• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.163-169
• /
• 2014

The effect of the combined argon (Ar) gas packaging treatment on the browning of fresh-cut potatoes was studied. Fresh-cut potatoes were prepared for the following six groups: dipping distilled water for 1 minute and air packaging (Cont); dipping in distilled water for 1 minute and argon gas packaging (AR); dipping in 1% ascorbic acid for 1 minute and air packaging (AA); dipping in 1% ascorbic acid for 1 minute and argon gas packaging (AAR); blanching at $35^{\circ}C$ for 30 minutes and air packaging (BL); and blanching at $35^{\circ}C$ for 30 minutes and argon gas packaging (BAR). The potatoes were washed, peeled, and sliced ($1.5{\times}1.5{\times}1.5$ cm) before treatment. The samples were packed with a 0.04-mm-thick OPP film and were stored at $5^{\circ}C$ for 9 days. During the storage, the $O_2$ concentration decreased in Cont but increased in the AR, AA, AAR, BL, and BAR groups. The $CO_2$ concentration increased during storage. The AR, AAR, and BAR groups showed high $L^*$ and low $a^*$, $b^*$ values (browning index). The growth of the total aerobic bacteria was also inhibited in the AR group. During storage, the PPO activity gradually increased, and the AR group showed lower PPO activity. The AA and AAR groups showed high DPPH radical scavenging activity. It was demonstrated that the argon gas packaging is effective in the quality maintenance of fresh-cut potatoes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1782-1789
• /
• 2016

This study evaluated the effect of vacuum and modified atmosphere (40% $CO_2+60%$ $N_2$, MA) packaging on the chemical composition, physicochemical properties and sensory attributes of chill-stored meat from 10 fallow deer (Dama dama) bucks at 17 to 18 months of age. The animals were hunter-harvested in the forests of north-eastern Poland. During carcass dressing (48 to 54 h post mortem), both musculus longissimus muscles were cut out. Each muscle was divided into seven sections which were allocated to three groups: 0, A, and B. Samples 0 were immediately subjected to laboratory analyses. Samples A were vacuum-packaged, and samples B were packaged in MA. Packaged samples were stored for 7, 14, and 21 days at $2^{\circ}C$. The results of the present study showed that the evaluated packaging systems had no significant effect on the quality of fallow deer meat during chilled storage. However, vacuum-packaged meat samples were characterised by greater drip loss. Vacuum and MA packaging contributed to preserving the desired physicochemical properties and sensory attributes of meat during 21 days of storage. Regardless of the packaging method used, undesirable changes in the colour, water-holding capacity and juiciness of meat, accompanied by tenderness improvement, were observed during chilled storage.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.251-258
• /
• 1997

The quality changes of strawberries packaged using low density polyethylene (LDPE) film filled with 3% silver-coated ceramic (WC30) and filled with it and 0.1% chitin (CWC) were investigated during storage at 2$0^{\circ}C$ for 5 days. In gas composition within film bag, CWC and WC30 kept higher CO2 concentration than LDPE without silver-coated ceramic and chitin (CO) did during 5 day storage. The weight loss of strawberries during storage was the smallest in WC30 and the largest in CWC in 5 days. Hardness of strawberries was the highest in WC30 and the lowest in CO during 5 day storage. pH of strwberries was increased a little until 1 day and was not changed after 1 day storage, and soluble solid content was not changed during storage. Vitamin C content was decreased significantly until 2 day storage and decreased a little after 2 days. There is no differences in the change of vitamin C content among the packaging materials. In color measurement, lightness was the highest in WC 30 and in sensory evaluation, all characteristics also had the highest scores in WC30. In conclusion, better quality of straberries was shown in WC30 than in CWC and CO during storage.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2018

In this study, pro-oxidant($d2w^{(R)}$) and rPP/ZnO nanocomposite flexible films for food packaging were prepared, and their mechanical and antimicrobial properties were investigated. As a result, the carbonyl index and hydroxyl index increased with exposured time to heat and UV rays. Surface analysis showed that the addition of zinc oxide improved the dispersibility and compatibility of the polymer, so that the surface of the composite film was smooth and the zinc oxide particles were smaller than the compared film. And it kept the physical properties by heat and UV ray blocking effect, and it worked to reduce decomposition. In the antimicrobial activity test, the microbial reduction rate was 3 logs or more at the use concentration of zinc oxide. The tensile strength was increased and the elongation was decreased. Oxidative degradability of multi-layered film in UV exposured for 72 hours, the molecular weight of the film decreased by 75.6%, 1,294 g/mol Mn and 5,920 g/mol Mw. In the safety analysis of food packaging materials, we obtained that are in standard of polypropylene, a food contact material of domestic law.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2017

