• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.114-119
• /
• 1998

등방성 피치계 탄소섬유를 Co$_{2}$gas중에서 등온산화시켜 활성탄소섬유를 제조하였다. 산화된 섬유의 비표면적은 BET장치를 이용하여 측정하였다. Burn-off가 증가하여도 반응속도는 크게 감소하지 않았으며, 80$0^{\circ}C$와 90$0^{\circ}C$에서 산화된 섬유의 비표면적은 40%-60%의 burn-off에서 급격히 증가하다가 60%이상에서 감소하였다. 110$0^{\circ}C$에서 산화된 시편은 40%이상 burn-off되어도 비표면적은 크게 증가하지 않고 60%를 지나서도 계속해서 표면적이 증가하는 현상을 나타내었다. 100$0^{\circ}C$에서 60.4%의 burn-off가 일어난 산화섬유의 비표면적은 3,614$m^2$/g로 가장 큰 값이 얻어졌다. 등방성 탄소섬유는 미세한 흑연결정립들이 무질서한 배향을 하고 있으며, 미세기공벽으로 작용할 수 있는 결정립층이 많기 때문에 활성탄소섬유 제조를 위한 원료로 적합하다고 판단된다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2003.05a
• /
• pp.679-684
• /
• 2003

급속한 경제성장과 산업발달로 인해 국내외 에너지 소비량은 매년 크게 증가하고 있으며 이에 따라 화석연료의 사용도 증가하는 추세이다. 연소반응을 통한 화석연료의 사용은 GHG 중 가장 큰 요인인 $CO_2$를 배출한다. 따라서 막대한 양으로 배출되고 있는 $CO_2$ 발생을 억제하기 위하여 다양한 이산화탄소 고정화 기술이 연구 중에 있다. 그 중에서 경제성이 있고, 환경친화적이며 대량의 $CO_2$를 안정적이고 영구적으로 처리할 수 있는 기술로 주목되고 있는 연구가 광물질을 이용한 $CO_2$ 미네랄 Carbonation 처리기술에 대하여 반응특성을 고찰하였다. 대상 광물질로 Ca 보다 $CO_2$ 처리 시 친화적인 것으로 알려진 Mg가 많이 함유된 Silicate 계열의 사문석(Serpentine[Mg$_3$Si$_2$O$_{5}$(OH)$_4$])을 대상으로 Carbonation 반응특성을 실험을 통하여 고찰하였다. 실험은 TGA를 이용한 분석실험과 200cc 급 Autoclave를 이용한 $CO_2$의 직접주입실험을 수행하였다. TGA분석과 200cc 급 Autoclave를 이용한 실험을 통해서 Serpentine 의 경우 실험에서 정한 운전조건에서 $CO_2$와의 Carbonation 반응에 적합한 물질로 판단된다는 결론을 도출하였다.

• Korean Journal of Ecology and Environment
• /
• v.46 no.2
• /
• pp.234-240
• /
• 2013

Increasing global $CO_2$ concentration and temperature is leading to the phenomenon of global warming and impacting the growth of plants. In order to determine the effects of global warming on the woody plants of Korea, five woody species, Pinus densiflora (Korea's dominant species), Ginkgo biloba (a commonly used street tree), Quercus glauca (dominant species in sub-tropical forests), Quercus gilva and Abeliophylum distichum (both endangered species), were grown at control (ambient $CO_2$+ambient temperature) and treatment (elevated $CO_2$+elevated temperature) conditions in a glasshouse, and were monitored for their ecological response. Shoot lengths and number of leaves were measured once a month from April to October in 2010, and were again measured in November 2011. Shoot lengths of P. densiflora, G. biloba and Q. glauca were not significantly affected by elevated $CO_2$ and temperature conditions. However. those of Q. gilva and A. distichum were both higher for plants grown under treatment than for those grown under control. The number of leaves of five woody species was not significantly affected by elevated $CO_2$ and temperature. These results indicate that P. densiflora, G. biloba and Q. glauca react more favorably than Q. gilva and A. distichum (each of which are designated as endangered plants) under global warming situations.

• Journal of Radiation Protection and Research
• /
• v.20 no.4
• /
• pp.265-274
• /
• 1995

Diffusivity of ions of radioactive species is an important factor for designing radwaste repositories. Clay minerals are used as a backfill material. In this study, diffusion of Co-60 ions through the bentonite having various densities has been studied, using a diffusion cell. The measured diffusivities of Co-60 ions decreased as the density of bentonite increased. The diffusivity of Co-60 ion decreased from $8.79{\times}10^{11}m^2/s$ to $6.82{\times}10-13m^2/s$ as the clay dry bulk density increased from 0.41 to 2.03g/cm3. The diffusivity of Co ion was larger than that of Sr ion at low density, but the diffusivity of Co ion decreased rapidly as the density of clay increased and became smaller than that of Cs ion at high density. This phenomenon is thought to be caused by the rapid decrease of the fraction of mobile cation since the chemical combination of Co ions with oxygen or oxide on clay surface and the entrance of Co ions into the crystal structure of clay increase as the clay density increases. This change should be considered especially in designing the clay back fill for low and intermediate radwaste disposal facilities.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.36-43
• /
• 2013

