• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.212-217
• /
• 2016

Influence of poly(ethylene-co-vinyl acetate) (EVA) types and cure systems on cure characteristics of foaming EVA compounds were investigated. Three kind EVAs with different VA contents were employed. Influence of triallyl cyanurate (TAC) and dicumylperoxide (DCP) content on the cure characteristics were examined. The minimum torque ($T_{min}$) and delta torque (${\Delta}T$) decreased as the VA content increased. The ${\Delta}T$ was increased by adding TAC and by increasing the DCP content. For the foaming EVA compounds without TAC, the cure times such as the minimum cure time ($t_{min}$), scorch time ($t_2$), and optimal cure time ($t_{90}$) did not show a specific trend according to the DCP contents. For the foaming EVA compounds containing TAC, the cure times decreased as the DCP content increased. From the experimental results, it was found that efficienct DCP/TAC ratio for improvement of the crosslink density was 1.1~2.0.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.101-109
• /
• 2013

Recently, it is certain that the increase of heating and cooling energy consumption by radical change in climate condition has caused serious problems related to environmental and energy concerns associated with increase of fossil fuel usage and carbon dioxide production as well as global warming. So, various actions to reduce greenhouse gas exhaustion and energy consumption have been prepared by world developed countries. Our government has also been trying to seek energy control methods for houses and buildings by proclaiming political polices on low-carbon green growth and construction and performance standards for environment-friendly housing. The energy consumption by buildings approximately reaches 25% of total korea energy consumption, and the increasing rate of energy consumption by buildings is stiffer than the rate by the other industries. The greatest part in the buildings of the energy consumption is building facade. While lots of research projects for reducing energy consumption of the facade have been conducted, but a few research projects on concrete comprising more than 70% of outsider of buildings has been tried. This research presents here a study to improve the insulation property of structural concrete formed by micro form admixture (MFA) with experimentally reviewing the physical, mechanical and thermal characteristics of the concrete. As the results of this experiment, in the case of concrete mixed with MFA, slump loss has been improved. As the mixing ratio of MFA increases, the compressive strength is decreased and thermal conductivity is increased. Also it was found that water-cement ratio increases, the compressive strength is decreased and thermal conductivity is increased. but, there was not big influence by the change of fine aggregate ratio.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.125-130
• /
• 2006

To understand the effect of midsole on the bending stiffness of footwear, bending moment is studied with various hardness and thickness of polyurethane(PU) and poly(ethyl one-co-vinylacetate)(EVA) foams which composed in footwear midsole. The initial bending moment of footwear was appeared at $19^{\circ}$ on bending angle of footwear, and this bending angle was not depend on thickness and hardness of midsole. The bending moments of footwear were also increased with increase of the hardness and thickness of misole which were composed in footwear. Increased hardness and increased thickness of foam and midsole also cause a greater bending moment of the sports shoe, respectively.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.203-214
• /
• 2014

We measured the contact dermatitis-causing substances concentrations in 28 commercial oxidative hair-coloring products. This study was aimed to provide the fundamental data about oxidative hair-coloring products. We selected 10 oxidation dyes (p-phenylenediamine, toluene-2,5-diamine, m-phenylenediamine, nitro-p-phenylenediamine, p-aminophenol, m-aminophenol, o-aminophenol, p-methylaminophenol, N,N'-bis(2-hydroxyethyl)-p-phenylenediamine sulfate, 2-methyl-5-hydroxyethylaminophenol) and 4 heavy metal (nikel; Ni, chromium; Cr, cobalt; Co, copper; Cu) as contact dermatitis-causing substances. To identify 10 oxidation dyes, hexane-2% sodium sulfite was used for the rapid and simple extraction and ultra performance liquid chromatography (UPLC) analysis was used for simultaneous analysis in 12 minutes. 10 oxidative dyes were detected as indicated on the product packaging and each concentration was lower than prescribed upper concentration limit by pharmaceutical manufacturing standards. And we analysed inductively coupled plasma-optical emission spectrophotometer (ICP-OES) for content search of heavy metal after microwave digestion. The heavy metal average concentration in oxidative hair-coloring products was 0.572 ${\mu}g/g$ for Ni, 3.161 ${\mu}g/g$ for Cr, 2.029 ${\mu}g/g$ for Co, 0.420 ${\mu}g/g$ for Cu, respectively. The average of concentration in powder type (henna) was higher than those of other foam and cream type oxidative hair-coloring products as follows; 1.800 ${\mu}g/g$ for Ni, 10.127 ${\mu}g/g$ for Cr, 7.082 ${\mu}g/g$ for Co, 1.451 ${\mu}g/g$ for Cu. Hair coloring products were classified into the six colors - black, dark brown, brown, dark brown, light brown, red brown and analyzed. Brown color had the highest average concentration of Co and the others had the highest average concentration of Cr.

