• 동력기계공학회지
• /
• 제18권4호
• /
• pp.43-51
• /
• 2014

In this paper, transient temperature and vibration characteristics of a brushless DC (BLD(c) motor are studied for external load (165W~495W) and rotational speed (2000 rpm~4000 rpm). For experiment, a simple measurement system is developed to allow a change in load and speed for measuring transient temperature and vibration simultaneously. Temperature and vibration were also measured under the conditions of natural convection and forced convection. Vibrations in the directions of x-axis (#Ch1), y -axis (#Ch2) and z -axis (#Ch3) were obtained by three accelerometers and temperature was obtained by a thermo-couple with respect to time until the motor is steady. Experimental results show that the amplitude of vibration is higher in the order of z-axis (#Ch3), x -axis (#Ch1) and y-axis (#Ch2) and the amplitude of vibration at the forced convection conditions is 10.6% to 17.8% lower than that of vibration at the natural convection. However, the ratio of the vibration value is similar on average regardless of external convection condition.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권3호
• /
• pp.439-446
• /
• 2014

Many studies on methane ($CH_4$) and nitrous oxide ($N_2O$) emissions from livestock industries have revealed that livestock production directly contributes to greenhouse gas (GHG) emissions through enteric fermentation and manure management, which causes negative impacts on animal environment sustainability. In the present study, three essential values for GHG emission were measured; i.e., i) maximum $CH_4$ producing capacity at mesophilic temperature ($37^{\circ}C$) from anaerobically stored manure in livestock category ($B_{0,KM}$, Korean livestock manure for $B_0$), ii) $EF_{3(s)}$ value representing an emission factor for direct $N_2O$ emissions from manure management system S in the country, kg $N_2O-N$ kg $N^{-1}$, at mesophilic ($37^{\circ}C$) and thermophilic ($55^{\circ}C$) temperatures, and iii) $N_{ex(T)}$ emissions showing annual N excretion for livestock category T, kg N $animal^{-1}$ $yr^{-1}$, from different livestock manure. Static incubation with and without aeration was performed to obtain the $N_2O$ and $CH_4$ emissions from each sample, respectively. Chemical compositions of pre- and post- incubated manure were analyzed. Contents of total solids (% TS) and volatile solid (% VS), and the ratio of carbon to nitrogen (C/N) decrease significantly in all the samples by C-containing biogas generation, whereas moisture content (%) and pH increased after incubation. A big difference of total nitrogen content was not observed in pre- and post-incubation during $CH_4$ and $N_2O$ emissions. $CH_4$ emissions (g $CH_4$ kg VS-1) from all the three manures (sows, layers and Korean cattle) were different and high C/N ratio resulted in high $CH_4$ emission. Similarly, $N_2O$ emission was found to be affected by % VS, pH, and temperature. The $B_{0,KM}$ values for sows, layers, and Korean cattle obtained at $37^{\circ}C$ are 0.0579, 0.0006, and 0.0828 $m^3$ $CH_4$ kg $VS^{-1}$, respectively, which are much less than the default values in IPCC guideline (GL) except the value from Korean cattle. For sows and Korean cattle, $N_{ex(T)}$ values of 7.67 and 28.19 kg N $yr^{-1}$, respectively, are 2.5 fold less than those values in IPCC GL as well. However, $N_{ex(T)}$ value of layers 0.63 kg N $yr^{-1}$ is very similar to the default value of 0.6 kg N $yr^{-1}$ in IPCC GLs for National greenhouse gas inventories for countries such as South Korea/Asia. The $EF_{3(s)}$ value obtained at $37^{\circ}C$ and $55^{\circ}C$ were found to be far less than the default value.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1490-1492
• /
• 1994

Diamond thin films were deposited on Si substrate from $CH_4-H_2-O_2$ system by MWPECVD at the condition of power of 800W, pressure of 80torr, $H_2$ flow rate of $75{\sim}81sccm$, $O_2$ flow rate of $0{\sim}3.8sccm$, $CH_4$ flow rate of $4.8{\sim}9sccm$, substrate temp, of $950{\sim}1010^{\circ}C$ and deposition time of 5hr. The deposited films were characterized by SEM, XRD and Raman spectroscopy. The growth rates of thin films and particles was measured. Good quality were synthesized at 40% of oxygen concentration which 6% of fixed metane concentration, and at 50%. Its deposition rates were $2.4{\mu}m/h$ respectively. As oxygen concentration increased, it was known that the broad peak of $1350 cm^{-1}$ was shifted to $1332cm^{-1}$ due to etching of carbon component.

