• Journal of Climate Change Research
• /
• 제7권4호
• /
• pp.477-484
• /
• 2016

In general, $CH_4$ concentrations generated in combustion facilities are known to be ppm units. In most cases, $CH_4$ samples are collected in Tedlar bags and transported to laboratories for analysis. Considering this fact, in the present study, an attempt was made to find out how long samples can be stored in cases where they are kept in bags and transported as a preliminary study for sampling. According to the results of the experiment using simulated gases (1 ppm, 5 ppm, 10 ppm) in Tedlar bag, $CH_4$ was safe up to 240 hr which is the full time. In the case of simulated gases are containing 4 kind gases ($N_2$, $CO_2$, $CH_4$, and $N_2O$). Field samples (samples of obtained by collecting combustion facilities' exhaust gases) are known to contain highly reactive substances (for example NOx, SOx, and VOCs) and may affect each other. In the present study, one site sample was secured from each of a bituminous coal combustion facility and an LNG combustion facility and whether the concentrations of $CH_4$ gas would change over time (24 hr, 96 hr, 144 hr, 192 hr) was checked. Since site samples could not be analyzed on the day of collection, an experiment was started 24 hr after the time point of sampling to analyze the samples. As with the results of analysis of the simulated gas (240 hr), the results of analysis using the site sample indicated that it could be stored for the full study period 192 hr. Therefore, it was judged that if 192 hr would be taken after sampling before the sample would be analyzed, the concentration value should be reliable.

• Journal of the Korean Chemical Society
• /
• 제43권4호
• /
• pp.393-400
• /
• 1999

Dendritic carbosilanes based on hyperbranched polycarbosilanes as core molecule have been prepared The core molecules were obtained by the use of hydrosilation of $HSiMe_{3-n}$$(CH_2CH=CH_2)_n$(n=2; $AB_2$,3;$AB_3$type). The hyperbranched core $AB_2\;and\; AB_3$ type polymers were generated to higher molecular dendritic carbosilanes Gn+1 by the use of hydrosilation and alkenylation sequence. The Gn+2P generations were not obtained as unified molecules by the use of hydrosilation with $HSiMeCl_2$. Gn and Gn+1 type polymers were produced to polysilol by the reaction of 9-BBN and alkali medium oxidation of hydroborated compounds. The degree for reaction has been controlled by the NMR spectroscopy.

• Journal of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.369-372
• /
• 1972

The dissociation constants of dibasic carboxylic acids $(HOOC(CH_2)_nCOOH$, n = 0~4] in methanol, N, N-dimethylformamide and acetonitrile have been determined by the potentiometric method with a glass electrode. The difference between over-all dissociation constants in each other solvent is found to be of the same order of magnitude, and the $K_1/K_2$ ratios in aprotic dimethylformamide and acetonitrile are much greater than those in protic methanol and water.

• Bulletin of the Korean Chemical Society
• /
• 제18권3호
• /
• pp.305-310
• /
• 1997

The synthesis and characterization of the platinum heterocyclic carboxaldehyde thiosemicarbazone complexes [NC5H4CRNNC(S)NHR'PtCl] (R=H, R'=CH3(1); R=CH3, R'=CH3(2); R=CH3, R=H(3)) and diphenylphosphinophenyl carboxaldehyde thiosemicarbazone complexes [Ph2PC6H4CHNNC(S)NHRPtCl] (R=CH3(5); R=iC3H7(6); R=Ph(7)) are described. Compounds 1-3 were prepared by reaction of Pt(SEt2)2Cl2 with 2-acetylpyridine-4-alkylthiosemicarbazone in the presence of NEt3. Compounds 5-7 were prepared using Pt(SEt2)2Cl2 in toluene with diphenylphosphinophenyl carboxaldehyde alkylthiosemicarbazone. The compounds have been characterized by microanalysis, NMR (1H, 13C, 31P) spectroscopy, and single-crystal X-ray diffraction. X-ray single crystal diffraction analysis reveals that compound 5 is a mononuclear platinum compound with P,N,S-coordination mode.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.45-46
• /
• 2013

Stabilization characteristics of highly $N_2$-diluted $CH_4-O_2$ flame in an axially two-section porous inert medium were experimentally investigated for its application to the waste gas scrubber in semiconductor manufacturing processes. The flame behaviors were observed with respect to the fuel and $N_2$ flow rates and the equivalence ratios. As a result, four kinds of flame behaviors such as stable, flashback crossing the interface, blowout and sudden extinction were observed. It was also found that there exists two flame regime divided by a critical fuel flow rate. In addition, the flame stability was discussed based on the $N_2$ index which means the abatement capacity of our combustor in scrubbing the waste gas from the semiconductor processes.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 한국결정학회 2002년도 정기총회 및 춘계학술연구발표회(한국결정학회)
• /
• pp.11-11
• /
• 2002

