• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• 한국건축시공학회지
• /
• 제15권3호
• /
• pp.281-289
• /
• 2015

본 연구에서는 $CO_2$ 양생 효과를 극대화 할 수 있는 ${\gamma}-C_2S$와 MgO와 같은 $CO_2$ 흡수 물질을 혼입한 시멘트 페이스트의 $CO_2$ 양생 효과에 관한 연구를 위하여 W/B를 40%로 설정하고 혼화재료 ${\gamma}-C_2S$와 MgO를 90% 다량 치환하여 혼화재료, $CO_2$ 양생 유무에 따른 압축강도 측정, 미세 화학분석을 실시하였다. 그 결과 $CO_2$ 양생으로 인해 Plain의 경우 약 1.08배~1.26배의 압축강도 증가 효과가 나타났으며 ${\gamma}-C_2S$와 MgO를 90% 치환한 ${\gamma}-C_2S$, MgO 실험체의 경우, 각각 14.56배~45.7배, 6.5배~10.37배 향상 효과가 나타났다. 이에 따라 미세 화학분석을 실시하여 다량의 $CaCO_3$, $MgCO_3$가 생성된 것을 확인하고 공극 감소의 효과를 확인하였다. 따라서 $CO_2$ 흡수물질 ${\gamma}-C_2S$, MgO를 다량 혼입한 시멘트 페이스트의 $CO_2$ 양생에 의한 압축강도 발현효과가 검증됨을 확인할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.147-150
• /
• 2006

Of the total defects that have occurred recently in the Korean construction market, over 30% are caused by the construction of defective waterproofing, and the phenomenon of air pockets in the waterproofing layer, which is caused by the concrete vapor pressure, is known to be the primary cause of defective waterproofing. Accordingly, in this study the theory about the relationship between water pressure and temperature as well as the damp-proofing volume of concrete and, then, the change of vapor pressure volume was measured and analyzed by making a test sample after spraying a dampness remover and a waterproofing material to a prepared test body. As a result of measuring the water vapor pressure for the surface temperature of the waterproofing layer with the fluid-applied membrane temperature based on about $10^{\circ}C$, which is the average temperature of Seoul, it was found that first, the fluid-applied membrane elevated up to about $40^{\circ}C$, and the water vapor pressure generated from the fluid-applied membrane was about $0.3kgf/cm^2$ when the surface temperature of the waterproofing layer was raised up to about $80^{\circ}C$. Second, when the fluid-applied membrane temperature of the waterproofing layer was raised from $30^{\circ}C\;to\;35^{\circ}C,\;about\;0.1kgf/cm^2$ of water vapor pressure was generated, and when supplying a thermal source to raise the fluid-applied membrane temperature of the waterproofing layer from $35^{\circ}C\;to\;40^{\circ}C$, approximately $0.05kgf/cm^2$ of water vapor pressure was generated.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.319-331
• /
• 2007

The aim of this study is to enhance the flame retardancy by the synergism effect of phosphorus and bromine groups. The flame-retardant polyurethane coatings containing phosphorus and bromine compounds were synthesized. After synthesizing the intermediate products of tetramethylene bis(orthophosphate) (TBOP) and trimethylolpropane/2,3-dibromopropionic acid (2,3-DBP) [2,3-DBP-adduct], the condensation polymerization was performed with four different monomers of two intermediate products, 1,4-butanediol, and adipic acid to obtain four-components copolymer. In the condensation polymerization, the content of phosphorus was fixed to be 2wt%, and the content of 2,3-DBP that provides bromine component was varied to be 10, 20, and 30wt%, and we designated the prepared modified polyesters containing phosphorus and bromine as DTBA-10C, -20C, -30C. Average molecular weight and polydispersity index of the preparation of DTBAs were decreased with increasing 2,3-DBP content because of increase of hydroxyl group that retards reaction. We found that the thermal stability of the prepared DTBAs increased with bromine content at high temperature.

• 대한수학회논문집
• /
• 제18권1호
• /
• pp.105-115
• /
• 2003

It is well known that there exists a regular branched covering map from T$^2$ onto $\={C}$ iff the ramification indices are (2,2,2,2), (2,4,4), (2,3,6) and (3,3,3). In this paper we construct (count-ably many) chaotic homeomorphisms induced by hyperbolic toral automorphism and regular branched covering map corresponding to the ramification indices (2,2,2,2). And we also gave an example which shows that the above construction of a chaotic map is not true in general if the ramification indices is (2,4,4) and also show that there are no chaotic homeomorphisms induced by hyperbolic toral automorphism and regular branched covering map corresponding to the ramification indices (2,3,6) and (3,3,3).

• 한국건설관리학회논문집
• /
• 제24권2호
• /
• pp.70-78
• /
• 2023

선행연구에서는 지중경사계의 문제점인 1) 지중경사계관 설치의 어려움, 2) 단면 변위 파악의 한계성, 3) 인력 중심의 계측 방식을 해결하기 위한 2D LiDAR 센서 기반의 흙막이 벽체 변위 계측 시스템을 개발하였다. 본 연구의 목적은 선행연구에서 개발된 흙막이 벽체 변위 계측 시스템 내 탑재될 변위 분석 알고리즘을 선정하는 것이다. 변위 분석 알고리즘 선정 결과, 변위 추정 오차가 2mm인 M3C2 알고리즘이 흙막이 벽체 변위 분석 알고리즘으로 선정되었다. 본 연구 결과에서 선정된 M3C2 알고리즘이 흙막이 벽체 변위 계측 시스템에 탑재되고 수차례의 현장 실험을 통해 변위 분석 결과의 신뢰성이 담보될 경우 흙막이 벽체 변위 계측 시스템이 현행 계측관리 대비 변위 계측의 편리성 측면에서 효과적으로 흙막이 벽체의 변위를 관리할 수 있을 것으로 판단된다.

