• 멤브레인
• /
• 제22권1호
• /
• pp.46-53
• /
• 2012

본 연구에서는 석탄 화력발전소의 연소 후 $CO_2$ 회수 기술인 알칸올 아민 수용액을 이용한 아민흡수법에서 전체 운전비의 80% 가량을 차지하는 탈거에너지의 저감을 위해 새로운 탈거기술인 분리막을 이용한 감압탈거 기술을 제시하고자 한다. 막의 소재로는 소수성막인 PE (polyethylene)를 지지체로 하고 $5{\mu}m$ 두께의 PDMS (polydimethylsiloxane)를 코팅한 복합막을 제조하여 적용하였으며, 흡수액으로 MEA (monoethanolamine) 30 wt% 수용액을 사용하였다. 온도의 변화에 따른 영향을 알아보기 위하여 흡수액 온도를 $25{\sim}80^{\circ}C$로 변화시켜 이산화탄소의 탈거특성을 살펴보았으며, 흡수용액의 $CO_2$ 함량($CO_2$ loading)에 따른 영향을 고찰하기 위하여 $CO_2$ 함량을 변화시켰다. 또한 감압탈거 시 탈거측 압력을 60~360 mmHg(abs.)로 변화시켜 진공도에 따른 탈거특성을 연구하였다. 아민수용액의 온도가 증가할수록, 이산화탄소 부하량이 증가할수록 이산화탄소의 탈거량은 증가하는 경향을 보이고 있으며, 감압이 감소함에 따라 이산화탄소의 탈거량 역시 증가하고 있는 것을 확인하였다. 막의 안정성 실험 결과 PTFE 단일막에 비하여 PDMS-PE 복합막의 경우 감압탈거 막공정에 적용하기 안정한 막이라고 판단된다.

• 공업화학
• /
• 제18권3호
• /
• pp.239-244
• /
• 2007

이산화탄소 분리 및 메탄 회수를 동시에 수행하기 위한 배출구가 두 개로 분리된 내부순환식 기포탑 반응기를 이용하여 $CO_2$ 분리용 흡수제인 모노에탄올아민(MEA)의 최적조건을 도출하였다. 5 wt% MEA 수용액에서 이산화탄소의 흡수 및 탈기 반응 시 pH 변화, 공기주입량에 따른 이산화탄소 탈기량 및 메탄 함량변화를 관찰하였다. 또한 액상수위 및 초기 MEA 흡수액 온도변화에 따른 이산화탄소 흡수 및 메탄 회수율을 측정하였다. 최적반응조건은 정상상태에서 액상수위 40 mm, 공기주입량은 1.5 L/min, 흡수액의 온도 $25^{\circ}C$이었다

• 청정기술
• /
• 제15권2호
• /
• pp.69-74
• /
• 2009

초임계이산화탄소와 공용매의 혼합물을 사용하여 반도체 웨이퍼 기판으로부터 고농도이온주입 포토레지스트(HDIPR)를 제거하였다. 또한 고압 셀 내부에 초음파 장치를 부착하여 웨이퍼 표면에 물리적 힘을 제공함으로서 세정용액의 HDIPR에 대한 스트리핑 성능을 현저히 향상시키고, 제거 시간을 단축시켰다. 공용매의 종류 및 농도, 공정 온도, 압력 변화에 따른 HDIPR 스트리핑 특성을 조사하였으며, 웨이퍼 표면의 제거 전후의 상태 및 성분을 scanning electron microscopy 과 energy dispersive X-ray spectrometer를 이용하여 분석하였다. 10 w/w% 함량의 아세톤 공용매를 이용하여 공정압력 27.6 MPa과 온도 343 K 의 조건에서 3분의 초음파 처리시간을 거쳐 HDIPR을 완전히 제거할 수 있었다.

• Membrane and Water Treatment
• /
• 제10권2호
• /
• pp.127-137
• /
• 2019

The D2EHPA/TBP co-extractants immobilized PolyHIPE membrane can be used for the selective separation of Mn (II) from Co (II). By solvent-nonsolvent method, D2EHPA/TBP co-extractants can be effectively immobilized into PolyHIPE membrane. The pore structure of PolyHIPE membrane and the presence of TBP enhance the stability of immobilized co-extractants. The optimal operating conditions for the separation of Mn (II) and Co (II) are feeding phase at pH 5.5, sulfuric acid concentration in the stripping phase of about 50 g/L and stirring speed at 400 rpm. The D2EHPA/TBP co-extractants ratio of 5:1 shows synergetic effect on Mn/Co separation factor about 22.74. The removal rate and recovery rate of Mn (II) is about 98.4 and 97.1%, respectively, while for Co (II) the transport efficiency is insignificant. The kinetic study of Mn (II) transport shows that high initial flux, $J_f^o=80.1({\mu}mol/m^2s)$, and maxima stripping flux, $J_s^{max}=20.8({\mu}mol/m^2s)$, can be achieved with D2EHPA/TBP co-extractants immobilized PolyHIPE membrane. The stability and reusability study shows that the membrane can maintain a long term performance with high efficiency. High purity of Co (II) and Mn (II) can be recovered from the feeding phase and stripping phase, respectively.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.22-28
• /
• 2017

