• Clean Technology
• /
• v.27 no.3
• /
• pp.255-260
• /
• 2021

A drawback in the CO₂ capture process using an aqueous amine solution is the high energy requirement for the regeneration process. In order to overcome this disadvantage, this study investigated CO₂ capture characteristics using a biphasic absorbent in which isopropanol (IPA) was introduced into an aqueous solution of diethylenetriamine (DETA). When the IPA composition exceeded 20 wt% in 20 wt% DETA aqueous solution, the absorbent phase was liquid-liquid separated into a CO₂-rich phase and a CO₂-lean phase because of the low solubility of the salt formed by the reaction of CO₂ with DETA in isopropanol. When the isopropanol composition in the DETA aqueous solution increased, the phase volume ratio of the CO₂-rich phase to the volume of the CO₂-lean phase increased; and, accordingly, the CO₂ in the CO₂-rich phase was more concentrated. The results of absorbing CO₂ in a packed tower using 20 wt% DETA + IPA + water absorbent confirmed that both the CO₂ absorption capacity and the absorption rate were higher than that of the 20 wt% DETA aqueous solution. When a biphasic absorbent composed of DETA + IPA + water is applied to CO₂ capture, it can be expected to concentrate CO₂ because of phase separation and thereby reduce regeneration energy owing to volume reduction of the CO₂-rich phase.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.314-316
• /
• 2011

지구온난화에 가장 큰 원인인 이산화탄소를 제거하기 위한 많은 공정들이 연구 개발되고 있다. 이러한 공정 중 아민과 암모니아로 대표되는 흡수공정이 가장 빠르게 상용화 될 것으로 예측되고 있다. 그러나 이러한 공정은 흡수제 손실, 열화, 높은 재생에너지 등 여러 문제점으로 인하여 많은 장치비와 높은 운영비가 소요되므로 경제적인 새로운 공정 개발이 필요하다. 현재 연구되는 있는 혁신적인 많은 이산화탄소 포집 기술 중 효소를 이용한 생물학적 공정이 기술개발에 많은 기간을 필요로 하나 기술이 개발될 경우 가장 비용효과적인 기술로 인식되고 있다. 본 논문에서는 효소를 이용한 이산화탄소 포집기술 개발의 장단점에 대하여 기술하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.173-182
• /
• 2020

In this study, amino acid salt absorbents were applied to remove and capture high concentrations of CO₂ in liquor factories and regeneration performance was confirmed. In order to evaluate the effective treatment of the desorption process, two methods(Hot plate and Steam) were compared at the laboratory scale. As a result, hot plate and Steam. Hot plate methods regeneration efficiency was about 10% and Steam methods was about 60%. The Steam-Tower condition was evaluated by installing a 100㎥/min flow rate scrubber absorption system in the liquor factory. As a result, it was established that the absorbent flow rate was below 4L/min and the steam temperature was above 160℃. Finally regeneration performance was confirmed as 85.5%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6439-6444
• /
• 2015

With increasing concern about global warming, CCS (Carbon dioxide capture and storage) has attracted much attention as a promising technology for reducing $CO_2$ emission. It is necessary to develop the cost-effective absorbents materials in order to rapid commercialize CCS technologies. In this work, he study for the promotion of absorption rate in $CO_2$ capture system using metal nanoparticle were investigated. Three kinds of metal nanoparticle, cobalt, zinc, and nickel, were prepared by wet and dry method and effect of preparation method on the absorption rate of $CO_2$ were compared. Among the tested using pH method, nickel nanoparticle prepared by wet method showed the most significant improvement of $CO_2$ absorption rate. In case that metal nanoparticle is applied to CCS process, it is expected to be more efficient in $CO_2$ capture process due to reduce the size of absorption tower.