• 한국염색가공학회지
• /
• 제14권3호
• /
• pp.11-18
• /
• 2002

The preparations of deodorizing fibers using $\textrm{TiO}_2$ have been investigated. $\textrm{TiO}_2$ is known to be an excellent photocatalyst for the degradation of organic and inorganic contaminants in water. $\textrm{TiO}_2$ catalyst have been supported on the glass fiber by a dip-coating procedure. The resulting materials have been characterized by XRD and SEM. The immobilized catalysts were tested in the photocatalytic degradation of $\textrm{NH}_3$, $\textrm{CH}_3\textrm{SH}$ and $\textrm{CH}_3\textrm{CHO}$. The deodorant activity(D.A.) of these deodorizing fibers was measured by chromogenic gas detector tubes. The efficient deodorant activity results have been achieved through the increase of $\textrm{TiO}_2$ sol concentration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1156-1158
• /
• 1993

Undoped ZnO films were prepared on Soda lime glass using pyrosol deposition method starting from the solutions composed of $ZnO(CH_3COO){_2}\;2H_2O-H_2O-CH_3OH$. Surface morphology revealed ZnO films were polycrystalline above $400^{\circ}C$ substrate temperature in $H_2O$ only solvent $H_2O-CH_3OH$ solvent revealed more good result than $H_2O$ only solvent. the lowest resistivity of as-deposit ZnO films was 4 ${\Omega}$-Cm and transmittance at 550nm was 85%. post-annealing of as-deposited films in a vacuum leads to s reduction in resistivity without affecting the optical transmittance.

• Bulletin of the Korean Chemical Society
• /
• 제15권9호
• /
• pp.743-748
• /
• 1994

Photochemical reactions of saccharin with tertiary amines were explored. Saccharin was found to undergo an acid-base reaction with N-trimethylsilylmethyl-N,N-diethyl amine to form N-trimethylsilylmethyl-N,N-diethyl ammonium saccharin salt which is in equilibrium with free saccharin and N-trimethylsilylmethyl-N,N-diethyl amine insolution. Photoreaction of N-trimethylsilylmethyl-N,N-diethyl ammonium saccharin in $CH_3OH\;or\;CH_3CN$ results in the generation of desilylmethylated product, N,N-diethyl ammonium saccharin mainly along with benzamide. Photoreaction of N-methylsaccharin with N-trimethylsilylmethyl-N,N-diethyl amine in $CH_3OH$ leads to the production of o-(N-methylcarbamoyl)-N-ethylbenzenesulfonamid e as the major product along with N-methylbenzamide as the minor product. On the other hand, photoreaction of N,N,N-triethyl ammonium saccharin, generated from saccharin and triethylamine, produces N-methylbenzamide as the exclusive product. These photoreactions are quenched by oxygen indicating that triplets of saccharin and N-methylsaccharin are the reactive excited states. Based on the consideration of the redox potentials of saccharin and N-trimethylsilylmethyl-N,N-diethyl amine, and the nature of photoproducts, pathways involving initial triplet state single electron transfer are proposed for photoreactions of the saccharins with the ${\alpha}$-silylamine.

• Bulletin of the Korean Chemical Society
• /
• 제24권11호
• /
• pp.1659-1663
• /
• 2003

$Al_2O_3$ thin films were grown on H-terminated Si(001) substrates using dimethylaluminum isopropoxide [DMAl: $(CH_3)_2AlOCH(CH_3)_2$], as a new Al precursor, and water by atomic layer deposition (ALD). The selflimiting ALD process by alternate surface reactions of DMAI and $H_2O$ was confirmed from measured thicknesses of the aluminum oxide films as functions of the DMAI pulse time and the number of DMAI-$H_2O$ cycles. Under optimal reaction conditions, a growth rate of ~1.06 ${\AA}$ per ALD cycle was achieved at the substrate temperature of $150\;^{\circ}C$. From a mass spectrometric study of the DMAI-$D_2O$ ALD process, it was determined that the overall binary reaction for the deposition of $Al_2O_3\;[2\;(CH_3)_2AlOCH(CH_3)_2\;+\;3\;H_2O\;{\rightarrow}\;Al_2O_3\;+\;4\;CH_4\;+\;2\;HOCH(CH_3)_2]$can be separated into the following two half-reactions: where the asterisks designate the surface species. Growth of stoichiometric $Al_2O_3$ thin films with carbon incorporation less than 1.5 atomic % was confirmed by depth profiling Auger electron spectroscopy. Atomic force microscopy images show atomically flat and uniform surfaces. X-ray photoelectron spectroscopy and cross-sectional high resolution transmission electron microscopy of an $Al_2O_3$ film indicate that there is no distinguishable interfacial Si oxide layer except that a very thin layer of aluminum silicate may have been formed between the $Al_2O_3$ film and the Si substrate. C-V measurements of an $Al_2O_3$ film showed capacitance values comparable to previously reported values.

