• 한국표면공학회지
• /
• 제51권1호
• /
• pp.47-53
• /
• 2018

Sn-based lithium-ion batteries have low cost and high theoretical specific capacity. However, one of major problem is the capacity fading caused by volume expansion during lithiation/delithiation. In this study, 3-dimensional foam structure of Cu-Sn alloy is prepared by co-electrodeposition including large free space to accommodate the volume expansion of Sn. The Cu-Sn foam structure exhibits highly porous and numerous small grains. The result of EDX mapping and XPS spectrum analysis confirm that Cu-Sn foam consists of $SnO_2$ with a small quantity of CuO. The Cu-Sn foam structure electrode shows high reversible redox peaks in cyclic voltammograms. The galvanostatic cell cycling performances show that Cu-Sn foam electrode has high specific capacity of 687 mAh/g at a current rate of 50 mA/g. Through SEM observation after the charge/discharge processes, the morphology of Cu-Sn foam structure is mostly maintained despite large volume expansion during the repeated lithiation/delithiation reactions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권1호
• /
• pp.14-18
• /
• 2014

The mechanical, electrical and thermal characteristics of insulating materials may significantly affect the performance and reliability of electrical devices using superconductors. General method to provide insulating layer between coated conductors is wrapping coated conductor with Kapton tape. But uniform and compact wrapping without failure or delamination in whole coverage for long length conductor is not a simple task and need careful control. Coating of insulating layer directly on coated conductor is desirable for providing compact insulating layer rather than wrapping insulating layers around conductor. Ceramic added polymer has been widely used as an insulating material for electric machine because of its good electrical insulating properties as well as excellent heat resistance and fairy good mechanical properties. The insulating layer of coated conductor should have high breakdown voltage and possesses suitable mechanical strength and maintain adhesiveness at the cryogenic temperature where it is used and withstand stress from thermal cycling. The insulating and mechanical properties of polymer can be improved by adding functional filler. In this study, insulating layer has been made by adding ceramic particles such as $SiO_2$ to a polymer resin. The size, amount and morphology of added ceramic powder was controlled and their effect on dielectric property of the final composite was measured and discussed for optimum composite fabrication.

• 과학교육연구지
• /
• 제35권2호
• /
• pp.204-220
• /
• 2011

이 연구는 초기 광합성 연구자의 탐구 과정을 재구성하여 중학생들의 과학탐구능력과 광합성 관련 개념의 향상을 위한 실험 모듈을 개발한 후, 이의 적용 효과를 알아보고 광합성과 관련된 학생들의 선행 개념 유형과 개념 변화의 패턴을 분석하고자 하였다. 실험재료로는 Rapid-cycling Brassica rapa 라는 속성식물을 사용하였다. 개발된 모듈을 적용한 실험반의 수업은 교과서에 제시된 실험을 적용한 통제반의 수업에 비해 학생들의 과학탐구능력 향상에 효과적이었으며, 과학탐구능력의 하위 요소 중에서 측정, 예상, 가설 설정 능력의 향상에 효과적이었다. 실험반의 사전-사후 검사 결과를 비교해 본 결과, 관찰, 예상, 일반화 능력의 향상에 더욱 효과가 있는 것으로 나타났다. 개발된 모듈은 광합성 관련 개념 성취 및 생태계내에서의 식물의 역할, 식물의 먹이, 식물체 내에서 물과 양분의 이동과 관련된 개념 발달에 효과가 있었다. 학생들은 선행 개념으로 이산화탄소나 산소와 같이 눈에 보이지 않는 물질의 존재나 역할 또는 에너지의 축적과 같은 추상적 개념에 대한 이해가 부족한 것으로 나타났으나, 이 연구에서 개발된 모듈을 적용한 결과 유기물과 산소 생산자인 식물의 역할에 대한 포괄적인 개념 발달에 효과가 있었으며, 과학탐구능력과 광합성 관련 개념의 향상에 효과가 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권9호
• /
• pp.1260-1266
• /
• 2001