• Plant Journal
• /
• v.8 no.4
• /
• pp.40-44
• /
• 2012

The pre-treatment of natural gas to remove $H_2S$ and $CO_2$ before liquefaction in natural gas processing is required, and amine-based absorption processes are widely used in gas processing. The current study aims to model amine-based absorption process and to find cost-effective design through systematic analysis of energy systems, together with column design. Different design options for absorber and stripper are investigated in a holistic manner, and heat integration technique has been applied to investigate how design of columns is interacted with energy efficiency for the pre-treatment process considered. Case study has been presented to demonstrate the applicability of heat integration method for improving energy efficiency in practice.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.947-953
• /
• 2017

In this study, the regeneration efficiency of the amino acid salt absorbent which can be applied to carbon dioxide absorption / regeneration process was confirmed. The regeneration efficiency has a great influence on the economical judgment of the process. so, continuous regeneration experiment was conducted to establish economical process. The amino acid salts used in the experiments are Potassium L-lysinate and Potassium L-alaninate. Each amino acid and potassium hydroxide(KOH) were mixed at a 1: 2 molar ratio. In order to confirm the regeneration efficiency of the absorbent, carbon dioxide was absorbed in the two materials, and the carbon dioxide desorption experiment was carried out by heating. The initial reaction rate was L-alanine was faster. Over time, L-lysine, desorption higher concentrations of carbon dioxide. L-lysine showed higher regeneration efficiency than L-alanine, (L-alanine 47.26% and L-lysine 62.11%). As a result of the continuous regeneration experiment using the L-lysine having good absorption and regeneration efficiency, it was confirmed that the regeneration efficiency decreases as the number of regeneration increases.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.795-800
• /
• 2009

In this study, the $CO_2$ removal characteristics of the Vortex tube type absorbtion apparatus were investigated to enhance the compactness of $CO_2$ absorption process and to reduce the amount of absorbing solution of the $CO_2$ separation process. The Vortex tube with the diameter of 17 mm and the length of 250mm was introduced in the experimental apparatus to treat $20Nm^3/hr$ of $CO_2$ containing flue gas. The flue gases for experiments containing 11~13 vol% of $CO_2$ were supplied from the coal-firing CFBC power plant with 12 ton/hr of steam producing capacity. The mixed solutions of 20 wt% of MEA as base solution with the adding solutions like HMDA, AMP and KOH were used as absorbents. The experiments were executed under the various conditions like the absorbing solution concentrations in the range of 20 to 50 wt%, the flow rate of $CO_2$ containing flue gases in the range of 6 to $15Nm^3/hr$ and the flow rate of absorbing solution in the range of 1.0 to 3.0 l/min. As a results, the $CO_2$ removal efficiency of mixed absorbent of 20 wt% of MEA with HMDA was remarkable. From this study, we concluded that the efficient separation of $CO_2$ from flue gases using the features of the Vortex tube type absorbing unit for gas/liquid contact and the separation of gas/liquid be possible. But more works are needed to increase the $CO_2$ removal efficiency of Vortex tube process.

• Applied Chemistry for Engineering
• /
• v.22 no.5
• /
• pp.526-531
• /
• 2011

The present study attempted to impregnate alkali metals to amino acid in order to improve $CO_2$ absorption capacity. A used amino acid was glycine, of which pH increased up to about 11 with the addition of alkalies. $CO_2$ absorption capacity of amino acid salts was evaluated in a batch and a continuous process. The absorption capacity appeared in turns as; Sodium Glycinate ${\geq}$ Lithium Glycinate > Potassium Glycinate. Amino acid salts showed lower absolute capacity of $CO_2$ absorption than primary amine (Monoethanolamine) at $20^{\circ}C$. In a continuous absorption with 10% $CO_2$ flow, the increasing the reaction temperature, the increasing rate of absorption for amino and was higher that of than amino absorbent.

• Journal of the KSME
• /
• v.53 no.6
• /
• pp.46-50
• /
• 2013

유동층기술은 물리반응 공정, 화학반응 공정, 에너지 변환공정 등 다양한 산업 분야에 오랫동안 적용되어 왔다. 이 글에서는 여러 산업분야 중 최근 환경 분야에 적용된 유동층 반응기 설계기술, 특히 건식흡수제를 이용한 다단 $CO_2$ 포집공정용 유동층 반응기 설계를 위한 유동층 열교환기 설계 기술에 대해 소개 하고자 한다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.11a
• /
• pp.95-100
• /
• 2004