• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.89-100
• /
• 2014

Energy consumption statistics in 2005 from the Korea Energy Management Corporation show that building energy usage was about 24.2% of total domestic energy consumption, and 64% of total building energy usage was consumed by residential buildings. Thus, about 10% of total domestic energy consumption is due to the heating of residential buildings. Building energy can be calculated by the configuration of the building envelope and the rate of infiltration (the volume of the infiltration of outdoor air and the leakage of indoor air), and by doing so, the annual energy usage for heating and cooling. Therefore, air-tightness is an important factor in building energy conservation. This investigate air infiltration and various factors that decrease it in timber frame buildings and suggest ways to improve air-tightness for several structural types. Timber frame buildings can be classified into light frame, post and beam, and log house. Post and beam includes Han-ok (a Korean traditional building). Six light frame buildings, three post and beam buildings, one Korean traditional Han-ok and a log house were selected as specimens. Blower door tests were performed following ASTM E779-03. The light frame buildings showed the highest air-tightness, followed by post and beam structures, and last, log houses.

• Journal of Gastric Cancer
• /
• 제10권4호
• /
• pp.241-246
• /
• 2010

Purpose: Laparoscopy-assisted gastrectomy (LAG) has become a technically feasible and safe procedure for early gastric cancer treatment. LAG is being increasingly performed in many centers; however, there have been few reports regarding LAG at low-volume centers. The aim of this study was to report our early experience with LAG in patients with gastric cancer at a low-volume center. Materials and Methods: The clinicopathologic data and surgical outcomes of 39 patients who underwent LAG for gastric cancer between April 2007 and March 2010 were retrospectively reviewed. Results: The mean age was 68.3 years. Thirty-one patients had medical co-morbidities. The mean patient ASA score was 2.0. Among the 39 patients, 4 patients underwent total gastrectomy and 35 patients underwent distal gastrectomy. The mean blood loss was 145.4 ml and the mean operative time was 259.4 minutes. The mean time-to-first flatus, first oral intake, and the postoperative hospital stay was 2.8, 3.1, and 9.3 days, respectively. The 30-day mortality rate was 0%. Postoperative complications developed in 9 patients, as follows: anastomotic leakage, 1; wound infection, 1; gastric stasis, 2; postoperative ileus, 1; pneumonia, 1; cerebral infarction, 1; chronic renal failure, 1; and postoperative psychosis, 1. Conclusions: LAG is technically feasible and can be performed safely at a low-volume center, but an experienced surgical team and careful patient selection are necessary. Furthermore, for early mastery of the learning curve for LAG, surgeons need education and training in addition to an accumulation of cases.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.380-387
• /
• 2015

A lead slowing-down spectrometer (LSDS) system is a promising nondestructive assay technique that enables a quantitative measurement of the isotopic contents of major fissile isotopes in spent nuclear fuel and its pyroprocessing counterparts, such as $^{235}U$, $^{239}Pu$, $^{241}Pu$, and, potentially, minor actinides. The LSDS system currently under development at the Korea Atomic Energy Research Institute (Daejeon, Korea) is planned to utilize a high-flux ($>10^{12}n/cm^2{\cdot}s$) neutron source comprised of a high-energy (30 MeV)/high-current (~2 A) electron beam and a heavy metal target, which results in a very intense and complex radiation field for the facility, thus demanding structural shielding to guarantee the safety. Optimization of the structural shielding design was conducted using MCNPX for neutron dose rate evaluation of several representative hypothetical designs. In order to satisfy the construction cost and neutron attenuation capability of the facility, while simultaneously achieving the aimed dose rate limit (< $0.06{\mu}Sv/h$), a few shielding materials [high-density polyethylene (HDPE)eBorax, $B_4C$, and $Li_2CO_3$] were considered for the main neutron absorber layer, which is encapsulated within the double-sided concrete wall. The MCNP simulation indicated that HDPE-Borax is the most efficient among the aforementioned candidate materials, and the combined thickness of the shielding layers should exceed 100 cm to satisfy the dose limit on the outside surface of the shielding wall of the facility when limiting the thickness of the HDPE-Borax intermediate layer to below 5 cm. However, the shielding wall must include the instrumentation and installation holes for the LSDS system. The radiation leakage through the holes was substantially mitigated by adopting a zigzag-shape with concrete covers on both sides. The suggested optimized design of the shielding structure satisfies the dose rate limit and can be used for the construction of a facility in the near future.

