• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.60-65
• /
• 2013

Now days, the demands of new type hull lines and optimum design in relation with the EEDI (Energy Efficiency Design Index) regulation and eco-friendly high efficiency vessel design are mandatory clauses in Euro financial crises era. Therefore, in correlation with the above, we tried to find the optimum results and revealed the alterations of supporting structure for liftable car deck latch on PCTC. Generally, PCTC (Pure Car & Truck Carrier) design has been performed by 2 pillar space model F. E analysis without vehicle loads on liftable car deck to evaluate the structural adaptability. So, we applied mentioned vehicle loads on pillar and side transverse web on model to compare with not applied model and performed the ultimate strength analysis of improved design for the safety evaluation.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3508-3517
• /
• 2013

지구(district)는 도시를 형성하는 기본 단위로 모든 도시활동이 시작되는 장소이다. 따라서 본 연구에서는 지구단위에서의 교통과 토지이용패턴의 결합 형태에 따른 270개의 시나리오를 가정하고 $CO_2$ 배출량을 분석한 후 $CO_2$ 배출량을 최소화하는 토지이용-교통모형을 작성하고자 하였다. 그 결과 균등 또는 외곽을 고밀도로 개발하는 토지이용패턴이 지구의 중간부나 1개 중앙존만을 개발하는 것보다 $CO_2$ 배출량 감소에 유리한 것으로 파악되었다. $CO_2$ 배출량 감소에 가장 영향을 많이 주는 것은 교통수요관리정책으로, 특히 개발밀도가 높은 상태일수록 $CO_2$를 감소시키기 위해서 교통수요관리는 필수적인 것으로 판단되었다. 고밀개발이 아닌 경우에 주어진 가상 네트워크에서는 2차로도로에 차량통행금지를 시키고 보행자도로로 전환시킬 경우 $CO_2$ 배출량을 감소시킬 수 있음을 알게 되었다. 한편, 제시된 토지이용-교통 회귀모델은 지구설계시 $CO_2$ 배출량을 줄이기 위한 최적대안 선정시 도움을 줄 수 있을 것으로 사료된다.

• 한국자동차공학회논문집
• /
• 제24권3호
• /
• pp.319-329
• /
• 2016

Globally, many researchers have been trying to improve the fuel economy of a vehicle for satisfying future $CO_2$ regulation and minimizing air pollution problem. For the same background, diesel engine and vehicle system optimization using simulation models have been key technologies for the improvement of vehicle system efficiency. Therefore, in this study, calibration method for the air breathing system of a WGT diesel engine using mean value model has been composed for efficient engine and vehicle optimization simulation researches. And virtual WGT performances have been calculated for a 2 cylinder downsized diesel engine system. From these researches, the calibration method for the boost pressure and EGR rate of a virtual diesel engine related with WGT performances could be composed and some of technical issue related with downsized diesel engine could be investigated.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.143-153
• /
• 1997

In this study, bending test was performed on the real-scale, built-up beam test model fabricated by the $CO_2$ arc spot welding to evaluate the applicability of the welding method to the production of the stiffened plate in car-carrying ship. The built-up beam models which were fixed at both ends in longitudinal direction or simply supported to the rigid foundation, depending on the restraint condition of the corresponding car decks considered, were subjected to simulated design vehicle loads or concentrated point loads. During the test, the central deflection and the longitudinal bending stresses were measured from several points on the longitudinal flange face to predict the section properties of the built-up beams. The longitudinal bending stress on each spot weld were also measured to calculate the average horizontal shear force subjected to spot welds. Test results revealed that the shear strength of spot welds with their current weld nugget size and welding pitch was adequate enough to withstand the horizontal shear forces under the design vehicle loads. Although the built-up beam fabricated by the arc spot welding was a discontinuous beam, its mechanical behavior was well explained by the continuous beam theory using the effective breadth of plate. Based on test results, the criterion for the size of spot weld of which the average shear stress might meet the allowable stress requirement of AWS Code could be established.

• 자원ㆍ환경경제연구
• /
• 제21권2호
• /
• pp.237-269
• /
• 2012

본 연구는 수송부문 $CO_2$ 배출량 저감을 목표로 하는 친환경자동차에 대한 지원정책의 효과를 예측하고 정책성공의 결정요인을 분석하는 것을 목적으로 한다. 자동차 이용에서 발생하는 $CO_2$ 배출량은 자동차의 유형을 선택하는 이산선택행위와 이미 선택한 유형의 자동차를 어느 정도나 운행하는지를 결정하는 연속선택행위에 의해서 영향을 받는다. 본 연구는 이산 및 연속 선택을 결합분석하는 이산 연속선택모형을 구축한 후, 한국 소비자들의 자동차 선택 및 운행거리 자료에 적용하여 자동차의 연료효율에 따라 보조금 부과금을 차등 적용하는 정책을 시행할 때 발생하는 두 가지 선택의 변화를 동시에 분석하였다. 분석 결과에 의하면 보조금 부과금이 도입되는 방식이나 상대적 크기에 따라 전기자동차나 하이브리드 자동차와 같은 새로운 유형의 친환경자동차의 예상보급률이 달라지며, $CO_2$ 배출량 저감 수준에 있어서도 상당한 차이를 나타내었다. 또한 보조금 부과금을 적절히 선택할 경우에만 정부의 세입중립성을 유지하면서도 정책효과를 거둘 수 있을 것이라는 분석 결과도 도출되었다. 따라서 연비에 따라 차등 적용되는 보조금 부과금 형태 정책의 성공 여부는 정책이 새로운 유형의 친환경자동차의 점유율에 실질적인 차이를 유발하도록 설계되었는지에 달려있다고 할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.347-349
• /
• 2009