• Applied Chemistry for Engineering
• /
• 제23권3호
• /
• pp.253-258
• /
• 2012

The effects of active sites and valence states were investigated over $Pd/TiO_2$ catalyst on simultaneous oxidation of $CH_4$ and CO. The Pd species (PdO) crystallite size increased with increasing Pd loadings, which results in enhancement of the activity of $CH_4$ oxidation. Different results from the activity of $CH_4$ and CO oxidation were shown to be dependent on the Pd valence state on the surface of the catalyst prepared through a thermal treatment. XRD and $H_2-TPR$ analysis confirmed that $Pd^{2+}$species was predominated in the calcination catalyst, while $Pd^0$species was predominated in the reduction catalyst. Additionally, it could be found that the valence state of Pd was a more important factor on the catalytic activity than that of factors as the surface area and pore volume. The reaction mechanism of $CH_4$ and CO followed by the valence state of Pd could be identified using FT-IR analysis.

• Membrane Journal
• /
• 제30권4호
• /
• pp.269-275
• /
• 2020

In this study, CO₂ separation experiment was performed on a CH₄/CO₂ mixed gas using a ceramic hollow fiber membrane contactor (HFMC). In order to fabricate high-performance HFMC, experiments were conducted to manufacture high-permeability hollow fiber membranes, and the prepared hollow fiber membranes were evaluated through N₂ gas permeation experiments. HFMC for CH₄/CO₂ mixed gas separation was manufactured using the manufactured high-permeability hollow fiber membrane. In the experiment, mixed gas of CH₄/CO₂ (34.5% CO₂, CH₄ balance) and monoetanolamine (MEA) was used, and the effect of CO₂ removal efficiency on the flow rate of the absorbent was evaluated. The CO₂ removal efficiency increased as the liquid flow rate increased, and the CO₂ absorption flux also increased with the liquid flow rate.

• Journal of the Korean Chemical Society
• /
• 제36권2호
• /
• pp.191-196
• /
• 1992

Reaction of N,N-dimethylaniline(N,N-DMA) and iodine in $CHCl_3,\;CH_2Cl_2 : CHCl_3$(1:1), $CH_2Cl_2$(1:1), and CH2Cl2 has been studied kinetically by using conductivity method. Pseudo first-order rate constants ($k_{obs}$) and second-order rate constants ($k_{obs}$/[N,N-DMA]) are dependent on the N,N-DMA concentration. Second-order rate constants obtained were decreased with increasing N,N-DMA concentration. We analysed these results on the basis of formation of charge transfer complex as a reaction intermediate. From the construction of reaction scheme and activation parameters for the formation and transformation of charge transfer complex. The equilibrium constants decreased when the dielectric constant of solvent was increased, and the value is 1.9${\sim}$4.2$M^{-1}$. The rate of transformation are markedly affected by the solvent polarity.${\Delta}H^{\neq}$ is 6.3-12.6kJ/mol, and ${\Delta}S^{\neq}$ is large negative value of -234J/mol K.

• Journal of the Korea Organic Resources Recycling Association
• /
• 제7권2호
• /
• pp.57-64
• /
• 1999

The purpose of this study is to establish effective conditions for controlling $CH_4$, $N_2O$ emission from organic Waste / wastewater treatment processes. Continuous and batch experiments were conducted to treat the micro algae from polluted and eutrophicated lakes through the thermophilic oxic process. The microalgae used were mainly Microcystis sp.(collected from eutrophic lake) and Chlorella sp. (cultured in laboratory) Wasted cooking oil was added by aid-heating source. Physico-chemical components of sludges and microalgae were analyzed. In batch experiments, air supply was changed from 50ml/min to 150ml/min. The temperature. water content and drained water were affected by the air flow rate at initial stage. However, there was almost no influence of air flow rate on them in middle and last stages. At air flow rate of 100ml/min, the degradation rate of organic material was higher than that at other air flow rates. $CO_2$ concentration in exhaust was proportional to the strength of aeration, especially at initial stage when degradation was active. $CH_4$ with low concentration was detected only at starting stage when air diffusion was not enough. $N_2O$ production was not affected by variation of air supply. In continuous experiments no matter what the dewatering methods (with PAC and without PAC) and media (wood chip and reed chip) were changed, $N_2O$ was almost not affected by variation of injected air. Result showed that the reed chips using for lake purification could be used as media for thermophilic oxic process in lake and marshes area. $CO_2$ concentration was not so much affected by the change of dewatering methods and media types. $CH_4$ was not detected in the experimental period. So it can be shown that the thermophilic oxic process had been well operated in wide handling conditions regardless of media and dewatering methods.