The effect of protein supplementation, $O_2$ concentration and co-culture on the development of embryos produced by nuclear transfer using cultured cumulus cell was investigated. Recipient oocytes and cumulus cells were obtained from the ovaries of the slaughtered Hanwoo cows. Donor cumulus cells were cultured in Dulbecco's modified Eagle medium containing 10% fetal bovine serum at 5% $CO_2$ in air at $38.5^{\circ}C$. The 1 to 6 passages of cumulus cells were isolated and used as donor cells. The in vitro matured oocytes were enucleated and then the isolated donor cells were introduced. One $15{\mu}s$ pulse of 180 volts was applied to induce the fusion between karyoplast and cytoplast. The fused embryos were activated with $10{\mu}M$ calcium ionophore for 5 min and 2 mM 6-dimethylaminopurine for 3 h. To examine the effect of protein supplementation, nuclear transfer (NT) embryos were cultured in one of the following 4 treatments : 1) CR1aa + 3 mg/ml BSA for 7 days ; 2) CR1aa + 10% FBS for 7 days ; 3) CR1aa + 1.5 mg/ml BSA + 5% FBS for 7 days ; and 4) CR1aa + 3 mg/ml BSA for first 3 days and then CR1aa + 1.5 mg/ml BSA + 5% FBS for 4 days. Culture took place at 5% $CO_2$, 5% $O_2$ and 90% $N_2$ at $38.5^{\circ}C$. Although there were no significant differences in cleavage rate among different protein supplements, the rates of blastocyst formation were significantly different. When NT embryos were cultured in the medium supplemented with only BSA, they could develop to only morula not to blastocyst. However, when FBS was supplemented, NT embryos developed to blastocyst stage. In order to investigate the effect of $O_2$ concentration and co-culture, NT embryos were cultured in CR1aa + 1.5 mg/ml BSA + 5% FBS with or without cumulus cell co-culture at an atmosphere of 5% $CO_2$ in air (20% $O_2$) or 5% $CO_2$, 5% $O_2$, 90% $N_2$ (5% $O_2$) at $38.5^{\circ}C$ for 7 days. The percentage of blastocyst development was significantly higher when the NT embryos were cultured at an atmosphere of 5% $O_2$ than that of 20% $O_2$ (p<0.05). However, there was no significant difference between with and without cumulus cell co-culture at an atmosphere of 5% $O_2$ or 20% $O_2$. Fifty embryos were transferred to 25 recipients and 5 recipients were pregnant at 100 days. From 5 pregnant cows, only one cow was delivered of female twin. In conclusion, the embryos reconstructed by enucleation of metaphase II oocytes and introduction of the cycling and quiescent cumulus donor cells in Hanwoo had developmental potential to term after embryo transfer to recipient cows.

• The Korean Journal of Ecology
• /
• 제27권3호
• /
• pp.155-159
• /
• 2004

In order to gain a better understanding of how forests participate in the cycling of carbon, effects of nitrogen addition on soil respiration were investigated on the oak forest in Kongju, Korea. Study site was divided into control, treatment f and treatment 2 plots, with 5 replication in each plot. In each replicate of treatment 1 and treatment 2 were fertilized with ammonium nitrate (NH$_4$NO$_3$), 30 g/$m^2$ and 60 g/$m^2$, respectively. Soil respiration, soil temperature, ammonium-N and nitrate-N were measured during the experimental period. Ammonium-N and nitrate-N in Ta were higher than those in control and T$_1$. Ammonium-N and nitrate-N in top-soil and sub-soil decreased sharply in August after bi9 rainfall in July in T$_1$ and T$_2$, however, those in control plot increased. Soil respiration in T$_2$ Plot showed consistently higher than those in control and T$_1$ until the end of July. However, soil respiration was similar among the control, T$_1$ and T$_2$ in mid-August and September The amount of Co$_2$ released from soil respiration in control, T$_1$ and T$_2$ in mid-August was 8.0$\pm$0.4, 9.3$\pm$0.6 and 10.2$\pm$0.5 $\mu$mol$^{-1}$ ㆍm$^{-2}$ ㆍs$^{-1}$ , respectively. However, those in control, T$_1$ and T$_2$in mid-August was 13.0$\pm$0.4, 13.5$\pm$0.5, 13.3$\pm$0.6 $\mu$mol$^{-1}$ ㆍm$^{-2}$ ㆍ$^{-1}$ , respectively. The results suggest that nitrogen addition in this oak forest has a positive effect on soil respiration.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.65-68
• /
• 2012