Fe-9.8Si-6.0Al mother alloy was manufactured using by Fe-3.5Si recycled scrap and Si powder. And then, soft magnetic alloy powder of $D_{50}$ size and sphere type were prepared by gas atomization process. To obtain the soft magnetic powder of a high aspect ratio, in the first, we conducted the ball milling process for 8 hours. And heat treatment was performed under $650^{\circ}C$, 2 hours and $N_2$ atmosphere condition for reducing the residual stress of the powder. Based on these process, we made around $50{\mu}m$ diameter Fe-9.8Si-6.0Al powder, which morphology and shape was a similar to the commercial Fe-Si-Al powder. Finally, the soft magnetic sheets were prepared by tape casting process using by those powders. The permeability of the tape casting sheet was measured, and we confirmed the possibility of reusing to the soft magnetic materials of Fe-Si electric sheet scrap.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.3
• /
• pp.131-140
• /
• 2018

As global environmental problems become more serious, bio plastic suppliers in developed countries are expected to drive demand for eco friendly packaging materials due to recycling regulations and consumer's attention. To catch up with this demand, various types of bio plastics have been introduced using plants such as corn and domestic companies are increasingly interested in this. Industrial interest in bio plastics is increasing to solve the recent environmental problems. The critical disadvantages of the weak mechanical strength and expensive product cost were gradually solved by extensive researches. In order to promote the active use of bio plastics, countries around the world are operation certification marks and standard systems. In this article, we have summarized recent trends in domestic and overseas bio plastics regulations, certification marks and identification labels.

• Food Science and Preservation
• /
• v.2 no.2
• /
• pp.225-232
• /
• 1995

In order to study the effect of modified atmosphere packaging(M.A.P.) and controlled atmosphere(C. A.) storage on keeping freshness of mushrooms (Agricus-bisporus). Mushrooms was packaged with polyethylene(P.E.) film (40${\mu}{\textrm}{m}$, 60${\mu}{\textrm}{m}$, 80${\mu}{\textrm}{m}$) and C.A. conditions(CO2 concentration of 2%, O2 concentration of 2%) and storage at 0$\pm$1$^{\circ}C$, RH(relative hummidity) 92$\pm$1%. Gas composition in film was changed rapidly at early of storage, but it kept a constant level after 14 days of storage, and then kept at the level of 6~9% CO2 and 2~5% O2. Weight loss was 5% in non-packed mushrooms after 3 days of storage, but P.E. film, CO2 treated, C.A. conditions were 5% after 21 days of storage. Flesh firmness of the mushrooms was continuously decreased throughout storage period and the lowest of flesh firmness changed was 80${\mu}{\textrm}{m}$-P.E. film packing. Discoloration of the piteous of mushrooms appears to be the most Important factors to determine its marketability, L value of it appears to be of the high values at P.E. film packing and C.A. conditions during period. Large amount of ethanol and acetaldehyde were produced from the 7 days during storage, large contents of mannitol and trehalose were at the 14 days and 7 days during storage.

• Food Science and Industry
• /
• v.43 no.3
• /
• pp.22-31
• /
• 2010

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.93-100
• /
• 2008

The one and two pair of oxide modules for high temperature thermoelectric power generation were fabricated with $Ca_{2.7}Bi_{0.3}Co_4O_9$(p-type) and $Ca_{0.96}Bi_{0.04}Mn_{0.96}Nb_{0.04}O_3$(n-type) on $Al_2O_3$ substrate. For the optimizing of the design process, contact resistance was derived from the results of the one pair modules, and then the resistance of two pair modules were calculated to use the derived data. Those values were compared with the measured values for the optimizing of this design process. The resistance of calculated and measured two pairs modules was 0.956 $\Omega$ and 1.110 Q $\Omega$ $T_h$=833 K, respectively, the difference of resistance was about 0.15 $\Omega$. From the result, proposed design process is effective for high temperature thermoelectric oxide modules fabrication.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.3 s.32
• /
• pp.83-89
• /
• 2004

NTC thermistor embedded miniature thermoelectric module was fabricated for the precise temperature control of optical communication device such as laser diode (LD). The miniature thermoelectric module ($7.2 mm{\times}9 mm{\times}2.2 mm$) consists of 21 BiTe thermoelectric couples, the operating temperature is precisely controlled by embedded thermistor with quick response. The figure-of-merit (Z), maximum temperature difference (${\Delta}T_{max}$), maximum cooling capacity ($Q_{max}$) of the miniature thermoelectric module were $2.5{\times}10^{-3}$/K, 72 K, 2.2 W respectively and temperature could be controlled in range of ${\pm}0.1^{\circ}C$ accuracy in air. The fabricated miniature thermoelectric module is suitable for applications of the optical communication packaging.