In order to asses gas production behavior for $CO_2$ ECBM, the sorption charcteristics on coal are considered to be a key factor. In this study, we have investigated the change of the sorption rate of adsorbed gas as a function of pressure and temperature below the appropriate depth for $CO_2$-ECBM. The experiment were carried out under four different temperatures varying from $15^{\circ}C$ to $45^{\circ}C$, while the coal pressure was varied from atmosphere to 1,400 psi for every temperature. From this results, the sorption rate both $CO_2$ and $CH_4$ increased with increasing the coal pressure. Otherwise, the sorption rate both $CH_4$ and $CO_2$ decreased linearly as the coal temperature increased. From the sensitivity studies on pressure and temperature change, it was experimentally identified that $CO_2$ sequestration rate and $CH_4$ production rate are better at deeper depths below a depth of 800 m in coal seams. However, the results showed continued decline in the increasing ratio of ECBM with formation depth.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.56-60
• /
• 1993

We have investigated the dependence of the magnetization, anisotropy, coercivity, and Kerr rotation on the Fe concentration in FeCo/Pd multilayer thin films, where the Fe concentration in the FeCo sublayer varied between 0 and 100% with maintaining the same sublayer thickness of $2.5\;{\AA}$ FeCo and $10.5\;{\AA}$A Pd. The maximum saturation magnetization was observed at the Fe concentration of about 48at.% in the FeCo sublayer. Perpendicular magnetic anisotropy and coercivity of the FeCo/Pd multilayer thin film decreased monotonically with increasing the Fe con-centration. The Kerr rotation angle also decreased with increasing the Fe concentration and the amount of vari-ation was remarkably changed with decreasing the light wavelength.

• Journal of the Korean Electrochemical Society
• /
• v.23 no.2
• /
• pp.47-55
• /
• 2020

Highly loaded LiCoO₂ positive electrodes are prepared to construct high-energy density lithium-ion batteries, their electrochemical performances are evaluated. For the standard electrode, a loading of about 2.2 mAh/㎠ is used, and for a high-loading electrode, an electrode is manufactured with a loading level of about 4.4 mAh/㎠. The content of carbon black as electronic conducting additive, and the porosity of the electrode are configured differently to compare the effects of electron conduction and ionic conduction in the highly loaded LiCoO₂ electrode. It is expected that the electrochemical performance is improved as the amount of the carbon black increases, but the specific capacity of the LiCoO₂ electrode containing 7.5 weight% carbon black is rather reduced. When the conductive material is excessively provided, an increase of electrode thickness by the low content of the LiCoO₂ active material in the same loading level of the electrode is predicted as a cause of polarization growth. When the electrode porosity increases, the path of ionic transport can be extended, but the electron conduction within the electrode is disadvantageous because the contact between the active material and the carbon black particles decreases. As the electrode porosity is lowered through the sufficient calendaring of the electrode, the electrochemical performance is improved because of the better contact between particles in the electrode and the reduced electrode thickness. In the electrode design for the high-loading, it is very important to construct the path of electron conduction as well as the ion transfer and to reduce the electrode thickness.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.558-566
• /
• 2003

We fabricated thick film monopole antennas using Li-doped BiNbO$_4$ ceramics and investigated their electrical properties as a function of the Li-doping concentration. Compared with undoped BiNbO$_4$ ceramics, addition of Li$_2$CO$_3$ improved dielectric constant by increasing of ionic polarization, but reduced quality value by increasing of lattice distortion. Antenna properties like gain, bandwidth and radiation patterns were also greatly affected by the addition of Li$_2$CO$_3$. With increasing amount of Li$_2$CO$_3$, the bandwidth of ceramic monopole antenna was increased to 81.7 %, but the gain was reduced to -10.03 dBi. Also radiation patterns were so distorted and showed low dB value by increasing of dielectric loss.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.275-280
• /
• 1999

This study was conducted to investigate the effects of $CO_2$ concentration(310 or 950$\mu$ mol.mol$^{-1}$ ) and air current speed(0.3, 0.5, 0.7 or 0.9m.s$^{-1}$ ) on the growth and development of eggp1ant Plug seedlings (Solanum melongena L.) under artificial 1ighting. For the treatment of $CO_2$ enrichment, stem length and diameter, the ratio of stem length to stem diameter, plant height, leaf area, net photosynthetic rate, top dried weight were significantly different at 1% level. Stem length of plug seedlings decreased at the condition under enriched $CO_2$ and high air current speed above plug stand. Stem diameter of plug seedlings increased and plant height decreased with the increasing $CO_2$ concentration. Plug seedlings had maximum net photosynthetic rate at the air current speed of 0.7m.s$^{-1}$ . Net photosynthetic rate at $CO_2$ concentration of 950$\mu$mol.mol$^{-1}$ increased by 46% than those at 310$\mu$mol.mol$^{-1}$ . Thus $CO_2$ enrichment would be effective for the production of plug seedlings with high quality.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.114-121
• /
• 1994

A $Ba_{2}Co_{2-x}Zn_{x}Fe_{12}O_{22}(x\;=\;0.0~2.0,\;Co_{2-x}Zn_{x}Y)$ powder was prepared by a oxidation--coprecipitation method and sintered at $1150~1250^{\circ}C$ for 4 hours. The microstructures and magnetic properties(saturation magnetization, Curie temperature), complex permeability of sintered body were measured As increasing Zn content from x = 0 to 2.0 in $Co_{2-x}Zn_{x}Y$, the real value of complex permeased from 7 GHz to 1 GHz. Because of resonance in few GHz range, Y-type hexagonal ferrite is rmre applicalble than spinel ferrite in high frequency range, and more research would be necessary to find the mechanism of the second resonance observed in higher frequency.