Novel type $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ powders were prepared by a solid-state reaction of $Li_2CO_3$, $V_2O_3$, $WO_2$ and $MoO_2$ precursors in a nitrogen atmosphere containing 10 mol % hydrogen gas, and assessed as anode materials in lithium-ion batteries. The specific charge and discharge capacities of the $Li_{1.1}V_{0.9-2x}W_xMo_xO_2$ anodes were higher than those of the bare $Li_{1.1}V_{0.9}O_2$ anode. The cyclic efficiency of these anodes was approximately 73.3% at the first cycle, regardless of the presence of W and Mo doping. The composite anode, which was composed of $Li_{1.1}V_{0.75}W_{0.075}Mo_{0.075}O_2$ (20 wt %) and natural graphite (80 wt %), demonstrated reasonable specific capacity, high cyclic efficiency, and good cycling performance, even at high rates without capacity fading.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.302-303
• /
• 2010

Generally, the high energy lithium ion batteries depend intimately on the high capacity of electrode materials. For anode materials, the capacity of commercial graphite is unlike to increase much further due to its lower theoretical capacity of 372 mAhg-1. To improve upon graphite-based negative electrode materials for Li-ion rechargeable batteries, alternative anode materials with higher capacity are needed. Therefore, some metal anodes with high theoretic capacity, such as Si, Sn, Ge, Al, and Sb have been studied extensively. This work focuses on ternary Si-M1-M2 composite system, where M1 is Ge that alloys with Li, which has good cyclability and high specific capacity and M2 is Mo that does not alloy with Li. The Si shows the highest gravimetric capacity (up to 4000mAhg-1 for Li21Si5). Although Si is the most promising of the next generation anodes, it undergoes a large volume change during lithium insertion and extraction. It results in pulverization of the Si and loss of electrical contact between the Si and the current collector during the lithiation and delithiation. Thus, its capacity fades rapidly during cycling. Si thin film is more resistant to fracture than bulk Si because the film is firmly attached to the substrate. Thus, Si film could achieve good cycleability as well as high capacity. To improve the cycle performance of Si, Suzuki et al. prepared two components active (Si)-active(Sn, like Ge) elements film by vacuum deposition, where Sn particles dispersed homogeneously in the Si matrix. This film showed excellent rate capability than pure Si thin film. In this work, second element, Ge shows also high capacity (about 2500mAhg-1 for Li21Ge5) and has good cyclability although it undergoes a large volume change likewise Si. But only Ge does not use the anode due to its costs. Therefore, the electrode should be consisted of moderately Ge contents. Third element, Mo is an element that does not alloys with Li such as Co, Cr, Fe, Mn, Ni, V, Zr. In our previous research work, we have fabricated Si-Mo (active-inactive elements) composite negative electrodes by using RF/DC magnetron sputtering method. The electrodes showed excellent cycle characteristics. The Mo-silicide (inert matrix) dispersed homogeneously in the Si matrix and prevents the active material from aggregating. However, the thicker film than $3\;{\mu}m$ with high Mo contents showed poor cycling performance, which was attributed to the internal stress related to thickness. In order to deal with the large volume expansion of Si anode, great efforts were paid on material design. One of the effective ways is to find suitably three-elements (Si-Ge-Mo) contents. In this study, the Si based composites of 45~65 Si at.% and 23~43 Ge at.%, and 12~32 Mo at.% are evaluated the electrochemical characteristics and cycle performances as an anode. Results from six different compositions of Si-Ge-Mo are presented compared to only the Si and Ge negative electrodes.