• Restorative Dentistry and Endodontics
• /
• 제22권2호
• /
• pp.680-692
• /
• 1997

New bonding agent systems have been supplied which operators can simply apply to conditioned tooth surfaces. The purpose of this study was to evaluate the shear bond strengths and the microleakages of three bonding agents and composite resins to dentin. Seventy-five extracted human maxillary and mandibular molar teeth were used in this study. For the shear bond strength test, the entire occlusal dentin surfaces of thirty teeth were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A). For the microleakage test, Class V cavities were prepared in the buccal surfaces of fourtyfive teeth. They were randomly assigned into 3 groups according to dentin bonding agents ($Scotchbond^{TM}$ Multi-Purpose plus, ONE-$STEP^{TM}$ and Prime & $Bond^{TM}$)and composite resins (Z-100, $Aelitefil^{TM}$ and TPH $Spectrum^{TM}$) to be used. Bonding agents and composite resins were bonded to exposed dentin surfaces of the tooth crown and to Class V cavities on the buccal surfaces respectively according to manufacturer's directions. The shear bond strengths were measured by universal testing machine($U^{TM}$ AGS-100, Japan). In addition, the degree of micro leakage at the occlusal and gingival margin was examined by 2 % methylene blue and stereomicroscope(Olymous SZH 10, Japan). The results were as follows: 1. The shear bond strength to dentin was the highest value in SBMP-Plus group($16.68{\pm}7.38$ MPa) and the lowest value in Prime & Bond group($11.61{\pm}5.82$ MPa), but there was no significant difference of shear bond strength among three groups. 2. The degree of microleakage at both occlusal and gingival margin was showed the lowest in SBMP-Plus group and the highest in ONE-STEP group. 3. At both occlusal and gingival margin, there was significant difference of microleakage between SBMP-Plus and ONE-STEP/ Prime & Bond groups(p<0.05), but no significant difference of microleakage between ONE-STEP and Prime & Bond group(p>0.05).

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.129-137
• /
• 2015

This study is in regard to the gas detection system and gas detection method utilizing smart phone. This study includes; 1) the sensor module attached to the smart phone to detect and measure flammable gas or toxic gas; and 2) gas detection APP which is installed inside the smart phone and recognizes the user information and location information automatically by reading RFID tag indicating the user or the location to detect gas through the contact area where RFID and blue tooth reader is installed inside of the above mentioned smart phone, and then measures the combustible gas or toxic gas by operating above mentioned sensor module and obtains the data thus measured, and above mentioned smart phone is characterized by its transmission of the above mentioned user information, location information and measured data which are obtained by above mentioned gas detecting APP to operation server via communication network. With this, reliability for the location detecting gas by the user, the result of the measurement, etc. can be secured. Furthermore, this provides the effect of preventing artificial manipulation at the time of input which is associated with the identification of the user to be measured by utilizing removable sensor module and application or the mistake resulted from wrong input by the user. In addition, by transmitting the measured data from the sensor module carrying out gas detection to operation server, this provides the effect of making it possible to process the data thus collected to a specialized data for combustible gas or toxic gas.