• 한국산림과학회지
• /
• 제85권2호
• /
• pp.280-287
• /
• 1996

강원대학교(江原大學校) 임과대학(林科大學) 부속연습림(附屬演習林)내의 임도밀도가 상이한 3유역(유역(流域) A : 6.67m/ha, B : 5.52m/ha 및 C : 미개설(未開設))의 산지급류하천을 대상으로 임도개설 전 후인 1994년 및 1995년의 강우량 변화에 따른 부유토사의 유출량 변화를 분석한 결과 다음과 같은 결론을 얻었다. 1. 일강우량(日降雨量)이 적은 5~6월 사이에는 1994년과 1995년 모두 일유출량(日流出量)이 $0.25{\times}10^4m^3/day$ 이하였으나, 호우기(豪雨期)인 7~8월에는 일강우량에 비례하여 강우기간 중에는 $5.0{\times}10^4m^3/day$ 이상을 나타내는 등 일유출수량은 일강우량의 증감에 민감하게 반응하였다. 그러나 일유출량이 $25{\times}10^4m^3/day$ 이상은 1994년에는 2회였으나, 1995년에는 7회로 강우량이 풍부하였다. 2. 부유토사량은 임도개설전의 일강우량(日降雨量) 74mm, 92mm 및 120mm와 임도개설후의 일강우량 21mm 및 47mm에는 3유역 모두 하천수(河川水) 규제기준인 25mg/l 이하였다. 그러나 192mm의 강우에는 C유역은 변화가 없었으나, A와 B유역의 평균 부유토사량은 1,525mg/l 및 775mg/l으로 하천수 규제기준의 61배 및 31배였으며, 강우종료후 35시간동안 지속적으로 유출되었다. 3. 최대부유토사량(最大浮遊土砂量) 역시 임도개설전의 강우와 임도개설후의 적은 강우에서는 하천수 규제기준 이하였다. 그러나 일강우량 192mm인 경우에 A, B유역의 최대부유토사량은 하천수 규제기준씩 526배와 108배인 13,150mg/l 및 2,690mg/l을 기록하여 토사유출에 따른 수질오염을 시각적으로 파악할 수 있었다. 이상과 같이 임도개설이 부유토사 유출에 크게 영향을 미치며, 특히 임도밀도가 높은 유역일수록 강우량이 증가함에 따라 다량의 토사가 유출되고 있음이 확인되었으므로 부유토사의 생산원(生産源)인 임도비탈면 보호를 위한 식생공(植生工) 및 토목공(土木工)은 물론 침사지(沈砂池)와 같은 방재시설(防災施設)에 대한 대책을 강구해야 할 것이다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.63-66
• /
• 2002

In this study, it does a high volume flyash substituted concrete experiments in two curing temperature circumstances - 35$^{\circ}C$, 2$0^{\circ}C$. High volume flyash concrete is tested in fresh concrete properties and hardeded concrete properties. In the fresh concrete test items, there is slump, air contents, concrete setting tests. 3, 7, and 28 days water curing compressive strength is measured in the hardened concrete test. The purpose of this study is to submit a various flyash concrete data for application to field. The result of this study is that the best strength is developed at the plain concrete cured 2$0^{\circ}C$ and Mixing F43 shows the best strength among specimens which cured at 35$^{\circ}C$

• 한국CDE학회논문집
• /
• 제10권3호
• /
• pp.179-187
• /
• 2005

The usage of mixed 2D and 3D CAD data of commercial CAD systems is required in the construction practice. Sometimes 3D wireframe model is required by end-users when 2D CAD data is delivered. However, current KOSDIC can not represent 3D CAD data, because it has been developed as a 2D drawing delivery standard. Therefore, this study is to provide exchange and sharing of mixed 2D and 3D CAD data that add 3D wireframe model in the KOSDIC. To achieve this purpose, the authors have investigated the 3D CAD entities of commercial CAD systems, and have analyzed STEP standards providing 3D wireframe model. The result, the authors have extracted 3D CAD common entities based wireframe model which shall be added in the KOSDIC. This study can be beneficial by using the developed data model for heterogeneous CAD systems, and by providing the representation of mixed 2D and 3D CAD data in construction practice such as GIS, piping system, and so forth.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.788-799
• /
• 2008

Since the late 20C, a lot of fashion designers have considered about new construction system in fashion. Many arguments about architectural form and construction system have being supported on enlargement of range of functionalism fashion through the consideration about new shape and combination among various any other spheres. Modular concept, which is able to divide complex construction of integration into separated basic unit and use various and liberal arrangements, is regarded alternative idea of economic construction that creates new shape and constructive beauty through the simple operation and changing combination continuously. Specially, fashion designs of Yoehlee Teng, John Ribber, and Galya Rosenfeld are estimated that they are effectively utilized architectural modular system pursuing multi-function and multi-change in fashion. Modular system utilized in fashion construction will be classified as follows: 1) layering system of Yoehlee Teng, 2) combine system of john Ribber, and 3) lego system of Galya Rosenfeld. This thesis will presents beneficial guide for simple and practical functionalism fashion design development in 21C.