Air quality of indoor space environment is affected by various pollutants like as particles and chemical stuffs. The indoor air pollution affects directly the human respiration organs to cause consequently unpleasant mental status. The $CO_2$ concentration level is one of the harmful components of air pollutants. Major factor to increase the $CO_2$ concentration level is the people's breath amount in indoor. The car exhaust gas diffused from the around road also has strong affect on $CO_2$ concentration. There are some other reasons to affect the $CO_2$ concentration change, such as, real-time change of the population movement, closeness to the indoor air flow inlet window and changes in road car traffic amount. A remote monitoring system to measure environmental indoor air pollution concerning on the $CO_2$ concentration was studied and installed realized set-up model. Zigbee network configuration was applied for this system and the $CO_2$ concentration data were collected through USN network. A software program was developed to assure systematic analysis and to display real-time data on web pages. For the experimental test various condition was set up, like as, window opening, stopping air condition operation and adjusting fan heater work, etc. The analysis result showed the relation of various environmental conditions to $CO_2$ concentration changes. The causes to increase $CO_2$ concentration were experimentally defined as windows closing, the stopping air condition system, fan heater operation. To keep the $CO_2$ concentration under the legally required ppm level in public access indoor space, the developed remote measurement system will be usefully applied.

• International Journal of Reliability and Applications
• /
• 제17권2호
• /
• pp.137-147
• /
• 2016

The engine mount of a car subjected to a pre-load related to the weight of the engine, and acts to insulate the vibration coming from the engine by moving on large or small displacement depending on the driving condition of the car. The vibration insulation of the engine mount is an effect obtained by dissipating the mechanical energy into heat by the viscosity characteristic of the rubber and the microscopic behavior of the additive carbon black. Therefore, dynamic stiffness from the intrinsic properties of rubber filled with carbon black at the design stage is an important design consideration. In this paper, we introduced a hyper-elastic, visco-elastic and elasto-plastic model to predict the dynamic characteristics of rubber, and developed a fitting program to determine the material model parameters using MATLAB. The dynamic characteristics analysis of the rubber insulator of the ACTIVE MOUNT was carried out by using MSC.MARC nonlinear structural analysis software, which provides the dynamic characteristics material model. The analysis results were compared with the dynamic characteristics test results of the rubber insulator, which is one of the active mount components, and the analysis results were confirmed to be valid.

• Wind and Structures
• /
• 제20권2호
• /
• pp.143-168
• /
• 2015

A numerical model for analyzing air-train-track interaction is proposed to investigate the dynamic behavior of a high-speed train running on a track in crosswinds. The model is composed of a train-track interaction model and a train-air interaction model. The train-track interaction model is built on the basis of the vehicle-track coupled dynamics theory. The train-air interaction model is developed based on the train aerodynamics, in which the Arbitrary Lagrangian-Eulerian (ALE) method is employed to deal with the dynamic boundary between the train and the air. Based on the air-train-track model, characteristics of flow structure around a high-speed train are described and the dynamic behavior of the high-speed train running on track in crosswinds is investigated. Results show that the dynamic indices of the head car are larger than those of other cars in crosswinds. From the viewpoint of dynamic safety evaluation, the running safety of the train in crosswinds is basically controlled by the head car. Compared with the generally used assessment indices of running safety such as the derailment coefficient and the wheel-load reduction ratio, the overturning coefficient will overestimate the running safety of a train on a track under crosswind condition. It is suggested to use the wheel-load reduction ratio and the lateral wheel-rail force as the dominant safety assessment indices when high-speed trains run in crosswinds.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.145-152
• /
• 2018

This study deals with the method of determining the tip-over stability of a truck mounted on a high place operation car that is frequently used to carry out high-altitude work. Multibody Dynamics Program and Zero Moment Point (ZMP) theory are used to include dynamic effects during the car's high place operation. Through a combination of the Multibody Dynamics Program and ZMP, understanding the dynamic effects of the car's operating parts and building a detailed tip-over model of the car permitted a more precise prediction of the car's tipping-over behavior. It is also expected to help reduce the car's development time due to the time-effective simulation and provide safer work levels for the operating guide (in terms of working radius and lifting capability) with the dynamics effects.

• 한국기후변화학회지
• /
• 제7권1호
• /
• pp.85-93
• /
• 2016

This study the efficiency of greenhouse gas reduction of 'low carbon car collaboration fund' and its alternative 'control of average fuel efficiency and greenhouse gas', and 'improving driving behavior' were analyzed by using LEAP, long term energy analysis model. Total 4 scenarios were set, baseline scenario, without energy-saving activity, 'low carbon car collaboration fund' scenario, 'fuel efficiency improving scenario', and 'improving driving behavior' scenario. The contents of analysis were forecast of energy demand by scenario and application as well as reduction of greenhouse gas emission volume, and the period taken for analysis was every 1 year during 2015~2030. Baseline scenario, greenhouse gas emission volume in 2015 would be 7,935,697 M/T and 13,081,986 M/T in 2030, increased 64.8%. The analysis result was average annual increase rate of 3.4%. The expected average annual increase rate of other scenarios was, 'low carbon car collaboration fund' scenario 1.7%, 'fuel efficiency improving' scenario 3.0%. and 'improving driving behavior' scenario 3.4%. and these were each 1.7%, 0.3%. 0.3% reduce from baseline scenario. The largest reduction was 'low carbon car collaboration fund' scenario, and there after were 'fuel efficiency improving scenario', and 'improving driving behavior' scenario.