The result of stripping process for the removal of the post etch/ash Photoresist (PR) residue on an aluminum patterned wafer by using supercritical $CO_2$ ($sc-CO_2$) mixture, was investigated by scanning of electron microscope (SEM) inspection of wafer, measuring the cloud points and visual observation of the state of $sc-CO_2$ mixtures. It was found that $sc-CO_2$ mixtures were made by mixing additives and $sc-CO_2$ should form homogeneous and transparent phase (HTP) in order to effectively and uniformly remove the post etch/ash PR residue on the aluminum patterned wafer using them. The additives were formulated by mixing and co-solvents like an amine compound and fluorosurfactants used as HTP agents, and the PR residue on the wafer were able to be rapidly and effectively removed using the $sc-CO_2$ mixture of HTP. The five kinds of additives were formulated by the recipe of mixing co-solvents and surfactants, which were able to remove PR residue on the wafer by mixing with $sc-CO_2$ at the stripping temperature range from 40 to $80^{\circ}C$. The five kinds of $sc-CO_2$ mixtures which were named as PR removers were made, which were able to form HTP within the above described stripping temperature. The cloud points of $sc-CO_2$ mixtures were measured to find correlation between them and HTP.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.123-131
• /
• 1992

This study was done to evaluate the changes of enamel surface by interproximal stripping and recovery of it by polishing. The number of 34 1st premolars which had extracted for orthodontic treatment were selected as samples. Interproximal stripping was performed by hand with metal strip and strip placer (Dentaurum Co., Germany) and low speed handpiece with diamond disk (Superdiaflex, Germany). Polishing was performed by hand with plastic strip (3M Col) and low speed handpiece with whip-mix, DCPA (Dicalcium Phosphate, Anhydrous, $CaHPO_4$) powder and Sof-lex (3M Co. U.S.A.) polishing kit. Each groups were examined under the scanning electron microscope (JEOL Co., JSM-840A, Japan) and the following results were obtained: 1. The stripped group performed by metal strip and diamond disk altogether showed deep furrow on the enamel surface as wide as about $10{{\mu}m}$. 2. There could be seen more irregular scratched line in the group stripped by metal strip than that by diamond disk. 3. The polished group performed by plastic strip and DCPA powder showed slight smoothening of the edge of stripped furrow on the enamel surface without relation to the stripping method. 4. The polished group performed by Sof-lex progressive polishing kit could not avoid the formation of the furrows on the enamel surface according to the particle size without relation to the stripping method. 5. The polished group performed by the superfine polishing wheel, the final stage of Sof-lex polishing method showed shallow scratched line as wide as within about $2{{\mu}m}$ on the enamel surface without relation to the stripping method. 6. The interproximal stripped enamel surface could not recover its original surface texture by any kind of polishing methods.

• 방사성폐기물학회지
• /
• 제4권4호
• /
• pp.311-320
• /
• 2006

[ $^{14}C$ ] 핵종이 함유된 IRN-150 혼상 폐수지로부터 $H^{14}CO_3$ 이온의 제거 및 제거된 $^{14}C$ 핵종의 $^{14}CO_2$ 기체로의 전환 특성을 고찰하였다. 비방사성 $HCO_3$ 이온이 흡착되어 있는 IRN-150 혼합수지로부터 $HCO_3$ 이온의 탈착용액내로의 분리 및 $CO_2$ 기체로의 전환 특성을 용액의 농도 변화에 따라 평가하였으며, 탈착용액으로는 $NaNO_3,\;Na_3PO_4,\;NH_4H_2PO_4,\;H_3PO_4$를 사용하였고, 비교 평가를 위하여 NaOH, $HNO_3$, HCl를 이용한 $CO_2$기체로의 전환 특성을 분석하였다. 아울러 월성 원자력발전소에 저장중인 실제 폐수지를 이용하여 $NH_4H_2PO_4,\;H_3PO_4$ 탈착용액을 이용한 폐수지내 $^{14}C$ 핵종의 $^{14}CO_2$ 기체화 특성을 평가하였고, 탈착후 잔류용액내 존재하는 $^{137}Cs,\;^{60}Co$ 감마핵종을 분석하였다.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.847-856
• /
• 2014