• 센서학회지
• /
• 제12권2호
• /
• pp.72-78
• /
• 2003

본 논문은 마이크로 플럭스게이트 자기 센서 (micro fluxgate magnetic sensor)의 여자코일 선폭에 따른 자계 검출 특성 변화에 관한 것이다. 센서 제작을 위해 PCB 다층 적층기술을 사용하였으며, 연자성 코어를 둘러싼 여자코일 선폭을 각각 $260\;{\mu}m$와 $520\;{\mu}m$로 센서를 구현하였다. 센서는 모두 5층의 기판을 적층 하였으며, 가운데 (3번째)기판을 자성체 코어로, 자성체 코어 외부 (2번째와 4번째)기판을 여자코일로, 최외부 (1번째와 5번째)기판을 검출코일로 제작하였다. 연자성 코어로는 약 100,000의 큰 DC 투자율 (permeability)을 갖는 코발트 (Co)가 주성분인 아몰퍼스 재료를 사용하였으며, 자속 누설을 최소화하기 위해 사각 링 형태를 유지하였다. 솔레노이드 형태의 여자코일과 검출코일은 구리 재질로 제작되었다. $260\;{\mu}m$ 여자코일 선폭을 갖는 자기센서는 여자조건이 360 kHz, $3\;V_{p_p}$의 정현파일 경우에 780 V/T로 매우 우수한 감도를 보이고 있으며, $-100\;{\mu}T\;{\sim}\;+100\;{\mu}T$ 영역에서 매우 우수한 선형특성을 보이고 있다. 자기 센서의 크기는 $7.3\;{\times}\;5.7\;mm^2$이며, 소비전력은 약 8 mW이다. 이런 초소형 자기센서는 휴대용 네비게이션 시스템, telematics, VR 게임기 등 다양한 응용분야에 적용할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.183-183
• /
• 2014

Recently, multiferroic materials gain much attention due to their fascinating fundamental physical properties. These materials offer wide range of potential applications such as data storage, spintronic devices and sensors, where both electronic and magnetic polarizations can be coupled. Among single-phase multiferroic materials, $BiFeO_3$ is typical because of the room-temperature magnetoelectric coupling in view of long-range magnetic- and ferroelectric-ordering temperatures. However, $BiFeO_3$ is well known to have large leakage current and small spontaneous polarization due to the existence of oxygen vacancies and other defects. Furthermore the magnetic moment of pure $BiFeO_3$ is very weak owing to its antiferromagnetic nature. Recently, various attempts have been performed to improve the multiferroic properties of $BiFeO_3$ through the co-doping at the A and the B sites, by making use of the fact that the intrinsic polarization and magnetization are associated with the lone pair of $Bi^{3+}$ ions at the A sites and the partially-filled 3d orbitals of $Fe^{3+}$ ions at the B sites, respectively. In this study, $BiFeO_3$, $Bi_{0.9}Ho_{0.1}FeO_3$, $BiFe_{0.97}Ni_{0.03}O_3$ and $Bi_{0.9}Ho_{0.1}Fe_{0.97}Ni_{0.03}O_3$ bulk compounds were prepared by solid-state reaction and rapid sintering. High-purity $Bi_2O_3$, $Ho_2O_3$, $Fe_2O_3$ and $NiO_2$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h to produce the samples. The samples were immediately put into an oven, which was heated up to $800^{\circ}C$ and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent and temperature-dependent magnetization measurements were performed with a vibrating-sample magnetometer and superconducting quantum-interference device.

• 한국가스학회지
• /
• 제19권4호
• /
• pp.29-34
• /
• 2015

화학물질을 다루는 실험실의 안전사고는 매년 끊이지 않고 있다. 특히 대학 내 실험실은 학생들이 주된 연구자로써 지식과 능력을 쌓아가고 경험을 축적하는 곳이기에 실험실의 안전은 더욱 중요하다. 학 내 실험실에서 주로 사용하는 5가지의 가스(CO, $NH_3$, $H_2$, $CH_4$, $N_2$)를 선정하여 이 가스들이 누출 될 경우의 시나리오들로부터 확산 과정을 PHAST v.6.7로 계산, 분석함으로써 피해 정도를 예측하였다. 실험실 내부 확산과정은 Computational Fluid Dynamics(CFD) 프로그램 FLUENT를 통하여 모델링하였다. 가스 누출 시 실험실 창을 통해 외부로 유출 될 경우 실내와 실외의 피해 영향에 대해서도 비교하였다. 각 가스들의 모델링 결과를 보면, 실험실 외부보다는 실험실 내부에서 그 피해 정도가 훨씬 큰 데, 학 내 실험실에서 일반적으로 사용하는 가스 용기, 즉 실린더의 용량은 47 L(혹은 그 이하)로 ton 단위로 사용하는 사업장에 비하면 그 양이 현저히 적기 때문에 실외의 영향이 플랜트와 비교해서 현저히 작다. 하지만 시뮬레이션 결과 작은 양으로도 실내에서는 큰 피해가 발생할 수 있음을 보여준다.