• 분석과학
• /
• 제28권3호
• /
• pp.182-186
• /
• 2015

본 연구는 상온에서 과망간산칼륨 (KMnO₄)과 망간아세테이트 (Mn(CH₃COO)₂·4H₂O) 수용액을 반응시켜 초산구리 (Cu(CH₃COO)₂·H₂O) 수용액을 공침한 다공성 CuO/MnO₂ 촉매에 대한 물리화학적 특성에 대해 분석하였다. 합성방법은 KMnO₄과 Mn(CH₃COO)₂·4H₂O의 반응 몰비율을 0.3:1, 0.6:1, 1:1로 반응시켜 초산구리 수용액을 망간아세테이트 투입량 대비 10~75 wt%로 공침시켜 구리이온을 담지시켰다. 제조된 촉매는 TGA/DTA, XRD, SEM 및 BET를 통해 촉매에 대한 물리화학적 특성을 분석하였고, 그 결과 반응 몰비율 변화에 따라 γ-MnO₂, α-MnO₂로 상변이가 이루어 졌으며, 반응 몰비율이 0.6:1 일 때 비표면적이 253 m²/g을 갖는 다공성 CuO/γ-MnO₂ 촉매가 제조되었다.

• Bulletin of the Korean Chemical Society
• /
• 제24권7호
• /
• pp.911-915
• /
• 2003

Two liquid chromatographic chiral stationary phases (CSPs) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid were successfully applied in the resolution of racemic tocainide and its analogues. In the resolution of tocainide, especially, the CSP containing N-CH₃ amide tethering groups was quite effective, showing clear baseline resolution (RS: 2.66) with reasonable enantioselectivity ( a: 1.25). Consequently, the CSP containing N-CH₃ amide tethering groups is expected to be useful to monitor the enantiomeric composition of tocainide in clinical samples. In addition, the chromatographic behaviors for the resolution of tocainide and its analogues on the two CSPs were found controllable by varying the content and the type of organic and acidic modifiers in aqueous mobile phase.

• Restorative Dentistry and Endodontics
• /
• 제34권2호
• /
• pp.120-129
• /
• 2009

본 연구에서는 DSP (dentin sialoprotein)에서 유래된 합성 펩타이드를 동물실험 모델에 적용하여 치수노출 부위에서 상아질 재생을 확인하고, 기존 치 수복조제와의 성능 비교를 통해 새로운 치수복조제로서의 가능성을 확인하고자 하였다. 6마리 비글견의 73개의 치아를 이용하여, 실험적으로 치수를 노출하고 직접 치수 복조술을 시행하였다. 사용한 치수복조제는 (1) $Ca(OH)_2$ (CH군) (2) DSP유도 합성 펩타이드 (PEP군) (3) 합성 펩타이드와 $Ca(OH)_2$ 혼합제 (PEP+CH군) (4) White MTA (WMTA군) 이다. 노출된 치수에 치수복조제를 적용한 후 와동은 강화형 글라스 아이오노머로 충전하였다. 시술 후 2주, 1 개월 및 3개월에 각각 2마리씩 비글견을 희생시키고 조직시편을 제작하였다. 시편은 H&E 염색 후 광학 현미경으로 치수 염증 반응과 경조직 형성 정도를 관찰하였다. PEP군에서는 17개의 시편 중 3 개의 시편에서만 경조직 형성을 관찰할 수 있었으며, 대부분의 시편에서 적절한 치수 회복을 관찰할 수 없었다. PEP군은 CH군에 비해 심한 염증반응을 보이고, 경조직 형성은 불량하였다. CH군과 WMTA군은 기계적으로 노출된 치수에서의 염증반응과 경조직 형성에 있어서 유사한 결과를 보였다.