS achieves the highest accuracy amongst the presented methods.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.762-766
• /
• 1995

The coercive field $H_{c}$ of amorphous Y-Fe alloys in the spin-glass state has been investigated. Foramorphous $Y_{10}Fe_{90}$ alloy, the thermal variations of $H_{c}$ in the maximum external field $H_{max}=300,\;600$ and 1 k Oe exhibit a maximum. Since spin-glass behavior is strongly affected by external magnetic fields, the maximum point moves to lower temperature with increasing $H_{max}$. The appearance of the maximum in $H_{c}$ has been discussed in terms of the change of the spin-glass state in the external magnetic field. When the value of $H_{max}$ is 55 kOe, the temperature dependence of $H_{c}$ has no maximum and shows an exponential decrease with increasing temperature. Similar trends have been observed over a wide concentration range. The concentration dependence of $H_{c}$ is associated with the magnetic phase diagram.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.311-322
• /
• 2010

The purpose of this study was to evaluate the bond strengths between IPS e.max Press and four different types of resin cements that often used for esthetic restoration. Disc shaped IPS e.max Press blocks(N=40, diameter: 12mm, thickness: 3mm) were fabricated according to the manufacture's instruction and cleaned with ultrasonic cleaner. They were embedded into an autopolymerizing acrylic resin. Fourty cylinder shaped resin block(Filtek Z350, diameter: 4.5mm, thickness: 3mm) were fabricated using a plastic tube. Each specimens were randomly divided into 4 experimental group and bonded each other using 4 different resin cements(Variolink II(light-cure), Variolink II(dual-cure), Calibra, Super-Bond C&B) according to the manufactures' recommendations. All the specimens were stored in normal saline at $37^{\circ}C$ for 24 hours before test. Universal testing machine at a crosshead speed of 1mm/min was used to evaluate the shear bond strength. The data were statistically analyzed using one-way ANOVA(P<.01). Multiple comparison was done by the Tukey HSD test. The shear bond strength of Super-Bond C&B to e.max was significantly lower than those of Calibra, Variolink II(light-cure), Variolink II(dual-cure) (P<.01). The shear bond strength of Calibra, Variolink II(light-cure), Variolink II(dual-cure) to e.max were not significantly different. The shear bond strengths of light-cure/dual-cure cement were higher than that of self-cure cement.