• 대한환경공학회지
• /
• 제28권5호
• /
• pp.463-471
• /
• 2006

본 연구에서는 충남 천안시와 강원도 원주시에 위치한 불량매립지 일대에 대해 지구물리 탐사 중 전기비저항 탐사를 실시하였으며, 수집된 자료를 이용하여 2차원과 3차원 비저항 역산 모델링을 수행하여 매립지 주변 지질구조와 침출수 오염영역, 침출수 유동을 평가하였다. 천안 직산매립지는 매립지가 논 상부에 위치하고 있으며 매립지로부터 침출수로 인한 농지 오염의 가능성이 있어 물리탐사 측선 배열을 매립지를 기준으로 서로 교차하는 측선배열을 수행하였다. 원주 매립지의 경우 매립지와 주변 논밭의 경계가 매립지 옹벽으로 나뉘며, 매립지 경계로부터 침출수 침전시설이 위치하고 있으나 현재는 방치된 상태로 침출수 누출로 인한 농지 오염의 가능성이 있다. 이에 총 4개 측선에 대해 3개 측선은 매립지 경계로부터 일정거리를 두고 평행하게 배열을 하였으며, 나머지 한 개 측선은 이 3개 측선을 교차하도록 배열하였다. 2차원 비저항 역산모델을 수행한 결과 천안매립지의 경우 침출수가 외부 논으로 확대되지 않고 매립지 내부에 정체된 형태로 존재하는 것으로 평가되었다. 이는 지하수 관측정 정기 수질분석시 측정된 지하수의 전기전도도 값의 분포에서도 확인할 수 있다. 원주 매립지의 경우는 매립지로부터 유래된 침출수가 매립지 경계 부근 폐기된 침출수 처리시설 밑으로 흐르는 것으로 평가되었고, 매립지 주변 기존 저수지였던 곳에서는 매립지 주변에 위치한 계곡의 영향으로 계곡에서 흘러드는 지하수에 의한 흐름과 과거 저수지의 영향으로 지표 근처에서 낮은 비저항대를 형성하는 것을 확인할 수 있었다. 또한 저수지 제방에서는 하부 $7{\sim}8m$ 심도에서 지하수가 논으로 유입되는 것으로 추정되었다. 이하의 반응온도 기준으로 약 $10{\sim}80%$ 이상이었다. 따라서, CVOCs 제거반응을 위하여 널리 사용되고 있는 단일 $CrO_x/Al_2O_3$ 촉매보다는 $CrO_x$의 사용량을 최소화하면서도 우수한 반응활성을 얻을 수 있는 $CrO_x/TiO_2$-based복합 산화물 촉매가 보다 바람직하며 하나의 대안적인 촉매 디자인 방법으로 응용될 수 있을 것으로 생각된다.EX>을 효과적으로 처리할 수 있었다.문에, 이 연구에서 개발된 수치모델은 퇴적물에서 일어나는 미량 오염 물질의 거동을 파악하기 위해 유용하게 사용되어질 수 있을 것으로 사료된다.

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.535-542
• /
• 2015

원자로 격납건물은 냉각재상실사고와 같이 내부의 과도한 압력이 유발되는 사고에 있어서도 방사성 물질이 외부로 누출되지 않도록 막는 최종의 방벽이다. 이러한 격납건물의 기능적 중요성에 기인하여, 건설 초기 구조건전성시험(SIT)을 수행한다. 이러한 SIT거동을 가장 실제와 가깝게 예측하기 위한 해석 연구를 수행하였다. 해당 연구의 결과는 2편의 논문으로 정리되었는데, 본 논문은 그 중 II편으로 I편의 해석모델 구성 시의 주요 고려사항의 분석 및 예비해석 결과를 반영한 상세 해석 모델의 구성 과정 및 해석 결과를 제시하고 있다. 특히 비부착식 텐던으로 시공된 구조물에서 덕트관에 의한 강성 저감효과 및 덕트관을 사이에 둔 텐던과 콘크리트간의 밀착 여부에 따른 영향을 해석 시 최대한 고려하고자 하였다. 이러한 과정을 통해 구축된 해석 모델에 따른 변위과 신고리 3호기 SIT 측정변위를 비교한 결과, ASME CC-6000 기준을 충분히 만족시키는 결과가 나타남을 확인하였다.