• 생명과학회지
• /
• 제20권9호
• /
• pp.1353-1357
• /
• 2010

공주 근교의 일본잎갈나무 조림지에서 벌목이 이루어지지 않은 비벌목지를 대조구, 벌목이 이루어진 벌목지를 처리구로 설정하여 토양호흡과 호흡에 영향을 주는 토양온도, 토양수분을 2008년 5월부터 12월까지 2주 간격으로 측정하였다. 조사기간 동안 대조구와 처리구의 평균 토양온도는 각각 $23.3{\pm}0.5^{\circ}C$, $25.9{\pm}3.1^{\circ}C$으로 처리구에서 높았으며, 토양수분은 각각 $27.76{\pm}7.12%$, $24.55{\pm}5.12%$으로 처리구에서 낮게 나타났다. 토양호흡량은 봄부터 하절기로 이행함에 따라 증가한 후 동절기에 이르기까지 감소하는 경향을 보였으며, 토양호흡과 토양온도와는 높은 상관관계($R^2$=0.8747)가 있었으나, 토양수분과는 유의성이 높지 않았다($R^2$=0.4437). 토양호흡량은 대조구와 처리구에서 모두 8월에 가장 높았으며, 이때 대조구와 처리구의 평균 토양호흡량은 각각 $0.82{\pm}0.13$, $1.32{\pm}0.10$ $CO_2g{\cdot}m^{-2}{\cdot}hr^{-1}$으로 나타났다. 대조구와 처리구에서 5월부터 12월까지 측정된 전체 호흡량은 각각 2,419.2, 3,610.8 $CO_2g{\cdot}m^{-2}$으로 대조구에 비해 처리구에서 49.3% 높은 것으로 나타났다. 본 연구의 결과 인위적인 삼림의 벌목은 토양 호흡량을 증가시켜 대기 중의 이산화탄소를 증가시킬 것으로 판단된다.

• 한국수소및신에너지학회논문집
• /
• 제20권6호
• /
• pp.505-511
• /
• 2009

The hydriding and electrochemical characteristics of Zr-based $AB_2$ alloy produced by gas atomization have been extensively examined. For the particle morphology of the as-cast and gas-atomized powders, it can be seen that the mechanically crushed powders are irregular, while the atomized powder particles are spherical. The increase of jet pressure of gas atomization process results in the decrease of hydrogen storage capacity and the slope of plateau pressure significantly increases. TEM and EDS studies showed the increase of jet pressure in the atomization process accelerated the phase separation within grain of the gas-atomized alloy, which brought about a poor hydrogenation property. However, the gas-atomized $AB_2$ alloy powders produced by jet pressure of 50 bar kept up the reversible $H_2$ storage capacity and discharge capacity similar to the mechanically crushed particles. In addition, the electrode of gas-atomized Zr-based $AB_2$ alloy of 50 bar showed improved cyclic stability over that of the cast and crushed particulate, which is attributed to the restriction of crack propagation by grain boundary and dislocation with ch/discharging cycling.

• 한국산림과학회지
• /
• 제97권2호
• /
• pp.165-170
• /
• 2008

Litterfall has been recognized an important part of the forest ecosystem production, playing a major pathway in energy flow and nutrient cycling through the ecosystem. This study was carried out to examine the quantity and components, temporal variation, and spatial heterogeneity of the litterfall in the mixed broadleaved-Korean pine forest. The data were collected from the 9ha permanent experimental plot, of which on the center area, i.e. $150m{\times}150m$, the total number of 319 circular litterfall traps with the size of $0.5m^2$ were established to collect falling litterfall. The results showed that the annual amount of litterfall was totalized 3,033.7 kg/ha, occupying broad-leaves of 39.3%, conifer-leaves of 29.5%, others of 18.5%, branches of 10.4%, and seeds of 2.3%. The peak point of the litterfall production was made at the end of September, proportionating 32.2% of total amount. The analysis of semivariogram revealed the existence of high spatial heterogeneity, calculated the scale of spatial heterogeneity ranged from 11.6 m to 29.1 m. The result of proportion (C/[Co+C]) showed that spatial heterogeneity of autocorrelation in total spatial heterogeneity were from 97.0% to 100%. The relatively heavy branches and others had significant differences in litterfall production between the areas of canopy gap and closed canopy in the 95% probability level, but the other components did not show statistical differences.