Spent resin waste containing a high concentration of $^{14}C$ radionuclide cannot be disposed of directly. A fundamental study on selective $^{14}C$ stripping, especially from the IRN-150 mixed bed resin, was carried out. In single ion-exchange equilibrium isotherm experiments, the ion adsorption capacity of the fresh resin for non-radioactive $HCO_3{^-}$ ion, as the chemical form of $^{14}C$, was evaluated as 11mg-C/g-resin. Adsorption affinity of anions to the resin was derived in order of $NO_3{^-}$ > $HCO_3{^-}{\geq}H_2PO_4{^-}$. Thus the competitive adsorption affinity of $NO_3{^-}$ ion in binary systems appeared far higher than that of $HCO_3{^-}$ or $H_2PO_4{^-}$, and the selective desorption of $HCO_3{^-}$ from the resin was very effective. On one hand, the affinity of $Co^{2+}$ and $Cs^+$ for the resin remained relatively higher than that of other cations in the same stripping solution. Desorption of $Cs^+$ was minimized when the summation of the metal ions in the spent resin and the other cations in solution was near saturation and the pH value was maintained above 4.5. Among the various solutions tested, from the view-point of the simple second waste process, $NH_4H_2PO_4$ solution was preferable for the stripping of $^{14}C$ from the spent resin.

• 한국환경보건학회지
• /
• 제27권1호
• /
• pp.93-99
• /
• 2001

This study aims at finding out pertinent reaction conditions for treating high concentration ammonia contained in N-chemical factory wastewater with decompressed ammonia stripping method that was designed. And it also tries to investigate adsorption capability of removed ammonia to soil. The results from experiments are as follows ; 1. The removal rate of N $H_3$-N of synthetic wastewater was under 85% at pH 10 with decompressed ammonia stripping method. The reaction time in pressure 360 mmHg at pH 11 and 12 was shorter than in 460 mmHg, and the removal rate of N $H_3$-N with decompressed ammonia stripping method at 9$0^{\circ}C$ was 11~15% higher than air stripping 2. The optimum conditions for decompressed ammonia stripping with synthetic sample were shown as pH 12, temperature 9$0^{\circ}C$, internal reaction pressure 460 mmHg and reaction time 50 minutes. These conditions were applied to treat the wastewater containing organic-N 290.5mg/$\ell$, N $H_3$-N 168.9mg/$\ell$, N $O_2$-N 23.2mg/$\ell$, N $O_3$-N 252.4mg/$\ell$, T-N 735mg/$\ell$. Organic-N turned out to be removed 60%, the removal rate of N $H_3$-N IS 94%, T-N is 50%. But N $O_2$-N and N $O_3$-N were increased with 7.8% and 14.9% respectively. 3. The CO $D_{Sr}$ removal rate in decompressed ammonia stripping reaction was 42% and S $O_4$$^{2-}$ was removed 8.2%. It was turned out caused with higher pH and thermolysis. 4. In soil adsorption of ammonia desorbed from the decompressed stripping process of wastewater, the recovery rate was 76% in wet soil.

• 천문학회보
• /
• 제40권1호
• /
• pp.77.2-77.2
• /
• 2015

Galaxies are known to evolve passively in the cluster environment. Indeed, much evidence for HI stripping has been found in cluster galaxies to date, which is likely to be connected to their low star formation rate. What is still puzzling however, is that the molecular gas, which is believed to be more directly related to star formation, shows no significant difference in its fraction between the cluster population and the field galaxies. Therefore, HI stripping alone does not seem to be enough to fully understand how galaxies become passive in galaxy clusters. Intriguingly, our recent high resolution CO study of a subsample of Virgo spirals which are undergoing strong ICM pressure has revealed a highly disturbed molecular gas morphology and kinematics. The morphological and kinematical peculiarities in their CO data have many properties in common with those of HI gas in the sample, indicating that strong ICM pressure in fact can have impacts on dense gas deep inside of a galaxy. This implies that it is the molecular gas conditions rather than the molecular gas stripping which is more responsible for quenching of star formation in cluster galaxies. In this study, using multi transitions of 12CO and 13CO, we investigate the density and temperature distributions of CO gas of a Virgo spiral galaxy, NGC 4402 to probe the physical and chemical properties of molecular gas and their relations to star formation activities.