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.6-12
• /
• 1988

To improve the individual packaging method and extend the shelf life of mackerel (Scomber japonicus), salted and unsalted mackerel fillets were packaged in laminated plastic film bag (Nylon/PE: $20{\mu}m/40{\mu}m,\;12{\times}15$ cm) filled with $CO_2$ gas, in vacuum, and stored at O and/or $5^{\circ}C$. The other samples were packaged in plastic foam trays, overwrapped with oxygen permeable film (control), and stored at same temperature. Volatile basic nitrogen (VBN), trimethylamine (TMA), histamine (HM) and viable cell counts (VCC) were progressed with the increasing of storage time, but thiobarbituric acid (TBA) values decreased gradually after reaching at a maximum peak in 5-9 days. Judging from 4 chemical components, VBN was the most available component in quality judgement of mackerel fillets and its upper limiting content was 25 mg%. Regression equation for shelf life prediction of mackerel fillets with sensory evaluation and VBN component was determined.

• Resources Recycling
• /
• v.7 no.3
• /
• pp.3-10
• /
• 1998

Simulated waste liquid containing 50 ppm cobalt ion was treated by adsorbing colloidal flotation using Fe(III) or Al(IlI) as flocclant and a sodium lamyl sulfate as a collector. Parameters such as pH, surfactant concentration, Fe(III) or Al(III) concentration, gas flow rate, etc., W앙e considered. The flotation with Fe(III) showed 99.8% removal efficiency of cohalt on the conditions of initial cobalt ion concentration 50 ppm, pH 9.5, gas flow rate 70 ml/min, and flotation time 30 min. When the waste solution, was treated with 35% $H_2O_2$ prior to adsorbing colloidal flotation, the optimal pH for removing cobalt shifted m to weak alkaline range and flotation could be applied in wider range of pH as compared to non-use of $H_2O_2$. Additional use of 20 ppm Al(III) after precipitation of 50 ppm Co(II) with 50 ppm Fe(III) made the optimal pH range for preferable flotation w wider. Foreign ions such as, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $Ca^{2+}$ were adopted and their effects were observed. Of which sulfate ion was f found to be detrimental to removal of cob퍼t ion by flotation. Coprecipitation of Co ion with Fe(III) and Al(III) resulted in b better removal efficiency of cobalt IOn 피 the presence of sulfate ion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.286-304
• /
• 2017

In this study, we proposed a new-type of circular perforated caisson breakwater consisting of a bundle of latticed blocks that can be applied to a small port such as a fishing port, and numerically investigated the hydraulic characteristics of the breakwater. The numerical method used in this study is OLAFOAM which newly added wave generation module, porous media analysis module and reflected wave control module based on OpenFOAM that is open source CFD software published under the GPL license. To investigate the applicability of OLAFOAM, the variations of wave pressure acting on the three-dimensional slit caisson were compared to the previous experimental results under the regular wave conditions, and then the performance for irregular waves was examined from the reproducibility of the target irregular waves and frequency spectrum analysis. As a result, a series of numerical simulations for the new-type of circular perforated caisson breakwaters, which is similar to slit caisson breakwater, was carried out under the irregular wave actions. The hydraulic characteristics of the breakwater such as wave overtopping, reflection, and wave pressure distribution were carefully investigated respect to the significant wave height and period, the wave chamber width, and the interconnectivity between them. The numerical results revealed that the wave pressure acting on the new-type of circular perforated caisson breakwaters was considerably smaller than the result of the impermeable vertical wall computed by the Goda equation. Also, the reflection of the new-type caisson breakwater was similar to the variation range of the reflection coefficient of the existing slit caisson breakwater.

• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.244-249
• /
• 1982

In order to reduce malic acid in low-alcohol content appel wine $(6{\sim}9%)$ malate-decomposing yeast, Schzosaccharomyces japonicus var. japonicus St-3 was used. Fallen apples before the harvesting season were collected and extraction was made. The apple extract was fortified with sucrose to make final sugar concentration of 18% in case of 9% base wine. High acid content in the primarily fermented apple wine could be reduced by following with malo-alcoholic fermentation using Schizosaccharomyces japonicus var. japonicus St-3 in second half of alcoholic fermentation using Saccharomyces sp. R-11. Secondary fermentation was proceeded at low temperature $(7{\sim}8^{\circ}C)$ for 130 days using Saccharomyces sp. R-11. Prior to the secondary fermentation, two percent of sugar was added to the base wine in order to produce carbon dioxide gas. And each five percent of specially prepared malt extract and hop extract were added to the base wine in order to increase foam stability. Better shelf-life was observed by keeping high carbon dioxide pressure$(2.3{\sim}2.5kg/cm^2)$ in the bottle. It was assured that the better low-alcohol content apple wine could be brewed by the method which we used above.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.3
• /
• pp.219-230
• /
• 2004

Most of the low-level liquid radioactive wastes generated from PWR plants are classified into high or low total suspended solid(HTDS or LTDS), and into radiochemical and radioactive laundry waste. Although the evaporation process has a high decontami- nation ability, it has several problems such as corrosion, foam, and congestion. A new liquid waste disposal process using the ion-exchange demineralizer(IED), instead of the current evaporation process, has been introduced into the Yonggwang NPP #5 and 6. These two methods have been compared to understand the differences in this study. Aspects compared here were the released radioactivity amount of the liquid radioactive wastes, the dose of off-site residents, the decontamination factor, and the amount of the solid radioactive wastes. The IED system is designed to discharge higher radioactivity about 20% than the evaporating system, and the actual radioactivity released from the evaporating and IED system were 0.473mCi and 1.098mCi, respectively. The radioactivity released from the IED was 2.32 times higher than that of the evaporating system. The dose of off-site residents was $2.97{\times}10^{-6}$mSv for the evaporating system, and $6.47{\times}10^{-6}$mSv for IED. The decontamination factor(DF) of the evaporator is, in most cases, far lower than the lower limits of detection(LLD) with the Ge-Li detector. Due to the low concentration of the liquid wastes collected from the liquid waste system, the decontamination factor of IED is very low. Since there is not enough data on the amount of solid radioactive wastes generated by the evaporation system, the comparison on these two systems has been conducted on the basis of the design, and the comparison result was that the evaporating system generated more wastes about 40% than IED.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.537-546
• /
• 2017

This study aims to develop the floating debris detection algorithm using a Unmanned Aerial Vehicle (UAV) and multispectral sensors. In addition, the occurrence range of floating debris was estimated by applying the algorithm. An aerial photograph using an unmanned aerial vehicle was used to generate an orthoimage that can calculate the area. A spectrum survey of water, plants litter, polystyrene foam etc. was conducted. After obtaining spectroscopic characteristics of floating debris and water, the River Floating Debris (RFD) index was calculated. And we detected the floating debris through band combination of sensor using RFD. As a result of the RFD application, accumulation zone of floating debris was confirmed at three sites in the orthoimage. It was estimated that a lot of floating debris was accumulated at 0.82 ha ($8,200m^2$), which is corresponding to 3.6% including the accumulation zone.